ICS-17A(B)型电子皮带秤：
威泰克公司ICS-17A(B)型电子皮带秤，动态累计误差≤±0.25%，适用于工业企业的称重过程控制，如检测生产量，控制产品的定量装载和检测库存等场合，为工厂自动化控制和现代化管理提供重要的数据信息。
系统组成：
威泰克公司ICS-17A(B)电子皮带秤主要由四部分组成：威泰克公司ICS-17A(B)型称重桥架（托辊可选）,S型称重传感器,60-12C型测速传感器及测速滚筒，WTC2001/WTC3001型积算器。电源：220VAC ,50HZ功率：50W
称重桥架：
ICS-17A型称重桥架在双杠杆上装有四组托棍，采用两只拉式传感器中间支撑，外侧支撑采用无磨檫耳轴支点。有效克服偏载对精度的影响，这种封闭装置可以防震、防潮、防腐及防止物料堆积，因而在恶劣的环境中不发生使用刀口装置和轴承装置带来的问题。称重装置的主梁采用矩形钢管，这使整个称重桥架具有足够的刚性、较小的自重、外表积灰面积达到。
为了保证整个系统的稳定性，高精度电阻应变片式传感器安装于受拉部位，以减少非线性误差。
为了保证整个系统的稳定性，高精度电阻应变片式传感器安装于受拉部位，以减少非线性误差。
ICS-17B型称重桥架在单杠杆上装有两组托辊，采用两只拉式传感器支撑，适用给料距离较短的皮带输送机。
测速传感器：
威泰克公司ICS-14, ICS-17,ICS-20,ICS-30系列电子皮带秤标准配置均采用60-12C型测速传感器，它可以直接安装在尾部滚筒、测速滚筒或测速滚轮上，测速滚筒/滚轮安装在回程皮带的双表面，消除了皮带打滑造成的影响，该测速传感器为数字式无炭刷脉冲发生器，皮带运行时，测速传感器发出一系列速度脉冲，每一个脉冲代表皮带行程的一个单位长度，脉冲频率和皮带速度成正比。
测速传感器外壳材质为铸铝，能适用于露天工作环境。
交流脉冲发生器不需要调整或更换炭刷。
测速传感器外壳材质为铸铝，能适用于露天工作环境。
交流脉冲发生器不需要调整或更换炭刷。
称重传感器：
威泰克公司ICS-14, ICS-17,ICS-20系列电子皮带秤均采用拉式电子应变式称重传感器。
主要技术参数：
系统精度：±0.25% 称重范围：1~3500t/h
皮带宽度：500~2400mm 皮带速度：0~4m/s
皮带输送机倾角：<18°
电源电压：220Vac（-15%~+10%）50Hz±2
环境温度：仪表-10℃--50℃，机械-35℃--65℃；
weightec ics-17a (b) electronic belt scale with dynamic accumulative error ≤±0.25% is suitable for the weighing process control of industrial enterprises, such as detecting the production quantity, controlling the quantitative loading of products and detecting the inventory, etc., to provide important data information for factory automation control and modern management. System composition: vetek ics-17a (b) electronic belt scale consists of four main components: vetek ics-17a (b) type weighing bridge (idler optional), s type weighing sensor,60-12c type speed measuring sensor and speed measuring drum, wtc2001/wtc3001 type integrator. Power:220VAC,50HZ Power:50W Weighing Bridge: The ICS-17A type weighing bridge is fitted with four sets of support rods on the double lever, which are supported by two tension sensors in the middle, and the outside support with the non-Sassafras axis fulcrum. This kind of sealing device can prevent vibration, moisture, corrosion and material accumulation, so the problems caused by using knife edge device and bearing device do not occur in harsh environment. The main girder of the weighing device adopts rectangular steel pipe, which makes the whole weighing bridge frame have enough rigidity, small weight, and the surface ash deposit area reaches the lowest. In order to ensure the stability of the whole system, the high precision resistance strain gauge type sensor is installed in the tensile position to reduce the nonlinear error. The ICS-17B weighing bridge is equipped with two sets of rollers on the single lever, supported by two pull-type sensors, suitable for belt conveyors with short feeding distance. Speed sensor: vetech ics-14, ics-17, ics-20, ics-30 series electronic belt scale standard configuration all use 60-12c type speed measurement sensor, it can be directly mounted on the tail drum, speed measurement drum or speed measurement roller, speed measurement drum/roll wheel is mounted on the double surface of the return belt, eliminate the impact caused by the belt skid, the speed measurement sensor is digital no carbon brush pulse generator, when the belt runs, the speed measurement sensor emits a series of speed pulses, each one represents a unit length of the belt stroke, the pulse frequency is proportional to the belt speed. Speed sensor shell material is cast aluminum, can be used in open-air working environment. The AC pulse generator does not need to adjust or replace the carbon brush. Weighing sensors: vetech ics-14, ics-17, ics-20 series electronic belt scales all use pull-type electronic strain type weighing sensors. Main technical parameters: System accuracy:±0.25% weighing range:1~3500t/h Belt width:500~2400mm belt speed:0~4m/s Belt conveyor inclination:
