当前位置：北京伯英科技有限公司>>>>卷对卷式柔性LB膜分析仪

卷对卷式柔性LB膜分析仪

返回列表页

参考价

面议

具体成交价以合同协议为准

产品型号

品牌

厂商性质其他

所在地

在线询价收藏产品

更新时间：2022-10-04 12:43:30浏览次数：520次

联系我时，请告知来自智慧城市网

产品分类 品牌分类

暂无信息

北京伯英科技有限公司

经营模式：其他

商铺产品：2条

所在地区：

询价 给他留言

产品简介

卷对卷式柔性LB膜分析仪卷对卷式柔性LB膜分析仪仪器是一种多功能的LB莫分析仪，具有柔性镀膜，刚性镀膜，垂直镀膜，水平镀膜功能

详细介绍

卷对卷式柔性LB膜分析仪

卷对卷式柔性LB膜分析仪仪器是一种多功能的LB莫分析仪，具有柔性镀膜，刚性镀膜，垂直镀膜，水平镀膜功能。

卷对卷式柔性LB膜分析仪仪器用于在较长的柔性基底（如保鲜膜式柔性带状基底）上连续沉积单分子薄膜，也可把大尺寸刚性衬底粘接在皮带上进行镀膜，可进行无限多次LB薄膜沉积，可控制柔性基底顺时针或逆时针旋转，沉积X,Y,Z多种类型的LB薄膜结构。同时具备垂直镀膜与水平镀膜功能。衬底可以是卷式铝箔、卷式PET塑料薄膜等。设备包含镀膜槽，卷对卷样品传动装置，卷对卷转动滑障与水平移动滑障，表面压探头与镀膜头，自动进样装置：注射泵与蠕动泵，控制器，电脑。
卷对卷式柔性LB膜分析仪液体界面单分子薄膜镀膜仪器可进行无限多次薄膜沉积，可控制柔性基底顺时针或逆时针旋转，沉积x、y、z型结构的薄膜。

卷对卷式柔性LB膜分析仪技术指标：

柔性基底镀膜尺寸范围：长度可达3m，宽度可达16.5cm

柔性基底传送速度范围： 0.4625-117 mm/s，调整步阶0.007725 mm/s。

镀膜井尺寸：200x180x200 mm (w-d-h)。刚性基底尺寸。

侵入液体的基片尺寸：不小于170x170x170 mm (w-d-h)，兼容常规片状固体基片。

刚性基底面积：不小于170x170mm。

表面压传感器：带2个表面压传感器，分别测量镀膜区域与补样区域的表面压值，表面压传感器灵敏度：0.01 mN/m，测量范围：0-80 mN/m。

卷对卷式LB膜分析仪LangmuirBlodgett trough LT-310 is experimental research apparatus intended for deposition of mono- and multimolecular films according to the LangmuirBlodgett (LB) and similar techniques. It is also suitable for deposition of thin layers of various nature on solid substrates. Additional units and accessories enable the monomolecular layer deposition for versatile substrate types: a winding unit realizes deposition of LB layers onto flexible substrates (tape) and onto flat rigid substrates attached to the winded tape; rig for horizontal precipitation allows to deposit monomolecular layers onto submerged substrate according to Langmuir-Schaefer (horizontal precipitation, HP) technique by the liquid level lowering (draining).

卷对卷式LB膜分析仪LT-310 can be applied for

application of monomolecular films on solid samples according to the Langmuir-Blodgett (LB) technique or to the horizontal precipitation (HP) technique
deposition of multimolecular films using corresponding layer-by-layer technique
formation of mono- and multimolecular composite coatings on solid surfaces
modification of the surface properties (hydrophilic behavior, optical, electrical properties etc. )
fundamental research in ultrathin film fabrication and their use as insulating and protective coatings, molecular electronic elements, in biology for creation of bilayer lipid membranes etc.

FEATURES

卷对卷式LB膜分析仪技术参数：

Number of barriers:	One
Full free surface area:	855 cm²
Maximum free surface area confined with the barrier:	815 cm²
Compressed (effective) area:	620 cm²
Liquid medium volume:	9600-10900 cm³
Dipping well:	not smaller than 250x180x200 mm (w-d-h)
Maximum dimensions of the immersed substrate:	170x170x170 mm (w-d-h)
Travel range of the movable horizontal barrier:	350 mm
Velocity range of the barrier motion:	- single side compression 0.01 to 50 mm/min
Dipper mechanism stroke:	86 mm (vertical position of the unit can be adjusted manually)
Dipper mechanism velocity range:	0.0140 mm/min,
Step of the dipper mechanism velocity change:	0.1 mm/min
Possibility of altering different monomolecular layers deposition:	Available
Delay between the layers deposition:	0100000 s
Surface tension sensor:	based on Wilhelmy plate 15x15 mm (vertical position of the sensor can be adjusted manually)
Working range of the surface tension sensor:	0-80 mN/m (stepped and fine adjustment of the range are available)
Sensitivity of the surface tension sensor:	0.05 mN/m
Number of surface tension sensors:	One / Two (two sensors my be used by default)
Doser for substance feed to aqueous surface:	- syringe pump: with substance reserve 1 ml (syringes of up to 10 ml applicable), motion range of leading rod 65 mm - peristaltic pump with flow rate about 0.157 ml per one revolution of motor
Overall dimensions:	Trough without mounted rig not bigger than 490x280x260 mm (w-d-h); Maximum size with installed accessories 660x340x500 mm (w-d-h); Control unit 200x293x80 mm (w-d-h); Total weight (with all accessories and control unit) 21 kg
Supply voltage:	240 V / 2.3 A / 50 Hz
Control voltage supplied from control unit to elements of the trough:	+5 V; -5 V; +15 V
Power consumption:	Average 100 W, peak not more than 500 W (without host PC)
Additional accessories:	Substrate clamping holder for fixing a flat sample on the dipper lever. Rig for film application by the horizontal precipitation method (by liquid medium draining)*. A mountable unit for tape substrate winding with set of guides. A syringe pump doser or peristaltic pump to feed substance film on liquid interface. Rotating barrier for substance film transfer into the deposition zone. One draining nozzle at bottom of the dipping well and 3 additional nozzles in shallow area, all nozzles for connecting tube of 5 mm inner diameter.

TECHNIQUES

卷对卷式LB膜分析仪技术：

Deposition of X-type LB film
Deposition of Y-type LB film
Deposition of Z-type LB film
Horizontal precipitation (HP) method (by liquid medium draining) provides surface modification by extremely uniform and homogenous monolayer films (see, for examplethis paper). HP method allows transferring of monolayer films at various surfaces simultaneously from huge variety of surfactants (both in solid and liquid state) despite of polar head structure. The process of deposition is simple and fast. In particular, the surface of metallized silicon wafer can be modified by HP method within 3-5 minutes.


Roll-To-Roll deposition technique engages additional accessories in the set of LB trough LT-310 to deposit monomolecular film on tape (continuous deposition on flexible substrate). In LT-310, extraction angle of the exiting portion of tape may be adjusted in range 30-90^owith step 5^o

实验数据：

1. SEM images of the monolayer of silica spheres D1 = 250 nm (a, b) and D2 = 550 nm (c−f) deposited on the PET film using the roll-to-roll LB method. * from M. Parchine, J. McGrath, M. Bardosova, M. E. Pemble,Large Area 2D and 3D Colloidal Photonic Crystals Fabricated by a Roll-to-Roll Langmuir–Blodgett Method, Langmuir,32, 5862 (2016)