当前位置：北京金山恒丰科技有限公司>>智能集中控制系统>>XTP FT HD 4K 用于 HDMI 信号的 XTP 4K 光纤发送器

XTP FT HD 4K 用于 HDMI 信号的 XTP 4K 光纤发送器

返回列表页

参考价

面议

具体成交价以合同协议为准

产品型号

品牌

厂商性质其他

所在地

在线询价收藏产品查看联系电话

联系方式：查看联系方式

更新时间：2021-10-12 14:43:47浏览次数：359次

联系我时，请告知来自智慧城市网

产品分类 品牌分类

  智能集中控制系统

全部产品列表

暂无信息

北京金山恒丰科技有限公司

经营模式：其他

商铺产品：455条

所在地区：

询价 给他留言

产品简介

通过单根光纤传输视频、音频、双向 RS-232 和红外控制及以太网信号支持分辨率高达 4K 的计算机和视频信号带可选音频的 HDMI 环通符合 HDCP 标准用于视音频控制的双向 RS-232 和红外插入

详细介绍

Extron XTP FT HD 4K 是一款 XTP® 发送器，可通过单根光纤延长视频、音频、双向控制和以太网信号。这款符合 HDCP 标准的发送器可支持分辨率高达 4K、带 4:4:4 色度取样的视频信号。为了简化集成，它采用一路带可选音频控制的 HDMI 环通，能对模拟立体声音频信号进行加嵌。而且以太网扩展及双向 RS232 和红外插入功能还提供了局域网接入和远程视音频设备控制。通过 OM4 多模光纤可将信号传送至 700 m 远的距离，通过单模光纤可传输至最远 10 km 的距离。XTP FT HD 4K 非常适用于需要安全、长距离地传输像素对像素的视频、音频和控制信号的 XTP Systems®。

特性

通过单根光纤传输视频、音频、双向 RS-232 和红外控制及以太网信号

支持分辨率高达 4K 的计算机和视频信号

带可选音频的 HDMI 环通

符合 HDCP 标准

HDCP 可视确认 — 当处理 HDCP 加密的内容时，如果视频输出连接至一个不符合 HDCP 标准的显示设备，图像解析度转换器即会输出一个全屏的绿色信号，可以从视觉上立刻确认被保护内容无法显示在此显示设备上

用于视音频设备控制的双向 RS-232 和红外插入

以太网扩展

EDID 管理器 (EDID Minder®) 自动地管理已连接设备之间的 EDID 通信

密钥管理器 (Key Minder®) 持续地验证 HDCP 标准，用于快速、可靠的切换

可选的模拟立体声音频输入加嵌

音频输入增益及衰减调整

兼容所有的 XTP 产品

经 JITC 认证

随附外置 Extron Everlast™ 电源，产品编号 #70-1174-01 — 该通用型电源具有经验证的高可靠性和低功耗，能够降低运行成本

Extron Everlast 电源可享受 7 年部件及人工保修

Video
Gain	Unity
Resolution range	Up to 2560x1600 @ 60 Hz* or 4K (4096x2160) @ 24 Hz, UHD (3840x2160) @ 30 Hz, UHD @ 60 Hz with 4:2:0 chroma subsampling * reduced blanking
Signal type	Single-link HDMI (or DVI-D or DisplayPort)
Color bit depth	8, 10, or 12 bits — subject to the maximum data rate limit
Maximum data rate	8.91 Gbps (2.97 Gbps per color)
Maximum pixel clock	300 MHz (600 MHz for 4K rates with 4:2:0 chroma subsampling)
Formats	RGB and YCbCr digital video
Standards	DisplayPort 1.1, DVI 1.0, HDMI 1.4a, HDCP 1.4

Video input and loop-through
Number/signal type	1 single link HDMI (or DVI-D or DisplayPort) input 1 single link HDMI (or DVI-D) loop-through
Connectors	2 female HDMI type A: 1 input, 1 loop-through

Optical fiber interconnection between transmitter and receiver
Number/signal type	1 set of proprietary signals
Connectors	1 LC fiber connector
Operating distance
NOTE Operating distance is approximate. These are typical maximum distances that may vary depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks.
Singlemode	10 km (6.21 miles) with singlemode cable
Multimode	400 m (1312') with 50 µm OM3 2000 MHz bandwidth laser optimzed multimode cable 700 m (2297') with 50 µm OM4 4700 MHz bandwidth laser optimzed multimode cable
NOTE Multimode units are compatible with OM1 and OM2 multimode cables, but at reduced operating distances.
Nominal peak wavelength
Singlemode	1490 nm, 1550 nm, 1310 nm
Multimode	850 nm, 980 nm, 780 nm
Data rate	8.5 Gbps
Transmission power
Singlemode	-6 dBm, typical
Multimode	-5 dBm, typical
Maximum receiver sensitivity
Singlemode	-15 dBm, typical
Multimode	-13 dBm, typical
Optical loss budget
Singlemode	9 dB, maximum
Multimode	8 dB, maximum

Audio
Gain	Unbalanced output: 0 dB; balanced output: +6 dB
Frequency response	20 Hz to 20 kHz, ±0.5 dB
THD + Noise	<0.1%, 20 Hz - 20 kHz at nominal level
S/N	>90 dB, at maximum balanced output (unweighted)
Crosstalk	≤-80 dB @ 1 kHz, fully loaded
Stereo channel separation	>80 dB @ 1 kHz
Sampling rates	32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz
Bit depths	16, 20, 24 bit

Audio input
Number/signal type	1 analog stereo, balanced/unbalanced or 1 digital audio, de-embedded from HDMI
Connectors	(1) 3.5 mm captive screw connector, 5 pole 1 female HDMI type A (shared with video input)
Source formats	LPCM up to 7.1/24-bit/192 kHz, Dolby Atmos™, Dolby TrueHD, Dolby Digital Plus™, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-HD Master Audio™, DTS-HD, DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2 Channel, analog stereo
Impedance	10k ohms, unbalanced, 20k ohms balanced
Nominal level	+4 dBu (1.23 mVrms) balanced, -10 dBV (316 mVrms) unbalanced
Maximum level	+21 dBu balanced, +15 dBu unbalanced
Input gain adjustment	-18 dB to +24 dB, 1 dB steps, adjustable
NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu

Communications — transmitter
USB control ports	1 front panel female mini USB B
USB standards	USB 2.0, low speed
Program control	Extron control/configuration program for Windows® Extron Simple Instruction Set (SIS™)

Communications — external device (pass-through, unidirectional or bidirectional)
Serial control pass-through port	RS-232 (+5 V) via a (1) 3.5 mm, 5 pole captive screw connector (uses 3 poles) (connector is shared with the IR control port)
Baud rates	Up to 115200 baud
Protocol	Data bits = 5 - 8 Stop bits = 1 or 2 Parity = odd, even, none Flow control = XON, XOFF, none
Serial control pin configuration	1 = Tx, 2 = Rx, 3 = GND
IR control port	(1) 3.5 mm, captive screw connector, 5 pole (uses 3 poles) (connector is shared with the RS-232 control port) TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 56 kHz
IR control pin configuration	3 = GND, 4 = IR Tx, 5 = IR Rx
Ethernet pass-through port	1 female RJ-45 connector
Ethernet data rate	10/100Base-T, full duplex with autodetect

General
Power supply	External Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 1.5 A, 18 watts
Power consumption
Device	8.1 watts
Device and power supply	10 watts
Temperature/humidity	Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling	Convection, vents
Thermal dissipation
Device	26.2 BTU/hr
Device and power supply	32.8 BTU/hr
Mounting
Rack mount	Yes, with optional 1U high rack shelf
Furniture mount	Yes, with optional under-desk mounting kit
Enclosure type	Metal
Enclosure dimensions	1.0" H x 8.75" W x 6.0" D (half rack wide) (2.5 cm H x 22.2 cm W x 15.2 cm D) (Depth excludes connectors.)
Product weight	1.6 lbs (0.7 kg)
Vibration	ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance	CE, c-UL, UL, IEC 60825-1, C-tick, FCC Class A, ICES, VCCI Complies with the appropriate requirements of RoHS and WEEE.
Product warranty	3 years parts and labor
Everlast power supply warranty	7 years parts and labor
NOTE All nominal levels are at ±10%.
NOTE Specifications are subject to change without notice.