行业产品

  • 行业产品

北京金山恒丰科技有限公司


当前位置:北京金山恒丰科技有限公司>>智能集中控制系统>>TLP Pro 725M/T 7" 桌面、墙面安装型 TouchLink Pro 触摸屏

TLP Pro 725M/T 7" 桌面、墙面安装型 TouchLink Pro 触摸屏

返回列表页
参  考  价面议
具体成交价以合同协议为准

产品型号

品       牌

厂商性质其他

所  在  地

联系方式:查看联系方式

更新时间:2021-10-12 14:28:21浏览次数:390次

联系我时,请告知来自 智慧城市网

经营模式:其他

商铺产品:455条

所在地区:

产品简介

具有 1024x600 的分辨率和 24 位色深的 7 " 电容式触摸屏坚固、防刮擦和抗污迹的大猩猩玻璃®屏幕更快的四核处理和 8 倍高的内存可安装在两单元接线盒内,或固定在墙面、讲台或包括玻璃

详细介绍


Extron TLP Pro 725M 是一款具有多种增强特性的 7" 墙面安装型 TouchLink® Pro 触摸屏。我们这款的 TouchLink Pro 触摸屏采用全新的高性能四核处理器、8 倍高的内存以及带防刮擦和抗污迹的康宁®大猩猩玻璃®1024x600 高分辨率电容式触摸屏。TLP Pro 725M 还具有方便的以太网供电 (PoE) 功能,可通过单根以太网电缆接收电源及进行通信。它非常适用于需要一款外观时尚并可*定制界面的墙面安装型触摸屏的应用环境。

TLP Pro 725M 可与任何 Extron IP Link® Pro 控制处理器配合使用,设计用于那些需要对多种信号源设备进行完整的交互式控制的视音频系统应用环境。TouchLink Pro 触摸屏使用标准的网络架构工作,利用可靠且高性价比的以太网电缆就能轻松安装。

所有的 TouchLink Pro 触摸屏均可通过 Extron GUI Designer 软件进行定制。这款功能强大的界面设计软件提供了用于各种房间和演示环境的即用型模板。这些设计可以被直接用于某些应用中,或通过简单地改变个别的图形要素而定制使用。

特性

具有 1024x600 的分辨率和 24 位色深的 7" 电容式触摸屏 — 色彩鲜艳的无边框玻璃显示屏提供更加灵敏的控制
表面。

现代感的设计可符合任何环境的审美需求

坚固、防刮擦和抗污迹的大猩猩玻璃®屏幕 — 康宁大猩猩玻璃比标准玻璃更加坚固且防刮擦,同时还具有更好的触摸灵敏度、色彩饱和度和亮度。

更快的四核处理和 8 倍高的内存 — 极快的反应和的用户体验。

可安装在两单元接线盒内,或固定在墙面、讲台或包括玻璃在内的其它平面上

兼容所有的 IP Link Pro 控制处理器

数字输入能与多种设备,如传感器和交换机连接

以太网供电功能可通过单根以太网电缆提供电源及进行通信

内置扬声器 — 提供按键音反馈。

光感应器可根据环境照明的变化自动调整屏幕的亮度

可配置的红色和绿色状态指示灯用于指示房间的状态:可用或正在使用

如果触摸屏未与控制处理器通信,系统连接状态指示灯就会提供视觉反馈

高速 USB 2.0 端口 — 用于未来系统扩展。

自动时钟同步使触摸屏能够显示准确的时间和日期

节能特性:
- 可调整的休眠计时器能让触摸屏进入休眠模式
- 运动探测器可将触摸屏激活

使用 GVE (GlobalViewer Enterprise) 资源管理软件对此设备进行远程管理、监视和控制

使用 Extron 控制系统软件进行*的定制 — GUI Designer 可配合 Global Configurator PlusGlobal Configurator Professional Global Scripter 使用。

 7.gif


TLP Pro 725M Series and TLS 725M

Display
   Screen type TFT Active matrix color LCD
   Size 7" (17.8 cm), measured diagonally
   Resolution 1024x600 (WSVGA)
   Pixel density 170 PPI
   Aspect ratio 17:10
   Color depth 24 bit, 16.7 million colors
   Transparency 8 bit
   Brightness 420 nits (cd/m2)
   Contrast 700:1
   Backlight LED
   Viewing angle ±75° horizontal, +70°/-75° vertical
   Touch screen Capacitive

Storage
   SDRAM 2 GB
   Flash 4 GB

Ethernet
   Connectors 1 female RJ-45 connector
   Data rate 10/100/1000Base-T, half/full duplex with autodetect
   Protocols DHCP, DNS, HTTP, HTTPS, ICMP, SFTP, SSH, TCP/IP, UDP/IP
   Default settings Link speed and duplex level = autodetected
IP address = 192.168.254.251
Subnet mask = 255.255.255.0
Default gateway = 0.0.0.0
DHCP = off
DNS = 127.0.0.1

Software
   TLP Pro 725M Series 
      Configuration software Global Configurator Plus and Professional, GUI Designer
      Programming software Global Scripter
      Control apps Extron Control, iGVE
      Resource management software GlobalViewer Enterprise, iGVE
      Utilities Toolbelt, Embedded web page
   TLS 725M 
      Configuration software Room Agent

Sensors
   Motion sensor On/off
   Light sensor Auto/manual

USB
   Quantity/type 1 high-speed USB 2.0
   Connectors 1 Micro-B receptacle
   Standards USB 2.0, USB 1.1, USB 1.0 compatible
   Max. data rates Low speed (1.5 Mbps), full speed (12 Mbps), high speed (480 Mbps)

Digital input
   Quantity/type 1 digital input (configurable)
   Connectors (1) 3.5 mm captive screw connector, 2 pole
   Digital inputs 
      Input voltage range 0 to 24 VDC, clamped at +30 VDC
      Input impedance ≥10k ohms
      Programmable pullup 1k ohms to +5 VDC
      Threshold low to high 2.8 VDC
      Threshold high to low 2.0 VDC
   Pin configuration 1 = Digital input, 1 = Gnd

Audio output
   Speaker output 1 mono, 89 dB Max. SPL @ 0.1 m
   Frequency response 750 Hz to 20 kHz, ±5 dB
   Playback format(s) 
      Container format WAV (Microsoft RIFF)
      Encoding LPCM (uncompressed)
      Bit depth Unsigned 8-bit
Signed 16-bit
Signed 24-bit
Signed 32-bit
      Sampling rate Up to 192 kHz
      Audio channels Mono or stereo

General
   Power supply Not included
   Power input requirements Power over Ethernet (PoE 802.3af, class 3)
   Power consumption — Power injector (XTP PI 100)
      Device 8.5 watts
      Device and power injector 11.6 watts
   Auxiliary power output 
      USB 5 VDC, 275 mA
   Temperature/humidity Storage: -4 to +140 °F (-20 to +60 °C) / 10% to 90%, noncondensing
Operating: +32 to +104 °F (0 to +40 °C) / 10% to 90%, noncondensing
   Cooling Convection, vents on back
   Thermal dissipation — Power injector (XTP PI 100)
      Device 24.3 BTU/hr
      Device and power injector 34.7 BTU/hr
   Mounting Wall, furniture, or rack
   Enclosure type Plastic

   Enclosure dimensions 5.05" H x 7.24" W x 1.20" D
(128 mm H x 184 mm W x 30 mm D)
Touchpanel projects 1.01" (26 mm) from the mounting surface
   Product weight 1.10 lbs (0.50 kg)
   Regulatory compliance CE, C-tick, c-UL,FCC Class B, ICES, RoHS, UL, VCCI, WEEE
   Product warranty 3 years parts and labor; touchpanel display and overlay components are covered for 1 year
    NOTE    All nominal levels are at ±10%.
    NOTE    Specifications are subject to change without notice.


其他推荐产品更多>>

感兴趣的产品PRODUCTS YOU ARE INTERESTED IN

智慧城市网 设计制作,未经允许翻录必究 .      Copyright(C) 2021 https://www.afzhan.com,All rights reserved.

以上信息由企业自行提供,信息内容的真实性、准确性和合法性由相关企业负责,智慧城市网对此不承担任何保证责任。 温馨提示:为规避购买风险,建议您在购买产品前务必确认供应商资质及产品质量。

会员登录

×

请输入账号

请输入密码

=

请输验证码

收藏该商铺

登录 后再收藏

提示

您的留言已提交成功!我们将在第一时间回复您~