当前位置：北京金山恒丰科技有限公司>>智能集中控制系统>>XTP R HDMI 用于 HDMI 信号的 XTP 接收器

XTP R HDMI 用于 HDMI 信号的 XTP 接收器

返回列表页

参考价

面议

具体成交价以合同协议为准

产品型号

品牌

厂商性质其他

所在地

在线询价收藏产品

更新时间：2021-10-12 14:34:21浏览次数：114次

联系我时，请告知来自智慧城市网

产品分类 品牌分类

  智能集中控制系统

全部产品列表

暂无信息

北京金山恒丰科技有限公司

经营模式：其他

商铺产品：455条

所在地区：

询价 给他留言

产品简介

通过单根 CATx 屏蔽电缆在 100 m 远的距离上接收带嵌入音频的视频、双向 RS-232 和红外及以太网信号支持分辨率高达 1920x1200 的计算机和视频信号，包括 1080p/60 深色和 2K

详细介绍

Extron XTP R HDMI 是一款 XTP® 接收器，可通过单根 CATx 屏蔽电缆在 100 m 远的距离上接收视频、音频、双向 RS-232 和红外及以太网信号。此接收器采用 HDMI 音频解嵌，带数字 S/PDIF 或模拟立体声音频输出。它也可通过以太网扩展、双向 RS-232 和红外插入功能来实现局域网接入和对远端视音频设备的控制。XTP R HDMI 接收器与 XTP Systems® 配合使用，可用于远程终端之间的信号分配和长距离传输。

特性

通过单根 CATx 屏蔽电缆在 100 m 远的距离上接收带嵌入音频的视频、双向 RS-232 和红外及以太网信号

支持分辨率高达 1920x1200 的计算机和视频信号，包括 1080p/60 深色和 2K

用于视音频设备控制的双向 RS-232 和红外插入

符合 HDCP 标准

支持远程供电

强烈建议使用 Extron XTP DTP 24 屏蔽双绞线电缆，以达到的性能表现

EDID 管理器 (EDID Minder®) 自动地管理已连接设备之间的 EDID 通信

密钥管理器 (Key Minder®) 持续地验证 HDCP 标准，用于快速、可靠的切换

以太网扩展

HDMI 音频解嵌，带模拟立体声和数字 S/PDIF音频输出

音频输出音量调节和*

可选择的 HDMI 音频直通

2 个继电器，用于控制房间功能

兼容所有的 XTP 产品

经 JITC 认证

Video
Gain	Unity
Resolution range	Up to 1920x1200, 2K, or 1080p (HDTV) reduced blanking
Signal type	Single-link HDMI (or DVI-D*)
Digital video	RGB digital video (DVI and HDMI standards) or Y, Cr, Cb digital component video (HDMI), actively buffered (supports all single-link DVI (if using an optional adapter) and HDMI standards from 640x480 @ 60 Hz to 1920x1200 @ 60 Hz)
EDID and DDC	Supports Extended Display Identification Data (EDID) and Display Data Channel (DDC) data using DVI and HDMI standards. EDID and DDC signals are actively buffered.
HDCP	Compliant with High-bandwidth Digital Content Protection (HDCP) using DVI and HDMI standards
HPD	Supports hot plug detection (HPD) of display as a pass-through signal.
Maximum data rate	6.75 Gbps (2.25 Gbps per color)
Maximum pixel clock	165 MHz
Formats	RGB and YCbCr digital video
Standards	DVI 1.0, HDMI; HDCP 1.1

Interconnection between transmitter and receiver
Connectors	1 female RJ-45 per unit
Termination standards	TIA/EIA T568B
Signal transmission distance	330' (100 m) using shielded twisted pair or XTP DTP 24 cable
Cable requirements	Solid conductor, 24 AWG or better
Cable recommendations	400 MHz bandwidth, STP (Shielded Twisted Pair)
NOTE Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance.

Video output
Number/signal type	1 single link HDMI (or DVI-D*)
Connectors	1 female HDMI type A

Audio
Gain	Unbalanced output: 0 dB; balanced output: +6 dB
Frequency response	20 Hz to 20 kHz, ±0.05 dB
THD + Noise	<0.1% @ 20 Hz - 20 kHz at nominal level
S/N	>90 dB, at maximum balanced output (unweighted)
Crosstalk	≤-80 dB @ 1 kHz, fully loaded
Stereo channel separation	>80 dB @ 1 kHz
Sampling rates	32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz
Bit depths	16, 20, 24 bit

Audio output
Number/signal type	1 analog stereo (2-channel), balanced/unbalanced 1 digital audio, embedded with HDMI output 1 digital audio via S/PDIF output connector
Connectors	(1) 3.5 mm captive screw connector, 5 pole 1 female HDMI type A (shared with video output) 1 female RCA jack
Supported formats
HDMI	LPCM up to 7.1/24-bit/192 kHz, Dolby TrueHD, Dolby Digital Plus, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-HD Master Audio, DTS-HD, DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2 Channel
S/PDIF	LPCM up to 7.1/24-bit/192 kHz, Dolby Digital EX, Dolby Digital 5.1, Dolby Digital 2/0 Surround, Dolby Digital 2/0, DTS-ES Discrete 6.1, DTS-ES Matrix 6.1, DTS Digital Surround 5.1, DTS 2 Channel
Analog	Analog stereo audio
Impedance
Analog	50 ohms unbalanced, 100 ohms balanced
Digital	75 ohms (for S/PDIF output)
Maximum level (Hi-Z)	>+12 dBV balanced; +6 dBV unbalanced
Gain error	±0.5 dB channel to channel
Volume control range	-100 dB to 0 dB (control 0 to 100 in 1 dB steps)
NOTE Attenuation = volume number minus 64. The default is 0 dB = volume number 64.
NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu

Communications — receiver
USB control ports	1 front panel female mini USB B
USB standards	USB 2.0, low speed
Program control	Extron control/configuration program for Windows® Extron Simple Instruction Set (SIS™)

Communications — external device (pass-through, unidirectional or bidirectional)
Serial control port input/output	1 set of proprietary signals on a female RJ-45 jack
Serial control port output/input	RS-232 (+5) via (1) 3.5 mm, 5-pole captive screw connector (uses 3 poles) (connector is shared with IR control port)
Baud rates	Up to 115200 baud
Protocol	Data bits = 5 - 8 Stop bits = 1 or 2 Parity = odd, even, none Flow control = XON, XOFF, none
Serial control pin configuration	1 = Tx, 2 = Rx, 3 = Gnd
Ethernet pass-through port	1 female RJ-45 connector
Ethernet data rate	10/100Base-T, half/full duplex with autodetect
IR control port	(1) 3.5 mm, captive screw connector, 5 pole (connector is shared with RS-232 control port) TTL level (0 to 5 V) modulated infrared control from 30 kHz up to 40 kHz
IR control pin configuration	3 = Gnd, 4 = IR Tx, 5 = IR Rx
Relay number/type	2 normally open relays
Relay control connectors	(1) 3.5 mm captive screw connectors, 4 pole
Relay control contact rating	24 V, 1 A

General
Power supply	External Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 1 A, 12 watts
Power consumption
Device	8.9 watts, 12 VDC
Device and power supply	10.8 watts, 12 VDC
NOTE Each XTP receiver can be powered either locally by an external power supply or remotely using an optional power injector.
Temperature/humidity	Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling	Convection, vents on sides and top
Thermal dissipation
Device	29.9 BTU/hr
Device and power supply	36.6 BTU/hr
Mounting
Rack mount	Yes, with optional 1U high rack shelf
Furniture mount	Yes, with optional under-desk mounting kit
Enclosure type	Metal
Enclosure dimensions	1.0" H x 8.75" W x 6.0" D (half rack wide) (2.5 cm H x 22.2 cm W x 15.2 cm D) (Depth excludes connectors.)
Product weight	1.6 lbs (0.7 kg)
Shipping weight	4 lbs (2 kg)
Vibration	ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety	CE, c-UL, UL UL rated for use in plenum airspaces: meets UL 2043 for heat and smoke release, excluding the power supply.
EMI/EMC	CE, C-tick, FCC Class A, ICES, KCC, VCCI
Environmental	Complies with the appropriate requirements of RoHS, WEEE.
NOTE **CE and FCC testing is conducted with STP (shielded twisted pair) cable.
Product warranty	3 years parts and labor
Everlast power supply warranty	7 years parts and labor
NOTE All nominal levels are at ±10%.
NOTE Specifications are subject to change without notice.