型号：FW6105/SL轻便式移动工作灯【出售】 返回列表页

FW6105/SL轻便式移动工作灯
FW6105/SL portable working lamp
适用范围：铁路、电力、*、*、船舶、石油化工等单位的各种易燃易爆场所现场作业、事故抢修、异常情况处理等对高亮度大范围夜间照明及其它工作现场提供移动照明。
Applicable scope: railway, electric power, public security, military, marine, petrochemical and other units of the various inflammable and field operation, accident repair, exception handling and other lighting on the high brightness range of night lighting and other work site.

型号：FW6105/SL轻便式移动工作灯【出售】性能特点
Performance characteristics
◆灯头可任意扳动调整照射角度，提高工作效率，电池箱设有电量实时显示功能，无须任何操作可随时了解电池剩余电量，方便灯具的充放电维护；灯头可方便转换照明聚光、泛光功能，适合各类照明现场需求。
The lamp can be arbitrary the light angle adjustment, improve work efficiency, the battery box is provided with a battery real-time display function, without any operation can understand the remaining battery charge and discharge lamps, convenient maintenance and convenient lighting; lamp can be converted light, flood light, suitable for all kinds of lighting field requirements.
◆采用*品牌LED光源9只串并联使用，发光效率高，使用寿命长达10万小时，超低功耗，强光可连续点灯10小时以上，工作光达到16小时，*了各类作业工作照明时长的需要。
We adopt international top brand LED source 9 series parallel, high luminous efficiency, long service life of 100 thousand hours, low power consumption, strong light can be more than 10 hours of continuous light, light work up to 16 hours, fully meet the needs of all kinds of long work lighting.
◆高能无记忆电池组可随时充放电，体积小、重量轻、绿色环保、使用寿命长久，自放电率极低，一次充电后半年内储电量不低于满容量的85%。
The high-energy no memory battery can charge and discharge, small volume, light weight, green environmental protection, long service life, low self discharge rate, a charge storage capacity of not less than half a year after the full capacity of 85%.
◆铝合金压铸成型外壳，外表面经高温表面喷涂工艺处理，紧密的内部结构设计，产品轻巧精致，全密封工艺，可在暴雨环境下正常工作，能经受强力碰撞和冲击；
The Aluminum Alloy die-casting shell molding, the surface by high temperature surface spraying process, the internal structure of compact design, lightweight products, full sealing process, it can work normally in the rain environment, can withstand strong collision and impact;
型号：FW6105/SL轻便式移动工作灯【出售】技术参数
technical parameter
序号    参数名称    单位    数值
Number parameter name unit value
1    额定电压    V    14.8
1 rated voltage V 14.8
2    额定容量    Ah    10
2 rated capacity Ah 10
3    LED灯泡    工作电压    V    12
3 LED bulb operating voltage V 12
额定功率    W    27
Rated power W 27
光通量    lm    3200
The luminous flux of LM 3200
平均使用寿命    h    100000
Average service life h 100000
4    连续放电时间    强光    h    10
4 continuous discharge time strong light h 10
工作光        16
Working light 16
5    充电时间    正常使用后    h    8
5 charging time is normally used after h 8
电池耗尽时        ≤10
A battery is less than or equal to 10
6    电池使用寿命    循环    约1000
6 battery life cycle of about 1000
7    外形尺寸    长    mm    254
7 appearance size length mm 254
宽        204
Wide 204
高        640
High 640
8    重量    kg    ≤7
8 weight less than 7 kg
*：
Quality assurance:
感谢您购买本公司的产品，本公司已通过ISO9001-2008质量体系认证，产品严格按照ISO9001标准进行质量控制，产品实行3年保用，在3年内，产品正常使用下出现任何故障，由本公司免费维修。（免材料费和修理费）
Thank you for purchasing our products, the company has passed ISO9001-2008 quality system certification, products in strict accordance with the ISO9001 standards for quality control, products 3 years warranty, in 3 years, any fault occurs under normal operation by the company, free maintenance. (free of charge and repair)
防爆标志：ExedⅡCT6  防护等级：IP65
Explosion proof mark: Exed II CT6 protection class: IP65
使用方法：
Usage method：
1    旋转灯具电池箱上的开关*档为工作光照明，第二档为强光照明，回转即关闭。
1 rotary lamp battery box switch on the first gear for lighting, the second is lighting, turning off.
2    用手扳动灯头，固定灯头的蛇管可任意调整灯头照射角度，*实现*照射角度可调功能。
The 2 is pulled by hand lamp, the lamp cap is fixed coil can adjust the lamp irradiation angle, the full realization of the full range of the irradiation angle adjustable function.
3    一次充足电后可在6个月内随时使用，若长时间不使用，每隔半年应补充电12小时。
3 a full power can be used at any time within 6 months, if the long time does not use, every six months should be 12 hours of electricity.
4    充电时请打开充电口盖，并使用本公司配置的充电器，插上电源（充电器输出插头不须分正负极性），充电器上的充电指示灯为红色，表示正在充电，当红色指示灯变绿色时，表示电池已充满电。电源断电或充电电路出现短路、过流、过热时，充电器上的充电指示灯均不亮。
4 when charging please open the charging port cover, and the use of the company's special charger configuration, plug (charger output plug can be divided to positive and negative polarity), charging charger. The indicator light is red, is charging, when the red light turns green when the battery is full of electricity, said. A short circuit, over current and over heat are short circuit, over current and over heat, and the charging indicator light on the charger is not bright.
5    本灯具采用先进的LED光源，非专业人员请不要随意拆卸灯具结构件或更换灯泡。
5 this lamp uses the international advanced LED light source, the non specialized personnel please do not remove the light fixture structure or change the light bulb.
6    电池箱面板上设有5只5mm绿色LED，当电池电量大于80%以上时，5只LED全显示绿色，电量小于80%时LED自右向左灭一个灯，此时只亮4只LED，当电量小于60%时，只亮3个灯，40%时只亮2个灯，小于20%时只亮1个灯，此时请您充满电后在使用。
6 battery box panel is provided with 5 5mm green LED, when the battery is more than 80%, only 5 LED full display green, capacity is less than 80% LED from right to left out a bright lamp, only 4 LED, when the power is less than 60%, only the 3 bright lights, lit only 2 40% a lamp is less than 20%, only the 1 bright lights, at this point you full power in use.
7    该灯设有过放电保护功能，当电池电压为11.5V时灯光闪烁提示，闪10次后回到原状态照明，此时你的灯具电量显示为红灯，当电压降至11.2V后灯具会自动关灯保护。
The 7 lamp with discharge protection function, when the battery voltage is 11.5V flashing lights that flashed back to the original state of lighting 10 times, at this time the lamp power your display for a red light, when the voltage dropped to 11.2V after the lamp will automatically turn off the lights to protect.
8    聚泛光功能使用方法：灯头设有聚光远距离照明或泛光大面积照明功能供选择使用，把泛光片翻至灯头透光处，并用灯头上的锁扣锁紧泛光片，可实现泛光大面积照明使用，扳开锁扣，泛光片即松开往下翻，此时灯头属聚光远距离照明功能。
8 poly floodlight features to use: lamp with condensing remote lighting or pan lighting functions available in large area, the pan ray turned to light lamp, lamp holder and lock the lock floodlight, can realize the pan China Everbright lighting area, open lock, floodlight piece is loose to turn at this time, a long distance lighting function spot lamp.
警告： 1 充电及拆卸灯具必须在安全场所进行
Warning: 1 charging and removing lamps must be carried out in a safe place
2 每次使用后应及时充电，充电结束后将充电口防尘盖压紧。
2 after each use should be promptly charged, after the end of the charge will be charged mouth dust cover.
注意事项：
Matters needing attention：
1    充电时必须关闭开关，外壳备有温升属正常现像。
1 the switch must be turned off when charging, the shell is equipped with temperature rise is normal.
2    经常检查并保证电池盒盖、灯头前盖、充电口盖等处结构件结合紧密，以增强防水、抗冲击能力。
2 regularly check and ensure the battery cover and the lamp cover at the front cover, charging structure combination, to enhance the waterproof and anti impact capability.
3    不要随意拆卸灯头、电源箱盖及密封件；运输时请把泛光片锁扣在灯头上。
3 do not disassemble the lamp, power supply box cover and seal; please put the pan ray lock in the cap on transportation.
4    在腐蚀性环境中使用后应揩拭表面，保持外壳及透明件的表面清洁，以确保良好的透光度。
4 used in the corrosive environment after wiping surface, keep the surface clean and transparent shell parts, to ensure good transparency.