通信电缆 网络设备 无线通信 云计算|大数据 显示设备 存储设备 网络辅助设备 信号传输处理 多媒体设备 广播系统 智慧城市管理系统 其它智慧基建产品
深圳市时代次方科技有限公司
深圳市时代次方科技有限公司
这个数字到模拟音频转换器是专为无论是家庭或专业音频切换。它同轴或Toslink光纤数字音频信号转换成模拟L / R的音频和用于连接到外部设备，诸如经由STANDAR放大器
数字到模拟音频转换器
Digital to Analog Audio Converter
Table of Contents
1.0 introduction ……………………….…….……...2
2.0 Specifications………………..……..…..….…….4
3.0 Package Contents…………………….…………6
4.0 Panel Descriptions………………………………6
5.0 Connection and Operation……...………………7
Dear Customer
Thank you for purchasing this Audio Converter.
For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference
1.0 Introduction
This Digital to Analog Audio Converter is designed for either home or professional audio switching. It converts Coaxial or Toslink digital audio signals to analog L/R audio and available for connection to an external device such as an amplifier via standard RCA-style jacks. This Converter is small in size and quite easy to install.
This Converter has many features that enable it to perform in a superior manner. Among those features you will find:
1. Converts Coaxial or Toslink digital audio signals to analog L/R audio
2. Supports sampling rate at 32, 44.1, 48 and 96 KHz.
3. 24-bit SPDIF incoming bit stream on left and right channels
4. Provides electromagnetic-noise-free transmission.
5. Easy to install and simple to operate.
2.0 SPECIFICATIONS
Signal Inputs/Output |
|
Input Audio | Coaxial or Toslink digital audio |
Output Audio | L/R audio and 3.5mm |
Connector |
|
Input audio connector | Toslink、1XRCA(Coaxial) |
Output audio connector | 2XRCA（R/L）+ Headphone |
Sampling rate | 32, 44.1, 48 and 96 KHz |
Size(L-W-H) | 55X60X<2MM> |
Weight (Net) | <78g> |
Power Requirement |
|
External Power Supply | 5V DC@<1A> |
Power Consumption | 0.5 watts (max) |
3.0 PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and make sure the following items are contained in the shipping carton:
1).Main unit ().
2). DC 5V Power Supply
3) User’s Manual.
4.0 PANEL DESCRIPTIONS
Please study the panel drawings below and become familiar with the signal input(s);output(s) and power requirements.
5.0 CONNECTION AND OPERATION
Before installation, please make sure all devices you wish to connect have been turned off.
1) Connect the audio source device to the Converter using appropriate Toslink or Coaxial cables.
2) Connect the A/V Receivers or Amplifiers to the Converter using appropriate L/R cable.
3) Insert the DC side of 5v power supply into the converter and then connect the AC side of the power supply into the wall outlet.
Note: When connected to the Toslink and Coaxial cables at the same, the product will give priority to Toslink input
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
智慧城市网 设计制作，未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
