进口卡套式气源球阀
德国托普进口卡套式气源球阀工作原理：
进口卡套式气源球阀适用于中、小口径管路的各种压力、温度和介质下控制接通或截断管路介质的启闭装置;靠介质压力将球体压紧在出口端阀座上,其使用压力和通径受到一定限制.采用90°传动,故开关方便迅速,可以实行快速启闭。
1、通过螺纹机械式推进，卡套螺母向前运动推动后卡套向前，同时后卡套推动前卡套向前运动。
2、球阀通道平整光滑便于管道扫线清洗,可以输送浆液及固体颗粒等介质.
3、采用PTFE(特氟隆)等材料作为密封,具有良好润滑性和弹性,与球体摩擦系小,使用寿命长.
4、启闭迅速,启闭时只需把球体转动90°,方便而迅速.
5、球阀的流体阻力小,全开时球体通道、阀体通道和连接管道的截面积相等,并且成直线想通,介质流过球阀,相当于流过一段直通的管子,在各类阀门中球阀的流体阻力zui小。
6、卡套式球阀广泛应用于水处理设备、化工设备、石化设备、石油设备、造纸设备、采矿设备等等，进，卡套螺母向前运动推动后卡套向前，同时后卡套推动前卡套向前运动。
Germany top import card type gas valve working principle:
Import card type gas ball valve is suitable for medium and small caliber pipeline pressure, temperature and medium under the control of connect or disconnect the line media on-off device; by medium pressure the ball tightly in the outlet end of the valve seat, the pressure and the diameter is restricted. By 90 degrees of transmission, so the switch is convenient and rapid that can be quickly opened and closed.
1, through the screw mechanical propulsion, the card sleeve nut forward movement to push the card sleeve forward, while the back of the card sleeve push forward the front cover.
2, the ball valve channel smooth smooth pipeline cleaning, can transport slurry and solid particles and other media
3, using PTFE (Teflon) materials such as sealing, with good lubrication and elasticity, and the ball friction coefficient of small, long service life.
4, open and close quickly, open and close the ball just turn 90 degrees, convenient and fast
5, ball valve fluid resistance small, open channel, ball valve body passage and the sectional area of the connection pipe is equal, and straight through, medium flow through the valve, the equivalent of a straight through pipe, valve in various types of valves in the fluid of least resistance.
6, sleeve type ball valve is widely used in water treatment equipment, chemical equipment, petrochemical equipment, oil equipment, papermaking equipment, mining equipment, etc., the card sets the forward movement of the rear ferrule nut push forward at the same time, after the card set to push the front sleeve forward movement.
进口卡套式气源球阀特点：
1、用于流路的开通-截断 2、球阀无调节能力，如果系统需要实现流量调节，必须串联调节阀来完成
3、二通球阀的工作压力可达20.6MPa 4、二通球阀的标准形式是水平阀，也可选用角式阀
5、使用介质为氧气时，需采用脱脂处理 6、可面板安装
For the flow of the road - Cut 2, ball valve without the ability to adjust, if the system needs to achieve flow control, the valve must be completed in series
3, the two way ball valve working pressure up to 20.6MPa 4, the standard form of the two way valve is horizontal valve, angle valve can also be used
5, the use of media for oxygen, the need to use degreasing treatment 6, panel installation
进口卡套式气源球阀技术参数：
阀体材料：304、316 阀门口径：DN3-20 阀门压力：1000WOG
连接标准：ASME B16.10、DIN2501 控制方式：手动 密封材料：PTFE、
工作温度：-20℃至+150℃
进口卡套式气源球阀应用领域：
药品、食品、化妆品
Application of imported card sleeve air source ball valve:
Medicine, food, cosmetics
