产品型号：110.03-NK
对拷型遥控器操作说明书
本遥控器是免拷贝机拷贝各种汽车，电门等防盗遥控器，具有拷贝和发射于一体，适合拷贝各种固定码遥控器。可学IC型号有：AX5326-3、PT2262、PT2260、EV1527、FP527、PT2242、HT600、HT680、HT6207、HT6010、HT6012、HT6014、AX5326-4、SMC918、PT2240、HT6013、HT6013、HT12D等遥控器，操作简单，方便快捷，子机可重复使用。
清码:同时按住关锁和解锁,2S后LED灯一闪即灭,然后关锁键保持不动,松开解锁键连续按三次（须在3秒内完成此动作）接下来就快速的闪烁,这表明码已经清除了。
拷贝：左手拿原始遥控，右手拿我们的自拷遥控器，两只遥控尽量靠近（背靠背学习较果更佳），同时按下两只遥控的上锁键，3S后，LED灯会闪烁3下，接下来就快速地闪烁，这表明原始遥控的上锁键的码已经被我们的自拷遥控器学进去了，其它3个按键也是同样的操作。
恢复：当您不小心清除了自拷遥控器的码，您可以同时按下*和铃铛键，3S后，LED灯会闪烁3下，接下来就开始快速点闪烁，这表明自拷遥控器的码被复原了
调频：如果是固定频率型请直接按动遥控器试验，如是可调频率的，如是315MHz，测也可以直接试验，如不是此频率，请用无感调棒调节到所要的频率，可调频率从280MHz—490MHz无级可调，有五金装饰的遥控器请调低3MHz左右以消除五金对频率的影响，如315MHz可以调到312MHz，433MHz可以调到431MHz，这样装上有五金的外壳后频率就会上扬一点到315MHz或433MHz。
03-NK Universal Wireless RF Remote Control Duplicator Frequency Adjustable
Features:
- Universal remote control duplicator can easily copy code from other RF remote control without copying device and control the same original receiver.
- Copy the code one by one, saving the copy memory of each button separay.
- Repeatedly copy code from other RF remote control for million times.
- High quality RF remote with chrome metal frame and 4 chrome buttons.
Application:
- Home/store anit-theft alarm, E-bikes /motorcycles/car alarms, all kinds of door/window controllers, LED and other industrial control
How to use:
- Before starting to copy the code, you need to know the function of each button
- 1. Code Clear
It’s necessary to clear the original codes of the copy code remote control. Press and hold the “arming” button and “disarming” button simutaneously for 2 seconds till the LED indicator flashes 3 times. Keep pressing the “arming” button and release the “disarming” button, then press the “disarming” button for 3 times within 5 seconds. The LED indicator slowly flashes 3 times then becomes fast flash to indicate the code clear is finished
- 2. Code Copy
With the original remote control on your one hand, with the copy code remote control on the other hand, approach the two remote controls to each other as close as possible. Press and hold the button to be learned on the original remote control and the button you want to learn on the copy code remote control simutaneously for 3 seconds, the LED indicator flashes 3 times then becomes fast flash, indicating the code is learned/copied successfully. Repeat the above steps to copy the code of other buttons
- 3. Code Retrive
In case if you lost the codes you are using by accident, don’t worry you can retrive them by following the step below: press and hold the “starting” button and “muting” button simutaneously for 3 seconds, the LED indicator flashes 3 times then becomes fast flash, indicating the codes are retrived now.
- 4. Frequency Adjustment
For fixed frequency copy, you can directly copy the code from other RF remote control. If not, if need to open the cover of the copy remote control and adjust the frequency with the great sense to meet the frequency of original remote control. For example, the frequency of the copy remote is 315MHz, but the original remote is 433MHz, you need to adjust the frequency of the copy remote from 315MHz to 433MHz.
The adjustable frequency range is 280MHz to 490MHz.
