DCS Elevator Touch Screen
General Information
The DCS elevator touch screen with IC card reader can fully utilized the loading capacity of elevators in the dynamic distribution service area. And the DCS elevator touch screen can respond to the passengers in a short time. The limited use of the non-card user or non-privileged personnel can improve the security of the building. Touch screen enables passengers to arrive at the destination floor at a shorter time. The passenger is allocated to different elevators according to two priorities: the shortest response time and the shortest arrival time. The flexible design of panel interface and various installation methods can match various style of the builiding hall, and thus achieve customized service environment and enhance the customer experience. The touch screen adopts glass panel, which overcomes the shortcomings of traditional touch screen.
Product Parameters
Model | ETOUCH-104-DSC | ETOUCH-150-DSC |
Panel Size | 10.4 Inch | 15 Inch |
Power Supply | DC18~36V | DC18~36V |
Consumption | ≤7.5 W | ≤15W |
Active Display Area | 159.5(W)×212.5(H)mm | 305(W)×229(H)mm |
Resolution | 800(W) × 600 (H) dot | 1024(W) × 768 (H) dot |
Viewing Angle (Horizontal) | -70º～70º | -70º～70º |
Viewing Angle | -70º～40º | -70º～70º |
Outer Case Material | ABD plastic with silver spray painting | Aluminum outer case, with gray spray painting and hair-line finish |
Working Temp. | -10℃～60℃ | -10℃～60℃ |
Working Humidity | 10％～90％, Under Non-freezing Condition | 10％～90％, Under Non-freezing Condition |
Interface
The LCD touch display's interface as below.
Touch Panel Selection Buttons
Elevator Direction Guidance
IC Card Reader (which limits the qualified users with different privileges).
Speaker Voice
Display of Time and Date
Standby Interface Display
Display Panel Parameters, Function Selection Parameters,
Floor Display Parameters, Layer Selection System Parameters.
Product Layout
