PRZ6000型全自动石油产品热值测定仪
概述：
适用于测量电力、煤炭、冶金、石化、质检、环保、水泥、造纸、地勘、科研院等行业部门测量煤炭、焦炭、石油、水泥生料，砖坯及其它固体或液体等可燃物的发热量，符合国标GB/T213-2008《煤的发热量测定方法》、GB/T384-1988《石油产品热值测定法》的要求。
特点:
概述：
适用于测量电力、煤炭、冶金、石化、质检、环保、水泥、造纸、地勘、科研院等行业部门测量煤炭、焦炭、石油、水泥生料，砖坯及其它固体或液体等可燃物的发热量，符合国标GB/T213-2008《煤的发热量测定方法》、GB/T384-1988《石油产品热值测定法》的要求。
特点:
采用微机实现测量过程的自动控制和计算，系统采用Windows XP操作系统，操作全过程汉字提示，人机交互，即学即用，按提示操作即可完成试验。在测试的同时可进行数据处理、数据查询、数据修改等其它工作，功能，使用方便。
高度自动化，自动点火、自动注、排水，自动称水重、调水温、只需装好氧弹，仪器便可完成全部测试工作。
电脑控制自动标定仪器热容量，输入相关数据，微机自动换算被测物质的高低位发热量,自动存盘并打印结果。
电脑控制自动标定仪器热容量，输入相关数据，微机自动换算被测物质的高低位发热量,自动存盘并打印结果。
采用串口通信技术，故障率低，自动保护，自动诊断，使用环境宽松。测量精度高分析快，精密测温探头，实时显示温度-时间曲线，方便直观。
低故障率，自保护、自诊断技术、故障查找快捷、便于维护。
简便易用，界面友好，软件容错性好，易学易用。
结果准确，采用独特的冷却校正体系，保证仪器性能的测试稳定性。
6000型微机全自动量热仪作为单筒量热仪系统使用，若对两台热量计进行异步控制，请选用6000B微机全自动(双控)量热仪系统。
技术指标及参数:
使用环境：5-40℃
热容量：约10500J/K
分辨率：0.0001℃
测量精度:符合GB/T 213－2008要求
测试时间：15min左右
外水筒容量 30L
内水筒容量 约2.3L
点火电压 24V
点火时间 6分钟点火
定量误差：≤±1g
测量误差：优于国标
主机功耗：≤40W
电源电压：AC220V±10％50Hz
PRZ6000 automatic petroleum product calorimeter
Overview:
Applicable to the measurement of electricity, coal, metallurgy, petrochemical, quality inspection, environmental protection, cement, paper, geological exploration, scientific research institutes and other industries to measure coal, coke, petroleum, cement raw materials, bricks and other solid or liquid combustibles The calorific value is in line with the requirements of GB/T213-2008 "Determination method of calorific value of coal" and GB/T384-1988 "Measurement method of calorific value of petroleum products".
Features:
The microcomputer is used to realize the automatic control and calculation of the measurement process. The system adopts the Windows XP operating system, and the whole process of Chinese characters prompts, human-computer interaction, that is, ready to use, and the test can be completed according to the prompt operation. In the test, data processing, data query, data modification and other work can be performed, and the function is superior and convenient to use.
Highly automated, automatic ignition, automatic injection, drainage, automatic weighing water, water temperature adjustment, just install a good oxygen bomb, the instrument can complete all testing work.
The computer control automatically calibrates the heat capacity of the instrument, inputs relevant data, and the microcomputer automatically converts the high and low heat of the measured substance, automatically saves the disk and prints the result.
Adopt serial communication technology, low failure rate, automatic protection, automatic diagnosis, and relaxed use environment. High measurement accuracy, fast analysis, precision temperature probe, real-time display of temperature-time curve, convenient and intuitive.
Low failure rate, self-protection, self-diagnosis technology, quick fault finding and easy maintenance.
Easy to use, friendly interface, good software fault tolerance, easy to learn and use.
The results are accurate, using a unique cooling correction system to ensure the test stability of the instrument performance.
The 6000-type microcomputer automatic calorimeter is used as a single-tube calorimeter system. If the two calorimeters are controlled asynchronously, please use the 6000B microcomputer automatic (double control) calorimeter system.
Technical indicators and parameters:
Use environment: 5-40 ° C
Heat capacity: about 10500J/K
Resolution: 0.0001 °C
Measurement accuracy: in line with GB/T 213-2008 requirements
Test time: 15min or so
Outer water tank capacity 30L
The inner water tank capacity is about 2.3L
Ignition voltage 24V
Ignition time 6 minutes ignition
Quantitative error: ≤ ± 1g
Measurement error: better than the national standard
Host power consumption: ≤40W
Power supply voltage: AC220V±10%50Hz
主机功耗：≤40W
电源电压：AC220V±10％50Hz
PRZ6000 automatic petroleum product calorimeter
Overview:
Applicable to the measurement of electricity, coal, metallurgy, petrochemical, quality inspection, environmental protection, cement, paper, geological exploration, scientific research institutes and other industries to measure coal, coke, petroleum, cement raw materials, bricks and other solid or liquid combustibles The calorific value is in line with the requirements of GB/T213-2008 "Determination method of calorific value of coal" and GB/T384-1988 "Measurement method of calorific value of petroleum products".
Features:
The microcomputer is used to realize the automatic control and calculation of the measurement process. The system adopts the Windows XP operating system, and the whole process of Chinese characters prompts, human-computer interaction, that is, ready to use, and the test can be completed according to the prompt operation. In the test, data processing, data query, data modification and other work can be performed, and the function is superior and convenient to use.
Highly automated, automatic ignition, automatic injection, drainage, automatic weighing water, water temperature adjustment, just install a good oxygen bomb, the instrument can complete all testing work.
The computer control automatically calibrates the heat capacity of the instrument, inputs relevant data, and the microcomputer automatically converts the high and low heat of the measured substance, automatically saves the disk and prints the result.
Adopt serial communication technology, low failure rate, automatic protection, automatic diagnosis, and relaxed use environment. High measurement accuracy, fast analysis, precision temperature probe, real-time display of temperature-time curve, convenient and intuitive.
Low failure rate, self-protection, self-diagnosis technology, quick fault finding and easy maintenance.
Easy to use, friendly interface, good software fault tolerance, easy to learn and use.
The results are accurate, using a unique cooling correction system to ensure the test stability of the instrument performance.
The 6000-type microcomputer automatic calorimeter is used as a single-tube calorimeter system. If the two calorimeters are controlled asynchronously, please use the 6000B microcomputer automatic (double control) calorimeter system.
Technical indicators and parameters:
Use environment: 5-40 ° C
Heat capacity: about 10500J/K
Resolution: 0.0001 °C
Measurement accuracy: in line with GB/T 213-2008 requirements
Test time: 15min or so
Outer water tank capacity 30L
The inner water tank capacity is about 2.3L
Ignition voltage 24V
Ignition time 6 minutes ignition
Quantitative error: ≤ ± 1g
Measurement error: better than the national standard
Host power consumption: ≤40W
Power supply voltage: AC220V±10%50Hz
