16扇区测向天线 IsoLOG 3D 160（400MHz-8GHz）

16扇区测向天线
IsoLOG 3D 160（400MHz-8GHz）

Introduction简介
Wide area Multi-Direction finding and RF Tracking-Antenna
超宽范围多方向探查和高频测向天线

安诺尼测向天线IsoLOG 3D 160，频率范围400MHz-8GHz，可扩展20MHz-20GHz，16扇区内置32个天线阵子，包括水平和45度实现360度方向侦测，通过网络可远程手动控制阵子切换或按设备程序自动切换，天线有高密度外壳，适合户外恶劣环境使用，也可以架设安装在车顶，搭配接收机即可组成一个高精度信号侦测定位系统。

特点
>高精度侦测跟踪，搭配安诺尼仪器精度高达2度
>无机械旋转，提供360°覆盖
>高达1uS高频快速切换
>IP3 40dBm（前置放大器处于旁路模式）
>适用超宽带，实时频谱监测
>可独立使用或多套联网组合系统使用
>通过网络PC软件远程控制
>POE网络远程供电，即插即用
>适用户外严峻环境（-30 - 60℃）
>可车辆安装（仅22-25kg系统重量）

Both the antenna and its electronics are protected by a radom(included) , avaliable in any RAL color and with optional prints(standard shipping color is black). The radom is watertight, shock- and heat-proof-in other words, it is extrenmely durable and reliable even in the most adverse conditions.
天线和电子器件受外面的外罩保护，可提供RAL颜色选择外罩的颜色（标准颜色是黑色），并且外罩的材质防水、防震、耐热，可用于户外恶略的环境。也就是说它可以在的条件下也可以可靠使用。

For easy integration in and control over any existing Ethernet network, the antenna only needs a Power-over-Ethernet(PoE) connection. A powerful software for operation on Windows systems include for free. The software offers various tracking and selection setups, e.g. sweep all antennas horizontal or/ａnd vertical, switch all in one sector and a powerfull high speed “chopper mode”. All of this makes it the perfect tool for instantaneous signal tracking. 
为了方便集成和远程控制，天线只需一个PoE远程供电，即可通过现有的网络远程控制，并提供一个可在Windows系统运行的免费控制软件。软件可以设置各种跟踪设置，例如扫描所有的水平极化和或垂直极化天线，切换任何一个扇区和高速切换模式，这些功能非常适用实时跟踪信号。

Each IsoLOG 3D ships complete with a robust radome designed for the most hostile conditions. Close coupling of the IsoLOG and antenna modules reduces cable runs and cable loss and significantly improves performance at higher frequencies. Various directional antenna options are available from 20MHz to 20GHz.
每个IsoLOG 3D都配有坚固的天线罩，专为的环境而设计。 IsoLOG和天线模块的紧密耦合减少了电缆线路和电缆损耗，并显着提高了更高频率的性能。 各种定向天线选项可在20MHz至20GHz范围内选配。

Over large distances, arrays can form a network as part of a wider monitoring network with other IsoLOG antennas. It can be set up anywhere, be it onpaved roads or dirt tracks.
在很远的距离上，可用过网络远程控制形成阵列， 它可以架设在任何地方，无论是铺设的道路还是泥土路。

The IsoLOG 3D is thus the perfect solution for countersurveillance measurements as well as the detection of drones or UAVs (unmanned aerial vehicles). Having just one antenna also makes the IsoLOG 3D ideal for vehicle mounting (e.g. automotive prototypes etc.) and for hidden operations. In addition, as the antenna resembles a satellite dish for camping vans, it is hardly recognizable as special equipment, let alone a tracking device.
因此，IsoLOG 3D是非常适合监视测量以及无人机或无人机（无人驾驶飞行器）检测的解决方案。天线适合原型车辆安装，实现隐藏操作，此外，天线外罩类似卫星天线外罩，不容易识别为特殊设备或跟踪设备。

The IsoLOG 3D is sensitive to the maiority of incoming signal polarizations, including all linear polarizations. This allows for highly reliable signal detection- even those invisible to most DF systems that consist of vertically polarized antennas only.
IsoLOG 3D天线对输入信号极化很敏感，包括所有线性极化，可实现高度可靠的信号检测 -即使是那些仅由垂直极化天线组成的大多数DF系统都不可见的。

Control Software控制软件
The powerful software allows you to manually switch between each antenna and / or sector (i.e. manual RF tracking). The software also includés a programmable sector / antenna auto-rotate, and an ultra-fast ,chopper mode" for real-time and simultaneous isotropic measurements across all antennas/ sectors. Thanks to the freely adjustable switching speed, even slower receivers can be used with the IsoLOG 3D. Nevertheless, because of the high switching specpossible, we recommend the use of a real-time spec trum analyzer such as Aaronia's V5 series. The Remote Control Software included in the shipment is easy to use, and lets you control the tracking array via any Windows PC with Ethernet connector.
功能*的软件可在每个扇区/天线阵子之间手动切换，并可编程扇区/天线阵子自动旋，以及超快速切换模式，用于所有扇区/天线阵子的实时和同步各向同性测量。由于可自由调节切换速度，使得IsoLOG 3D天线也可以适用慢的接收器。由于其可高频切换特性，建议使用实时频谱仪分析仪，如Aaronia的V5系列。随货提供的远程控制软件易于使用，通过Windows PC以太网连接控制。

>Auto-rotate with adjustable speed and ultra-fast chopper mode" (i.e. "omnidirectional" measuring)
  速度可调，自动旋转，超快速切换模式（测量）
>Fast and easy antenna/sector selection for manual RF tracking
  快速、简易天线或扇区选择，进行手动模式跟踪
>Virtually real-time switching between all sectors (vertical, horizontal, all)
   所有扇区几乎实时转换（垂直、水平或全部）
>Pre-saved and adjustable profiles for specific measurement modes
   预存可调的配置文件适用于特定的测量模式

规格参数