RZ-8W automatic microcomputer calorimeter
RZ-8W型建材制品燃烧热值测试仪
1.功能特点
1、外型美观大方，选材考究，制作精良，结构合理，故障率低
1. Features
1 It is beautiful and elegant, well-made and well-structured with special material and low failure rate.
2、整个过程操作简单，只需将装有试样的氧弹充氧后放入量热仪内，试验自动完成。
2 It is quite easy in operation in the whole process and just by adding the oxygen bomb filled with oxygen and samples into the calorimeter, then the experiment can be automatically completed.
3、采用双筒结构往内桶中注水，有效的避免了注水后因水位过高溢出的现象。
3 Injecting water into the inner barrels by means of binoculars effectively avoids the overflow phenomenon due to high water level.
4、采用水位平衡盒平衡水位，重复误差＜0.5g，水量准确，实验时间短。
4 The water level balance box is used for water level equilibrium so that the repeated error can be smaller than 0.5g, the water volume is accurate and experimental time lasts shorter.
5、采用进口搅拌电机，使内桶水快速对流，搅拌充分。
5 Imported mixing motor is used so as to make sure of fast water convection of inner barrels and can meet a full mixing.
6、测试软件全面支持windows平台，稳定性好，操作方便易学易懂。
6 The test software extends great support for windows platform which is good at stability and easy operation and simple understanding.
开机界面
试验结果界面
2 .技术参数
测温范围：0~40℃（每次测定室温变化应≤1℃）相对湿度≤85%
温度分辨率：0.0001℃
测试时间：点火初期6分钟平衡水温。点火后12分钟测试主期温度，全程实验时间18---20分钟（煤样热量低实验时间相对延长）。
2. Technical parameters
Temperature range: 0 ~ 40 ℃ (every temperature change should be≤1 ℃)
Relative humidity ≤85%
Temperature resolution: 0.0001 ℃
Test time: it takes 6 minutes for temperature balance in early ignition. The main temperature will be measured after 12 minutes of ignition and the entire experiment lasts from 18 to 20 minutes (coal heat is low and the test time can be relatively extended).
功 率：<500W 电源：220V±10V
外观尺寸：400mm×575mm×456mm
测量精度：符合国标GB/T14402-2007
外桶容量：35L 内桶容量：2.3L 点火电压：24V
Power:<500W power supply: 220V ± 10V
Dimensions: 400mm × 575mm × 456mm
Accuracy: meeting the national standard GB / T14402-2007
Outer barrel capacity: 35L inner barrel capacity: 2.3L Ignition Voltage: 24V
摘自：北京鑫生卓锐科技有限公司技术服务部。
