P30H转换器

P30H is a transducer which was designed to photovoltaic , battery, telecommunication and railway installations. P30H measures and records current, voltage, power, energy and other d.c. circuit parameters.

P30H是一种转换器，设计为光伏、电池、电信和铁路装置。P30H测量和记录电流、电压、功率、能量和其他直流电路参数。

The output signal is galvanically isolated from the input signal and the power supply.
P30H has programmable measurement and additional functions.
Programming parameters can be realized with the use of buttons, via RS-485 interface and free e-con software or Ethernet or any web browsers (see how it works: login – user, password – pass).

输出信号从输入信号和电源中进行电流隔离。

P30H具有可编程测量和附加功能。

编程参数可以通过使用按钮来实现，通过RS-485接口和免费的e-con软件或以太网或任何web浏览器(参见它是如何工作的:登录用户、密码通过)。

产品资料：

p30h

p30h_usermanual

Features

·         basic,

·         with SD/SDHC card,

·         with Ethernet and internal file system memory.Transducer is available in 3 versions:

Features and functions:

·         Programmable input

·         DC parameters

·         current via shunts +/- 150mV

·         voltage 0…12/48/100/250V or 0…600/1000V with additional resistor

·          Output:

·         1 x analog 0/4…20mA or 0…10V

·         1 x relay, optionally changeable to 0/4…20mA or 0…10V analog output

·         1 x additional relay, optionally changeable to 0…24V d.c. supply output

·         LCD 2 x 8 characters with LED backlight

·         Supply: 85..253 V a.c./d.c. or 20…40 V a.c./d.c., / 20…60 V d.c.

·         Conversion of measured values into an output signal on the base of the individual linear characteristic

·         1 or 2 alarm relays with NO contact operating in 6 modes

·         Additional supplying output 24 V d.c 30 mA switched-on/switched-off (option).

·         Recording of input signals in internal file, on SD/SDHC card (option) or internal file system memory (option).

·         Interface RS-485 Modbus RTU.

·         RS-485 Master/Monitor mode – possibility to poll 1 device.

·         SD/SDHC support (option).

·         Interface Ethernet 10/100 BASE-T (option).

·         Protocol: Modbus TCP/IP, HTTP, FTP.

·         Services: www server, ft p server, client DHCP

·         Dimension: 45 x 120 x 100mm

特性

·         基础,

·         与SD / SDHC卡,

·         使用以太网和内部文件系统内存。换能器有三个版本:

·         特性和功能:

·         可编程输入

·         直流参数

·         电流通过分流+/- 150mV。

·         电压0…12/48/100/250V或0…600/1000V与额外的电阻

·         输出:

·         1 x模拟0/4…20 ma或0…10 v

·         1 x继电器,可选的0/4…20 ma或0…10 v模拟输出

·         1 x额外的继电器,可选的为0…24 v。供应输出

·         液晶显示器2 x 8字，LED背光。

·         提供:85 . .253 V交流/直流电。或20…40 V交流/直流电。/ 20…60 V。

·         在单个线性特性的基础上，将测量值转换为输出信号。

·         •1或2个报警继电器，6种模式无接触操作。

·         •附加供应输出24 V d。c 30 mA开关-on/切断(选项)。

·         •在内部文件中记录输入信号，SD/SDHC卡(选项)或内部文件系统内存(选项)。

·         •接口RS-485 Modbus RTU。

·         •rs -485主/监视器模式-可能的poll 1设备。

·         •支持sd / SDHC(选项)。

·         •接口以太网10/100 BASE-T(选项)。

·         •协议:Modbus TCP/IP, HTTP, FTP。

·         •服务:www服务器，ft p server，客户DHCP。

·         •尺寸:45 x 120 x 100mm。