SDU/EFB/MP: Signal Distributor Unit for E1 / T1 Telecom Signals
The SDU/EFB signal distributor unit is a signal diplexer that allows to connect up to 24 devices to one E1/T1 sync output. This is a very compact and cost effective way to increase the number of E1/T1 ports available for synchronizing telecom switches and multiplexer as well as other devices that require a 1.544 or 2.048 MBit/s reference.
Key Features
- 19 Inch Metal desktop case
- 100-240 V AC / DC
or 19-72 V DC Power Supply - 2.048Mbit/s E1-Mode unbalanced
2.048Mbit/s E1-Mode balanced
Characteristics
Available Output Signals | 2.048Mbit/s E1 (2.048 Mbit/s), 120 ohm, balanced, via RJ45 connectors 2.048Mbit/s E1 (2.048 Mbit/s), 75 ohm, balanced, via BNC female connectors |
19''-Abmessungen' | (W x H x D) 443 mm x 45 mm x 285 mm |
Power supply | 100-240 V DC / 100-240 V AC (50/60 Hz) or 19-72 V. DC |
Power consumption | 28W |
Form Factor | 19'' aluminium case (1U) Schroff Multipac |
Protection | IP20 |
Ambient temperature | 0 ... 50°C / 32 ... 122°F |
Humidity | Max. 85% |
Warranty | Three-Year Warranty |
RoHS-Status of the product | This product is fully RoHS compliant |
WEEE status of the product | This product is handled as a B2B category product. In order to secure a WEEE compliant waste disposal it has to be returned to the manufacturer. Any transportation expenses for returning this product (at its end of life) have to be incurred by the end user, whereas Meinberg will bear the costs for the waste disposal itself. |
Characteristics
Frequency range | Antenna: Receive frequency: 1575.42 MHz Converter: Local oscillator to converter frequency:: 10 MHz First IF frequency: 35,4 MHz |
Physical dimensions | Dimensions of the GPS Antenna - see datasheet. |
Antenna connector | type-N connector |
Bandwith | 9 MHz |
Power supply | 12V ... 18V, @ 100mA (provided via antenna cable) |
Form Factor | ABS plastic case for outdoor installation (IP66) |
Ambient temperature | -40 ... 65°C |
Warranty | Three-Year Warranty |
RoHS-Status of the product | This product is fully RoHS compliant |
WEEE status of the product | This product is handled as a B2B category product. In order to secure a WEEE compliant waste disposal it has to be returned to the manufacturer. Any transportation expenses for returning this product (at its end of life) have to be incurred by the end user, whereas Meinberg will bear the costs for the waste disposal itself. |