E1阻抗BNC转换rj48c匹配器 75-120欧姆CY460F,CY460MC
CY460F/MC系列是一种G.703平衡非平衡转换器,它解决了75Ω双铜轴到120Ω双绞线的信号转换问题。它支持E1数据率(2.048Mbps),接收75Ω信号并将它转换为120Ω,使用CY460用户只需使用普通120Ω双绞线就能完成75Ω铜轴双同轴间的信号通信。
性能特点:
★ 数据率2.048Mbps
★ 75Ω双同轴到120Ω双绞线
★ 双向信号转换
★ 不需交流电源或电池供电
★ 链路到数据隔离电压1000V DC/AC
★ 可提供阳头或阴头的同轴线BNC接头
★ CY460MC(公头)、CY460F(母头)
★ 可根据客户要求订做
深 圳 市 赛 科 通 电 子 技 术 有 限 公 司
淘宝网店:/ 淘宝店铺名:赛科通数码店
/ 淘宝店铺名:雷盾电器店
详情请登陆我公司网站:进行查询或致电
进行查询或致电
SAKERTELE CY460F/CY460MC
E1/ G.703 Coax to Twisted Pair Adapter (Balun)
CY460F CY460MC CY460F
1.0 GENERAL INFORMATION
Thank you for your purchase of this Sakertele Electronics product, CY460 Series allow 75Ωcoax hardware to communicate with 120Ω twisted pair equipment. The CY460 Series specifically address the ONP requirement that European PTTsoffer 120 Ohm twisted pair terminations to their customers. The sign also output by them are scaled to match the pulse shape requirements specified by the CCITT G.703/E1 standard.
CY460 is a Dual Coax to RJ45 Balun Adapter which realize 75 Ohm coax to 120 Ohm RJ45 impedance converter.
2.0 PRODUCT SPECIFICATIONS
1. Transmission regulation: ITU/CCITT G.703 /E1
2. Data Rate: 2.048 Mbps maximum Unbalanced Coaxial
3. Connection: Dual coax BNC connectors,CY460F/CY460MC
4. Coaxial Impedance : 75Ω
5. RJ-45C Impedance: 120Ω
6. Connection: Single 8-pin RJ-45C jack, shielded (two twisted-pair),
7. Operating Temperature: 0-50° Celcius (32-122° Fahrenheit)
8. Isolation: 2500V rms
9. Dimensions: 0.8H x 1.7W x 2.7D
10. Power Supply: None
3.0.Coaxial connectors and shielded RJ-45 Jake pin out
Digital Signal | RJ-45C Description | DTE RJ-45C | BNC Description | DTE BNC |
Rx A- | Receive Input Negative | 1 | Receive Input | Tip |
Rx B+ | Receive Input Positive | 2 | Receive Ground | Ring |
Tx A- | Transmit Output Negative | 4 | Transmit Output | Tip |
Tx B+ | Transmit Output Positive | 5 | Transmit Ground | Ring |
S1 | Transmit Ground | 3 | ||
S2 | Receive Ground | 6 |
4.0. Installing the CY460F/CY460MC
1) Refer to the pin configuration below when assembling the cable that will connect to the RJ-45 jack.
RJ-45 Pin(s) Function
1 and 2.............................TX pair
3.......................................TX shield
4 and 5............................RX pair
6......................................RX shield
2) Plug the modular cable connector into the RJ-45 jack.
3) Connect the coaxial cables to the TX Out and RX In connectors.
THE CY460 has Two serial product (Male and female),CY460F or CY460MC . This product has been thoroughly inspected and tested and is warranted for One Year parts and labor. If any questions or problems arise during installation or use of this product, please do not hesitate to contact Shenzhen sakertele electronics technology co.,ltd Technical Supporte.
Shenzhen Leidun Electric Appliance Co., Ltd
phone: fax:
:+86
ADRESS: 6017# shennan road futian shenzhen ,china