300KW中频感应加热设备
节能型SD W-300KW中频感应加热设备可用于：
1.直径80mm以下的圆钢，方钢，棒等工件的加热锻造；
2.齿轮直径约750mm的淬火；
3，链轮淬火直径900mm，单齿淬火模量约50mm，轴淬火直径约300，淬火均匀，效果好。
设备优势：
1，IGB逆变技术及串联谐振电路；
2，频率范围宽，从1KHz-8KHz，可以根据特定加热工件的加热深度进行匹配，适应范围大；
3，采用智能变频器控制技术，全软下一页：
主要特征：
1，IGB逆变技术及串联谐振电路；
2，频率范围宽，从1KHz-8KHz，可以根据特定加热工件的加热深度进行匹配，适应范围大；
3，采用智能变频器控制技术，全软开关精密控制，设备运行可靠性高，维护率低；
4，高效节能，比晶闸管中频节能10％-30％，全功率范围内功率因数高，功率效率高；
5，100％满负荷，24小时连续工作的能力;
6.全面显示频率，功率，电压和电流；
7.操作简单，安装简单，连接三相380V和冷却水。
300KW medium frequency induction heating equipment
Energy-savingSDW-300KWmedium frequency induction heating equipment is mainly for:
1.Heatingforgingof round steel, square steel, bar and other workpieces with adiameter of80mmor less;
2.Quenching of gearswith a diameter ofabout750mm;
3,900mmdiametersprocket quenching, single tooth quenchable modulus ofabout50mm, diameter ofabout300shaftquenching, quenching uniform, good effect.
Equipment advantages:
1,IGBinverter technology and series resonant circuit;
2, the frequency range is wide, from1KHz-8KHz, canbe matchedaccording to theheatingdepth of thespecific heating workpiece, the adaptation range is large;
3, using intelligent inverter control technology, all soft Next:
main feature:
1,IGBinverter technology and series resonant circuit;
2, the frequency range is wide, from1KHz-8KHz, canbe matchedaccording to theheatingdepth of thespecific heating workpiece, the adaptation range is large;
3.Adopt intelligent inverter control technology, full soft switch precision control, high reliability of equipment operation and low maintenance rate;
4, high efficiency and energy saving,10%-30%energy saving than thyristor medium frequency, high power factor and power efficiency in full power range;
5,99%full load,24hours continuous working capacity;
6.Full display of frequency, power, voltage and current;
7.Simple operation, simple installation, connect three-phase380Vａnd cooling water.
/plus/view.php?aid=158
哪个厂家的质量好?生产厂家西格马质量好，售后完善。
