ART-6200系列光时域反射仪
ART-6200系列光时域反射仪是全新一代7寸电容触摸产品，集成OTDR、光功率计、红光源等9大功能模块，外观靓丽新颖，外设丰富。采用优异的智能化硬件、软件设计，在短纤测试、自动测试方面准确性更高。同时配备丰富的以太网测试功能（Ping/PPOE/寻线等）可诊断以太网络的故障，支持手机APP无线控制，轻松获取测试结果。
ART-6200系列主要用于测量光纤光缆的长度、损耗和接续质量等参数，广泛用于光纤通信系统的工程施工、线路维护测试、紧急抢修以及光纤光缆的研制和生产测量等领域，主要应用在城市干线、骨干网和城域网等场合。
整机功能
OTDR、事件地图、光功率计、可视故障定位、稳定光源、端面检测（需另购探头）、光损耗测试、以太网测试、远程测试、文件管理
注：①动态范围测试环境温度25℃±2℃，测试脉宽，平均时间≥180s。
②事件盲区测试条件为最小量程、最小脉宽，光纤端面反射损耗≥45dB，典型值。
标配：
注：OTDR接口类型标配为FC/UPC，另FC/APC类型可选。
ART-6200系列主要用于测量光纤光缆的长度、损耗和接续质量等参数，广泛用于光纤通信系统的工程施工、线路维护测试、紧急抢修以及光纤光缆的研制和生产测量等领域，主要应用在城市干线、骨干网和城域网等场合。
整机功能
OTDR、事件地图、光功率计、可视故障定位、稳定光源、端面检测（需另购探头）、光损耗测试、以太网测试、远程测试、文件管理
| 型号 | 光时域反射仪 | ||||||||||||||||
| S0 | S1 | S2 | S3 | S4 | T1 | T2 | T3 | T4 | T5 | T6 | F1 | M1 | SM1 | SM2 | |||
| 光纤类型 | 单模 | 多模 | 单/多模 | ||||||||||||||
| 波长 | 1310/1550nm | 1310nm /1490nm /1550nm | 1310nm /1550nm /1625nm | 1310nm /1550nm /1650nm | 1310nm /1490nm /1550nm /1625nm | 850nm/ 1300nm | 850nm /1300nm /1310nm /1550nm | ||||||||||
| 动态 范围（dB） | 32/30 | 35/33 | 38/36 | 42/40 | 45/43 | 32/30/30 | 37/35/35 | 32/30/30 | 37/35/35 | 32/30/30 | 37/35/35 | 37/35/35/35 | 26/28 | 26/28 /35/33 | 26/28 /37/35 | ||
| 事件盲区 | 0.8m | 0.5m | 0.8m | 0.5m | 0.8m | 0.5m | 0.8m | 0.5m | 0.5m | 1m | |||||||
| 衰减盲区 | 4m | 3.5m | 4m | 3.5m | 4m | 3.5m | 4m | 3.5m | 3.5m | 6m | |||||||
| 测试量程 | 100m/500m/1.25km/2.5km/5km/10km/20km/40km/80km/125km/260km/420km | ||||||||||||||||
| 测试脉宽 | 3ns/5ns/10ns/20ns/30ns/50ns/80ns/100ns/200ns/300ns/500ns/800ns/1us/2us/3us/5us/8us/10us/20us | ||||||||||||||||
| 测距精度 | ±（0.75m+取样间隔+0.0025％×测试距离） | ||||||||||||||||
| 损耗分辨率 | 0.001dB | ||||||||||||||||
| 线性度 | ±0.03dB/dB | ||||||||||||||||
| 采样点数 | ≥256k | ||||||||||||||||
| 采样分辨率 | 0.015m~16m | ||||||||||||||||
| 反射准确度 | ±2dB | ||||||||||||||||
| 文件格式 | SOR标准文件格式 | ||||||||||||||||
| 损耗 测量模式 | 4点法/5点法 | ||||||||||||||||
| 激光 安全等级 | Class Ⅱ 级 | ||||||||||||||||
| 数据存储 | 内部存储：2GB（≥20000条）；外部存储：64GB | ||||||||||||||||
| 光连接器 | FC/UPC（可互换SC、ST） | ||||||||||||||||
| 实时 刷新速率 | 4Hz（典型值） | ||||||||||||||||
| 数据接口 | USB-A、Type-C、RJ45 LAN 10M/100M bit/s | ||||||||||||||||
| 光功率计 | |
| 波长范围 | 800nm~1700nm |
| 连接器 | 接头FC/SC/ST |
| 测量范围 | -50dBm～+26dBm/-70dBm~+6dBm |
| 不确定度 | ±5% |
| 校准波长 | 850nm/980nm/1300nm/1310nm/1490nm/1550nm/1625nm/1650nm |
| 光源 | |
| 激光类型 | FP-LD |
| 输出波长 | 与OTDR输出波长一致 |
| 输出功率 | ≥-5dBm（单模） |
| 工作模式 | CW/270Hz/1kHz/2kHz |
| 稳定度 | CW，±0.5dB/15min（开机预热15min后测试） |
| 光连接器 | FC/UPC（可互换SC、ST） |
| 可视故障定位 | |
| 工作波长 | 650nm±20nm |
| 输出功率 | ≥10mW |
| 工作模式 | CW/1Hz/2Hz |
| 光连接器 | FC/UPC（可互换SC、ST） |
| 光损耗测试指标参照上述光源、光功率计指标 | |
| 整机指标 | |
| 显示 | 7寸彩色电容触摸屏，分辨率800×480 |
| 供电方式 | Type-C电源适配器：输入100V~240V 50/60Hz，输出5V/3A 9V/2A 12V/1.5A 内置锂离子电池：3.7V，10400mAh， |
| 工作温度 | -10℃～+50℃ |
| 存储温度 | -40℃～+70℃ |
| 相对湿度 | 0～95％无结露 |
| 整机重量 | ≤1.2kg |
| 体积 | 215mm×160mm×50mm |
注：①动态范围测试环境温度25℃±2℃，测试脉宽，平均时间≥180s。
②事件盲区测试条件为最小量程、最小脉宽，光纤端面反射损耗≥45dB，典型值。
标配：
| 序号 | 名称 | 数量 | 备注 |
| 1 | 光时域反射计主机 | 1 | 含电池 |
| 2 | AC/DC电源适配器 | 1 | |
| 3 | U盘（含分析软件、使用说明书） | ||
| 4 | 数据线 | 1 | |
| 5 | OTDR SC转接口 | 1 | |
| 6 | 光功率计 SC转接口 | 1 | |
| 7 | 使用说明书 | 1 | |
| 8 | 校准证书 | 1 | |
| 9 | 合格证/售后服务保修卡 | 1 | |
| 10 | 清洁 | 10 | |
| 11 | 皮质把手 | 1 | |
| 12 | 仪器专用背包 | 1 |
ART-6200 series high-performance OTDR
Summary
ART-6200 series OTDR adopt 7 inch capacitance touch screen, which integrates 9 modules. With excellent intelligent hardware and software design, the accuracy of short fiber test and automatic test is higher. . It is equipped with rich Ethernet test (Ping/PPOE, etc), support APP control.
ART-6200 series is used to test the optical fiber length, loss and connection quality, and used in the engineering construction, link maintenance test, They are mainly used in urban trunk, bone trunk network and metropolitan area network.
Functions
OTDR/VFL/LS/OPM/Event Map/End Detection/Optical Loss Test/Ethernet test/Remote test/File management
Technical specifications
| Model | OTDR | ||||||||||||||
| S0 | S1 | S2 | S3 | S4 | T1 | T2 | T3 | T4 | T5 | T6 | F1 | M1 | SM1 | SM2 | |
| Type | SM | MM | SM/MM | ||||||||||||
| Wavelength | 1310nm /1550nm | 1310nm /1490nm /1550nm | 1310nm /1550nm /1625nm | 1310nm /1550nm /1650nm | 1310nm /1490nm /1550nm /1625nm | 850nm/ 1300nm | 850nm /1300nm /1310nm /1550nm | ||||||||
| Max Dynamic Range（dB） | 32/30 | 35/33 | 38/36 | 42/40 | 45/43 | 32 /30 /30 | 37 /35 /35 | 32 /30 /30 | 37 /35 /35 | 32 /30 /30 | 37 /35 /35 | 37 /35 /35 /35 | 26/28 | 26 /28 /35 /33 | 26 /28 /37 /35 |
| Event Blind Zone | 0.8m | 0.5m | 0.8m | 0.5m | 0.8m | 0.5m | 0.8m | 0.5m | 0.5m | 1m | |||||
| ATT Blind zone | 4m | 3.5m | 4m | 3.5m | 4m | 3.5m | 4m | 3.5m | 3.5m | 6m | |||||
| Test Range | 100m/500m/1.25km/2.5km/5km/10km/20km/40km/80km/125km/260km/420km | ||||||||||||||
| Pulse Width | 3ns/5ns/10ns/30ns/50ns/80ns/100ns/200ns/300ns/500ns/800ns/1us/2us/3us/5us/8us/10us/20us | ||||||||||||||
| Range Accuracy | ±（0.75m+ Sample interval +0.0025％×Test distance） | ||||||||||||||
| Loss Accuracy | ±0.03dB/dB | ||||||||||||||
| Sample Points | ≥256k | ||||||||||||||
| Sample Resolution | 0.015m~16m | ||||||||||||||
| Reflection Accuracy | ±2dB | ||||||||||||||
| Loss Resolution | 0.001dB | ||||||||||||||
| Loss Threshold | 0.01dB | ||||||||||||||
| File Format | SOR Standard File Format | ||||||||||||||
| Loss Analysis Mode | 4-point method /5-point method | ||||||||||||||
| Laser Safety Level | Class Ⅱ | ||||||||||||||
| Refresh Rate | 4Hz (Typ.) | ||||||||||||||
| Data Storage | Internal storage：2GB（20,000 curves）；External storage：64GB | ||||||||||||||
| Connector | FC/UPC（Interchangeable SC、ST） | ||||||||||||||
| Data Interface | USB-A、Type-C port、RJ45 LAN 10M/100M bit/s | ||||||||||||||
| OPM | |||||||||||||||
| Wavelength range | 800nm~1700nm | ||||||||||||||
| Connector | Universal FC/SC/ST | ||||||||||||||
| Test scope | -50dBm～+26dBm/-70dBm～+6dBm | ||||||||||||||
| Uncertainty | ±5% | ||||||||||||||
| Calibration wave | 850nm/980nm/1300nm/1310nm/1490nm/1550nm/1625nm/1650nm | ||||||||||||||
| LS | |||||||||||||||
| Wavelength | Consistent with OTDR output wavelength | ||||||||||||||
| Laser Type | FP-LD | ||||||||||||||
| Output power | ≥-5dBm | ||||||||||||||
| Stability | CW，±0.5dB/15min（Test after 15 minutes of boot-up preheating） | ||||||||||||||
| Mode | CW/270/330/1kHz/2kHz | ||||||||||||||
| Connector | FC/UPC（Interchangeable SC、ST） | ||||||||||||||
| VFL | |||||||||||||||
| Wavelength | 650nm±20nm | ||||||||||||||
| Output power | ≥10mW | ||||||||||||||
| Mode | CW/1Hz/2Hz | ||||||||||||||
| Connector | FC/UPC（Interchangeable SC、ST） | ||||||||||||||
| The Optical Loss Test index refers to the above light source and optical power meter index. | |||||||||||||||
| Others | |||||||||||||||
| Display | 7 inch color LCD + touch screen, resolution 800×480 | ||||||||||||||
| Power supply | AC/DC adapter：Input：100V～240V，50/60Hz；Output：5V/3A, 9V/2A, 12V/1.5A；Lithium battery：3.7V，10400mAh | ||||||||||||||
| Work temperature | -10℃～+50℃ | ||||||||||||||
| Storage temperature | -40℃～+70℃ | ||||||||||||||
| Relative humidity | 0～95％，Non Condensing | ||||||||||||||
| Weight | ≤1.2kg | ||||||||||||||
| Size | 215mm×160mm×50mm | ||||||||||||||
②Test conditions of event blind zone are min range, min pulse, reflection loss of optical fiber end surface (> 45dB), typical value.
Configuration List
| NO. | Name | Quantity | Remarks |
| 1 | Host | 1 | Including battery |
| 2 | AC/DC adapter | 1 | |
| 3 | U-disk (including analysis software, instructions) | 1 | |
| 4 | Data line | 1 | |
| 5 | OTDR SC adapter | 1 | |
| 6 | OPM SC adapter | 1 | |
| 7 | User's Manual | 1 | |
| 8 | Calibration Certificate | 1 | |
| 9 | Qualification Certificate/After-sales Service Guarantee Card | 1 | |
| 10 | Clean cotton slices | 10 | |
| 11 | Leather knob | 1 | |
| 12 | Instrument backpack (with straps) | 1 |
