[艾尔电气电缆识别仪 产品简介] |
电缆识别仪是一种专用电缆识别仪器。是目前国内电缆识别仪器中技术*、性能*的新型D电缆识别仪器。电缆识别仪由信号发生器和接收钳信号检测器及指示表三部分组成,信号发生器主要产生特殊的脉冲调制信号,通过输出线加至停止运行的被测电缆上,用接收钳在现场寻找被测电缆,当接收钳检测器测到施加在电缆上特殊信号时,信号检测器上电表指针与施加信号频率同步摆动,而其它电缆线上检测到的信号则要小很多且方向相反,通过电表指示幅度及方向,很容易判定被测电缆。
|
|
|
[艾尔电气电缆识别仪 产品特征] |
1、信号发生器和接收钳信号检测器及指示表三部分组成; 2、电缆识别仪具有判别电缆准确、快速、操作简单; 3、应用范围广,适用于各种型号电缆中的停运电判别;
|
|
[艾尔电气电缆识别仪 产品参数] |
1、电 源:AC220V 50HZ; 2、输出功率:1KVA; 3、脉冲序列:1-2秒间隙调制; 4、重 量:4.5Kg; 5、尺 寸:260×180×110mm; 6、识别接收器:DSY-2000; 7、灵 敏 度:6级。
|
|
|
根据用户具体要求,设计相应的产品配置方案。 |
|
AL423 Cable identification device
Product characteristics:
1, signal generator and receiving the signal detector and clamp instruction sheet consists of three parts.
2, cable identification device with a cable identification is accurate, fast, easy to operate.
3, and wide application for various types of electrical cable outage in the identification.
Product parameters:
1, Power: AC220V 50HZ.
2, output power: 1KVA.
3, the pulse sequence: 1-2 seconds gap modulation.
4, sensitivity: 6.
5, Size: 260 × 180 × 110mm.
6, identify the receiver: DSY-2000.
7, Weight: 4.5Kg.