ZP-NET系列网络信号浪涌保护器主要用于采用RJ45接口传输速率在10/100/1000Mbps SWITCH、HUB、ROUTER、POE等网络设备的雷击和电磁脉冲造成的感应过电压保护。例如：机房网络交换机防护、机房服务器防护、机房其它带网络接口设备防护。
ZP-NET series network signal surge protective device is mainly used for using RJ45 interface transfer rate in 10/100/1000Mbps switch, hub, router, Poe and other network equipment of lightning and electromagnetic pulse caused by the induced over voltage protection. For example: the computer room network switch protection, computer room server, the engine room other belt network interface equipment protection.
技术参数：Technical Data
型号/Model | ZP-NET/CAT5E1 | ZP-NET/CAT5E8 | ZP-NET/CAT5E16 | ZP-NET/CAT5E24 |
端口数/ Port number | 1 | 8 | 16 | 24 |
标称工作电压/Nominal operating voltage：Un | 5V | 5V | 5V | 5V |
标称放电电流/ Nominal discharge current: In (C2) | 2.5kA | 2.5kA | 2.5kA | 2.5kA |
zui大放电电流/ Max. discharge current: Imax (C2) | 10kA | 10kA | 10kA | 10kA |
电压保护水平/ Voltage protection level:（C2）Up | L-L：≤15V L-PE：≤600V | L-L：≤15V L-PE：≤600V | L-L：≤15V L-PE：≤600V | L-L：≤15V L-PE：≤600V |
响应时间/Response time:ta | ≤1nS | ≤1nS | ≤1nS | ≤1nS |
信号传输速率/ Signal transmission rate：Vs | 100Mbps | 100Mbps | 100Mbps | 100Mbps |
插入损耗/Insertion loss:Ae | ≤0.5dB | ≤0.5dB | ≤0.5dB | ≤0.5dB |
保护引脚/ Protection pin | Pin 1/2,3/6 | Pin 1/2,3/6 | Pin 1/2,3/6 | Pin 1/2,3/6 |
接头形式/Interface form | RJ45 | RJ45 | RJ45 | RJ45 |
安装支架/ Mounting bracket | 35mmDIN | 19 inch rack | 19 inch rack | 19 inch rack |
外形尺寸/Dimensions | 90x18x61mm | 180×85×45mm | 485×110×45mm | 485×110×45mm |
外壳材料/ Shell material | ABS阻燃防火材料、ABS flame retardant plastics，UL94-V0 | 铝合金外壳/Aluminium alloy shell | 铝合金外壳/Aluminium alloy shell | 铝合金外壳/Aluminium alloy shell |
外壳颜色/ Shell color | 乳白色/ Milky white | 灰色/Gray | 灰色/Gray | 灰色/Gray |
工作环境/ Working environment | 环境温度/ temperature：－40℃～＋85℃；相对湿度/ Relative humidity：≤95% | |||
外壳保护等级/ Shell protection grade | IP20 | |||
