移动端

通岸接头要求采用铜材制造

2011年08月15日 08:16东台市船舶装配有限公司点击量:920

通岸接头、DN65型通岸接头、DN50型通岸接头

:  传真:    :


 

通岸接头  International universal connector for shipping
 
           

 
  按照《1974年海上人命安全公约1981年修正案》的要求采用铜材制造,工作压力为0.1MPa。其一端为平面法兰,另一端为*附连的、与船上消火栓和消防水带配合的接口,接口规格可分为Dg50和Dg65,可在各类船舶上使用。
The international universal connector is made with cop-per material in accordance with the regulation of the IMO “international code for fire safety systems”its operation pressure is 0.1 Mpa,one side is a flange ,other side is ajoint that fitting with fire cock and fire hose of shipping,there are specifications to choose,the Dg50 and Dg65 for differ-ent shipping and boat.

版权与免责声明: 凡本网注明“来源:智慧城市网”的所有作品,均为浙江兴旺宝明通网络有限公司-智慧城市网合法拥有版权或有权使用的作品,未经本网授权不得转载、摘编或利用其它方式使用上述作品。已经本网授权使用作品的,应在授权范围内使用,并注明“来源:智慧城市网www.afzhan.com”。违反上述声明者,本网将追究其相关法律责任。

本网转载并注明自其它来源(非智慧城市网www.afzhan.com)的作品,目的在于传递更多信息,并不代表本网赞同其观点或和对其真实性负责,不承担此类作品侵权行为的直接责任及连带责任。其他媒体、网站或个人从本网转载时,必须保留本网注明的作品第一来源,并自负版权等法律责任。

编辑精选

更多

本站精选

更多

视频直击

更多

专题推荐

更多

名企推荐

更多

浙公网安备 33010602000006号