双层防爆高温老化试验箱
用途：主要用于电池安全性能检测中炉热试验、加热测试等。
Use: Mainly for battery safety testing in furnace heat test, heating test, etc.
特点：
Characteristics:
流线型外观设计
Streamlined design
箱门及控制面板均采用弧面流线型设计，整体美观大方，安全可靠，不会伤及工作人员
The door and the control panel is designed with Curved streamline.The overall appearance which is elegant, safe and reliable will not hurt the staff
底部脚轮方便移动
Bottom casters for easy movement
箱体底部安装4套万向轮，靠前面的两个脚轮带自锁功能，方便设备的移动和固定
The bottom of the chamber is equipped with 4 sets of universal wheels. There is self-locking function on the front two casters, which facilitate the movement and fixation of the equipment.
单机双箱设计
Single machine double box design
本设备采用单机双箱体设计，上下各一个测试箱体，两个箱体的控制系统及冷冻系统独立运行
This equipment adopts a single-seat double-casing design with one test case up and down, two control systems and freezing systems being operated independently
前门二次防爆设计
Front door secondary explosion-proof design
箱体的前面和后面泄压门均加装防爆链，当电池爆炸造成极大的冲击力将设备门冲开时，防爆链起到缓冲作用，防止门打开或者冲掉飞出，以防止造成二次伤害
The front and rear pressure relief doors of the chamber are equipped with anti-explosion chain. When the battery explosion causes a great impact force to open the equipment door, the explosion-proof chain acts as a buffer to prevent the door from opening completely or flushing out to prevent Cause secondary damage
加强型合页和防爆锁设计
Reinforced hinge and explosion lock design
防爆门与箱体之间连接的合页采用加强型304#不锈钢，同时，门锁采用强力平面锁，确保设备的安全。
The Explosion-proof door and the chamber connection are reinforced with 304# stainless steel while the door lock is adopted of a strong plane lock to ensure the safety of the equipment.
侧面防爆泄压设计
Side explosion pressure relief design
每个箱体侧面安装自动防爆泄压口，一旦感应压力自动泄压
Each side of the chamber is equipped with an automatic explosion relief vent, once the pressure is automatically relieved.In case inducing pressure ,it is automatically relieved.
性能参数：
型号 Model
BTT-D2-216A
BTT-D2-360A
单层内箱尺寸Single-layer inner box size
W600 X D600 X H600 MM
W1000 X D600 X H600 MM
外箱尺寸
External chamber size
W1340*D1085*H1765mm
结构方式结构方式Structural pattern
试验箱设计为整体式上下二个工作室结构
The test chamber is designed as a monolithic upper and lower box structure
温度范围 Temperature range
室温+10℃-+150℃
Room temperature +10℃-+150℃
温度波动度Temperature range
±0.3℃
升温时间Heating time
RT+10～+100℃ 10分钟左右 RT+10～+100°C for about 10 minutes
温度均匀度Temperature uniformity
≤±2℃ （空载、恒定状态时）
≤±2℃ （No load, constant state)
观察视窗
Observation window
W300 X H300 MM,防爆玻璃并贴有防爆膜
Explosion-proof glass with explosion-proof membrane
冷却方式
Cooling method
风冷
Air cooling
控制方式
Controlling method
触摸屏可程式控制PLC、带USB接口、带RJ485接口可连接电脑控制，专用的网络控制软件，方便远程监控，数据采集
Touch screen programmable control PLC, with USB interface, with RJ485 .interface can be connected to computer control, special network control software, convenient remote monitoring, data acquisition
内箱材质
Inner chamber material
SUS304#镜面不锈钢，1.0MM厚，喷铁氟龙绝缘
SUS304# mirror stainless steel, 1.0MM thick, sprayed with Teflon insulation
外箱材质External chamber material
镀锌板，喷粉，高温塑化，1.2MM厚
Galvanized sheet, dusting, high temperature plasticizing, 1.2 MM thick
电源电压Voltage
AC380V 50HZ 9KW
AC380V 50HZ
安全防护
Safety protection
自动防爆泄压装置，防爆链，三色灯报警装置，远程控制，排烟装置，灭火装置等Automatic explosion-proof pressure relief device, explosion-proof chain, tri-color light alarm device, remote control, smoke exhaust device, fire extinguishing device, etc.
引线孔
Leading hole
￠100mm左右各开一个，带软硅胶塞和不锈钢盖
¢100mm each opening one with soft silicone plug and stainless steel cover
拓展功能
Extension function
开发通讯协议与充放电机配套使用Development of communication protocol and supporting use of charge and discharge machine
