F-tone Networks Commercial-grade VGA extender over fiber is used to extend the transmission of VGA audio and video signals,which is usually used when the VGA cable limit length cannot meet the transmission distance.
This product transmits HDMI audio and video signal to 20KM user through the fiber, up to 120KM, equipment supports TCP/IP network protocol, can realize one transmitter to multiple receiver transmission through ethernet switches,long-distance transmission while support infrared return transmission, independent audio transmission, remote control of signal source (host-KVM, TV box-IR infrared) to ensure the stability of the signal while reducing the cost for the user.The equipment has a long transmission distance, low use cost, convenient installation, good compatibility, and is a stable and efficient transmission mode. Widely used in military exercise monitoring stations, security systems, prison/wharf/station/mine site monitoring,road monitoring,electronic monitoring system, highway video monitoring system, pass checkpoints and other projects.
Features
● VGA video support maximum resolution 1920*1080P@60Hz downward compatibility
● Support automatic phase detection (APD)
● Support automatic position calibration (APC)
● Support automatic gain calibration (AGC)
● Support independent analog of 3.5mm audio
● Support KVM function (keyboard and mouse)
● Support reverse IR infrared function
● Support point to point, point to many transmission through ethernet switches (up to 255 points)
● Support many to many signal transmission applications
● Support for single fiber / dual fiber (optional)
● Single mode/multi-mode compatibility, multi-mode transmission distance of 1KM, single-mode transmission distance of 20KM, can customize up to 120km
● Built-in ESD electrostatic protection circuit, simple to install, plug and play
● Support mutual communication with our HDMI / DVI series
● The equipment has a differentiated transmitter (signal source), a receiver (display end)
Technical Indexes
| Fiber index |
| Wavelength | 1310-1550nm |
| Tx power | ＞-8db |
| Rx sensitivity | ＞-26db |
| Fiber connector | FC default SC / LC / ST (Optional) |
| Video index |
| Video specifications | The RGB bands are synchronized with H and V alone |
| Maximum pixel clock | 148.5MHZ |
| Resolution | 480i/p, 576i/p 720p25/30/50/60 1080i50/60 1080p24/25/30/50/60 |
| Effective cable length | 10 Meters |
| Physical interface | HD-15, Female VGA |
| KVM(USB) index |
| Version | 1.1 |
| Tx physical interface | USB female type A |
| Rx physical interface | USB female type A |
| Audio index |
| Sampling frequency | 32k、44.1k、48k、64k、88.2k、96k、176.4k、192kHz |
| Sampling depth | 24bit |
| Dynamic bandwidth | 96db |
| Total harmonic distortion (THD) | -88db |
| Signal to noise ratio（SNR） | 96db |
| Audio input / output impedance | 600Ω |
| Signal level | VPP 3.3V |
| Physical interface | 3.5mm stereo audio socket |
| Signal type | Analog stereo channel |
| IR index |
| Infrared interface | Standard 3.5mm interface |
| Infrared frequency | Standard with 20-60KHz |
| Signal type | Digit signal |
| Infrared transmission direction | Reverse transmission |
| Other indexes |
| Working temperature | -20°C ~75°C |
| Storage temperature | -40°C ~85°C |
| Product size | 104*104*28mm |
| Product net weight (Pair) | 0.35/kg |
| Product weight (including outer packaging) | 0.6/kg |
| Product outer packaging dimensions | 275*220*55mm |
| Power supply | DC 5V |
| Power dissipation | 2.5W |
注：本产品有全国产化型号可选
Important Notice
Performance figures, data and any illustrative material provided in this data sheet are typical and must be specifically confirmed in writing by F-tone Networks before they become applicable to any particular order or contract. In accordance with the F-tone Networks policy of continuous improvement specifications may change without notice.
The publication of information in this data sheet does not imply freedom from patent or other protective rights of F-tone Networks or others. Further details are available from any F-tone Networks sales representative.
