橡胶制品滑动摩擦，磨损性能试验机

橡胶制品滑动摩擦，磨损性能试验机  功能：

    本厂生产的计算机控制塑料滑动摩擦试验机是在现有电子塑料滑动摩擦试验机的基础上又增加了很多试验功能，可以同时显示扭矩-时间曲线，随意设定试验次数，显示当前试验次数，设定时间及当前试验时间等多种功能，本机还配有彩色打印机，可以打印出带有曲线，表格数据，试验单位名头的精美的试验报告单。

Function:

The computer controlled plastic sliding friction test machine produced by our factory is on the basis of the existing electronic plastic sliding friction test machine, and has added a lot of test functions. It can display the torque time curve at the same time, set the test times at will, display the current test times, set the time and the current test time and other functions, this machine is this machine. It also has a color printer, which can print out exquisite test reports with curves, table data and test units.

橡胶制品滑动摩擦，磨损性能试验机  特点：

1、速度精度：1%

2、负荷精度：0.5%

3、摩擦力矩精度：1%

4、具有试验人员分级管理功能。

5、实时显示摩擦系数-时间，扭矩-时间曲线。

6、试验报告可打印试验参数，试验数据，曲线，备注等信息，简单，方便，可编辑。

7、试样尺寸： 30mm×7mm×6mm

8、转动速度： 0-500转/分 （可调）

9、负 荷： 196N ± 0.1%（可增至392N）

10、摩擦环尺寸：￠40×10mm ，倒角0.5×45°，外圆表面与内圆同心度偏差小于0.01

11、摩擦环材质：45号钢,淬火,热处理HRC40-45,外圆表面光洁度▼8

12、摩擦力矩： 0--4N·m

13、砝码重量：4KG砝码一件，1KG砝码4件，可实现重量叠加功能。

14、计数器精度：1S

15、传感器测量精度：1% FS

16、系统运行稳定，可靠性高。

17、结构紧凑，使用方便，简单。

18、采用高精度电机、驱动机、传感器，精度高。

19、主要配置及附件：（计算机控制）

1、试验主机一台

2、高精度扭矩传感器一只

3、计算机数据采集卡一块

4、计算机一台（品牌）

5、彩色激光喷墨打印机一台

6、计算机控制软件一套

7、4Kg 砝码两件（备用一套）

8、标准磨擦环四件（备用两件）

9、产品使用说明书一份

10、产品合格证

11、产品装箱单一份

12、整机重量：约87 公斤

Features:

1. Speed accuracy: 1%

2. Load accuracy: 0.5%

3. Friction torque accuracy: 1%

4. It has the function of graded management of experimental personnel.

5. Real time display of friction coefficient time and torque time curves.

6. The test report can print information such as test parameters, test data, curves, notes, etc. It is simple, convenient, and editable.

7. Sample size: 30mm x 7mm x 6mm

8. Rotation speed: 0-500 rpm (adjustable)

9. Load: 196N ± 0.1% (can be increased to 392N)

10. Friction ring size: ¥ 40 x 10mm, chamfered at 0.5 x 45 °, with a concentricity deviation of less than 0.01 between the outer and inner surfaces

11. Friction ring material: 45 steel, quenched, heat treated HRC40-45, outer surface smoothness ▼ 8

12. Friction torque: 0-4N · m

13. Weight: One 4KG weight and four 1KG weights can achieve weight stacking function.

14. Counter accuracy: 1S

15. Sensor measurement accuracy: 1% FS

16. The system runs stably and has high reliability.

17. Compact structure, convenient to use, and simple.

18. Adopting high-precision motors, driving machines, and sensors, with high precision.

19. Main configuration and accessories: (computer control)

1. One test host

2. One high-precision torque sensor

3. One computer data acquisition card

4. One computer (brand)

5. One color laser inkjet printer

6. A set of computer control software

7. Two 4Kg weights (one spare set)

8. Four standard friction rings (two spare)

9. One copy of the product user manual

10. Product Qualification Certificate

11. Product packing list copy

12. Overall weight: approximately 87 kilograms

精度Precision:

1、速度精度：1%

2、负荷精度：0.5%

3、摩擦力矩精度：1%

4、计数器精度：1S

5、传感器测量精度：1% FS

Precision:

1. Speed precision: 1%

2. Load precision: 0.5%

3. The precision of friction moment: 1%

4. Counter precision: 1S

5. Sensor measurement accuracy: 1% FS

技术参数：  M-200

1、试样尺寸： 30mm×7mm×6mm；

2、转动速度： ≤200 转/分（可调）；

3、负荷： (20KG)196N ± 0.1%,可增至(40KG)392N；

4、摩擦环尺寸：≥￠40×10mm ，倒角≥0.5×45°，外圆表面与内圆同心度偏差≤0.01；

5、摩擦环材质：45 号钢；

6、摩擦力矩： 0—4N.m；

7、砝码重量：4KG 砝码十件，1KG 砝码十件，可实现重量叠加功能；

8、精度：速度精度≤1%；负荷精度≤0.5%；摩擦力矩精度≤1%；计数器精度≤1S；传感器测量精度≤1%F。

9、配件：

试验主机一台；

高精度扭矩传感器一只；

计算机数据采集卡一块；

计算机控制系统一套；

标准摩擦环二件；

使用说明书一份；

产品合格证一份；

产品装箱单一份。

Technical parameters: M-200

1, sample size: 30mm x 7mm x 6mm;

2, rotation speed: less than 200 turn / points (adjustable);

3, load: (20KG) 196N + 0.1%, which can be increased to (40KG) 392N;

4, the size of the friction ring is greater than or equal to 40 x 10mm, the chamfering is equal to 0.5 x 45 degrees, and the concentricity deviation between the outer surface and the inner circle is less than 0.01.

5, friction ring material: No. 45 steel;

6, friction torque: 0 - 4N.m;

7, weight weight: 4KG weight ten, 1KG weight ten, can achieve weight superposition function.

8, accuracy: speed accuracy is less than 1%; load accuracy is less than 0.5%; friction torque accuracy is less than 1%; counter accuracy is less than 1S; sensor measurement accuracy is less than 1%F.

9, parts:

Test host one;

High precision torque sensor one;

A piece of computer data acquisition card;

A set of computer control systems;

Two standard friction rings;

One copy of the instructions;

A copy of the product certificate;

A single copy of the packing of the products.

符合标准：

GB/T 3960-1983 塑料滑动摩擦磨损试验方法 GB/T 9141.8-1999 柔性石墨板材滑动摩擦系数测试方法

Conform to the standard:

GB/T 3960-1983 plastic sliding friction and wear test method GB/T 9141.8-1999 flexible graphite sheet friction coefficient test method

试验步骤

1、圆环应清除油污，贮存于干燥缸内以防生锈。

2、试样经状态调节后用感量为0.1毫克的分析天平称取其质量（M1）。

3、把试样装进夹具，摩擦面用角尺校正并使它与圆环的交线外于试样正中。装好摩擦力矩记录纸，开机校好零点。

4、再次用乙醇、丙酮等不与塑料起作用的溶剂仔细清除试样和圆环上的油污，此后不准再用手接触试样和圆环的表面。

5、平稳地加荷至选定的负荷值。

6、对磨2小时后停机卸负荷，取下试样和圆环，清理试样表面后，用精度不低于0.02毫米的量具测量磨痕宽度，或在试验环境下存放1小时后称取试样质量（m2)。

7、读取摩擦力矩值。

Test steps

1. The circular ring should be cleaned of oil stains and stored in a drying cylinder to prevent rusting.

2. After adjusting the state of the sample, weigh its mass (M1) using an analytical balance with a sensitivity of 0.1 milligrams.

3. Insert the sample into the fixture, calibrate the friction surface with an angle ruler, and ensure that its intersection with the circular ring is outside the center of the sample. Install the friction torque recording paper and turn on the machine to calibrate the zero point.

4. Carefully remove the oil stains on the sample and ring using solvents such as ethanol and acetone that do not interact with the plastic. Afterwards, do not touch the surface of the sample and ring with your hands.

5. Load steadily to the selected load value.

6. After grinding for 2 hours, stop the machine to unload the load, remove the sample and ring, clean the surface of the sample, measure the width of the grinding mark with a measuring tool with an accuracy of no less than 0.02 millimeters, or weigh the sample mass (m2) after storing in the test environment for 1 hour.

7. Read the friction torque value.

设备维修服务：

我公司产品自用户现场调试验收合格后 1 年内免费保修，终身维护。在1 年免费保修期内产品发生非人为质量问题，我公司为客户提供免费维修。如产品在免费保修期外出现故障，维修服务只适当收取材料成本费。

售后管理：我公司实现计算机化管理，实行客户定期电话回访制度，定期复查设备的工作情况，定期电话指导用户对设备进行保养和检测，以便设备正常运转，跟踪客户的设备使用情况，以便及时对设备进行维护