通信电缆 网络设备 无线通信 云计算|大数据 显示设备 存储设备 网络辅助设备 信号传输处理 多媒体设备 广播系统 智慧城市管理系统
东莞市鑫正机械有限公司
东莞市鑫正机械有限公司
设备由进瓶输送线，模具输送线，放模具装置，压提环装置，取模具装置，模具，定位装置，架体，控制系统等组成。设备动作分为放提环、放模具、压提环、取模具四个基本动作完成。首先由人工将提环放在模具上，然后由模具输送线输送至放模工位，放模装置将三个模具放在另个瓶子上，再由进瓶输送线将瓶子输送至压提环工位。压完提环后由取模装置将模具取放至模具输送线上，由模具输送线将模具输送至放提环工位循环使用。放模、压提环、取模工位瓶子均有定位装置将瓶子定位。
设备由进瓶输送线，模具输送线，放模具装置，压提环装置，取模具装置，模具，定位装置，架体，控制系统等组成。
功率：约1000W
The equipment is composed of bottle feeding conveying line, mold conveying line, mold releasing device, pressure lifting ring device, mold taking device, mold, positioning device, frame, control system, etc.
The equipment action is divided into four basic actions: releasing the lifting ring, releasing the mold, pressing the lifting ring and taking the mold. Firstly, the lifting bail is put on the mold manually, and then transported to the mold releasing station by the mold conveying line. The mold releasing device puts three molds on another bottle, and then the bottle is transported to the pressure lifting bail station by the bottle feeding conveying line.
After pressing the bail, the mold is taken and placed on the mold conveying line by the mold taking device, and the mold is transported to the bail placing station by the mold conveying line for recycling. There are positioning devices for the bottles in the mold release, pressure lifting ring and mold taking stations to position the bottles.
technical parameter
Production speed: up to 1200pcs / h
Applicable product: 6L soy sauce bottle
Air source: compressed air pressure above 0.6MPa
Power supply: AC220V, 50Hz
Power: About 1000W
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
智慧城市网 设计制作，未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
