INT30H风向传感器INT系列风速风向计产品简介INT系列风速风向计是德国kriwan工业公司设计开发研制的，用来测量和监控风力和风向的仪器例如用在监控起重机的安装,风力发电场,测风塔,滑雪,空中索道,建筑系统,盲人保护,气象站和科学研究等
INT 30H 风向传感器
INT系列风速风向计产品简介
INT系列风速风向计是德国kriwan工业公司设计开发研制的，用来测量和监控风力和风向的仪器 例如用在监控起重机的安装,风力发电场,测风塔,滑雪,空中索道,建筑系统,盲人保护,气象站和科学研究等。该系列产品属金属设计(铝)),小巧美观,宽温度范围(-40...70℃),真实的偏差指示,没有“线性错误",在抗冲击和振动上标准高(宽带噪声), 99%无需维护,旋转叶片在高风速时不变形,防沙尘防海水腐蚀,低启动风速(<0.4 m/s),抗高频电磁干扰( ENV 50140 Teil 3, E=100V/m, 30...1000MHz),适合高端环境应用.该系列产品已经通过了ISO9001/2000管理体系认证,UL,CSA,CE国际认证,具有IP54的保护等级认证.
功能描述
KRIWAN风向传感器用来测量144个风向。一个用来防止结冰的自调节PTC一加热装置和电阻器彼此连接在传感器的端口和外罩之间用来防止静电放电、信号通过光电方式产生。 一个内置的电路回路把光信号进行解码变成一个与极性无关的两路信号。
测量范围 | 0-360° |
精确度 | ± 2.5° |
开始风速 | <0,4m/s |
信号输出 | DC 4...20mA, limited to 20,5mA / DC 0-10V |
连接 | DC 24V ±25%, 防反向连接 |
连接方式 | 5-pole plug (M12) |
定点连接导线 | 4 x 0,75mm2 |
加热 | 自控加热，连接AC/DC 30V ±20% . 20VA |
安装 | pipe type mast Ø48 mm, Ø inside at least 37mm |
尺寸 | 60x105mm, length of wind arrov 358mm |
桅杆安装 | 2 VA-wing screw M8x16mm |
重量 | 500g |
INT series wind speed and direction meter product introduction
Int series of anemorumbometer are Germany KRIWAN industrial design and development company development, used for measurement and monitoring of the wind and the wind instruments such as used in the installation of crane monitoring, wind farm, wind tower, skiing, cableway, building systems, blind protection, meteorological stations and scientific research. This series of products is metal (aluminum) design, compact appearance, wide temperature range of - 40--70℃, the deviations of the real instructions, no linear error ", in shock and vibration on high standard (broadbａnd noise), 99% free maintenance, the blades rotate at high speed deformation, anti dust and anti seawater corrosion Corrosion, low starting wind speed (<0.4 M / s), anti high frequency electromagnetic interference (Env 50140 Teil 3, E=100V/m, 30... 1000MHz), suitable for high-end application environment. This series of products have passed the ISO9001 / 2000 management system certification, UL, CSA, CE international certification, with IP54 protection grade certification.
Function description
KRIWAN wind direction sensor 144 wind measurements. A to prevent icing self regulating PTC heating device, and a resistor connected to each other in between the sensor port and the outer cover to prevent electrostatic discharge, the signal produced by photoelectric method. A built-in circuit for the optical signal to signal is decoded into a and independent of the polarity of the two signals.
Measuring range | 0...360° |
Accuracy | ±2.5° |
Resolving power | <0,1m/s |
Starting wind speed | <0,4m/s |
Signal output | DC 4...20mA, limited to 20,5mA / DC 0-10V |
Connect | DC 24V +50/-25%, reverse connection |
Connection mode | 5 Pin- plug (M12 |
Fixed connection conductor | 4 x 0,75mm2 |
Heating | Self controlled heating, power supply 30V AC/DC + 20% max. 20VA |
Install | Ø48 mm ointernal tubular mast mast minimumØ 37mm |
Size | 60x115mm rotating Ø212mm vane vane |
Mast installation | 2 VA- airfoil screw M8x16mm |
Weight | 400g (600g) when there is a cable connection |
Protection level | IP54 according to EN60529 |
