通信电缆 网络设备 无线通信 云计算|大数据 显示设备 存储设备 网络辅助设备 信号传输处理 多媒体设备 广播系统 智慧城市管理系统 其它智慧基建产品
深圳市锦辰科技有限公司
深圳市锦辰科技有限公司
HighPowerOutdoorWirelessCoveragePLANEThaslaunchedthelatesthighpoweroutdoorwirelessLANsolution�theWNAP-6305outdoorwirelessAP
| High Power Outdoor Wireless Coverage PLANET has launched the latest high power outdoor wireless LAN solution � the WNAP-6305 outdoor wireless AP. It provides higher transmit power, better performance, and wider coverage. The WNAP-6305 is compatible with IEEE 802.11b/g/n standard and the data rate support is up to 150Mbps in 802.11n mode. The WNAP-6305 not only has a built-in 12dBi panel antenna but also reserves one SMA-type antenna connector to allow versatile antenna installations and multiple adjustable transmit output power controller. Therefore, the WNAP-6305 is quite suitable for widely open space applications. |
 |
| Multiple Operating and Wireless Modes The WNAP-6305 supports multiple wireless communication connectivities (AP / Client CPE / WDS PtP / WDS PtMP / Repeater / Universal Repeater), allowing for various application requirements that gives user more comprehensive experience when using the WNAP-6305. It also helps user to easily build wireless network and extend the wireless range of the existing wireless network. The WNAP-6305 also supports WISP mode, so CPE users could easily connect to Internet via WISP provider or connect to a wired network. |
 |
| Advanced Security and Management In aspect of security, besides 64/128-bit WEP encryption, the WNAP-6305 integrates WPA / WPA2, WPA-PSK / WPA2-PSK and 802.1x authority to secure and protect your wireless LAN. The wireless MAC filtering and SSID broadcast control consolidate the wireless network security and prevent unauthorized wireless connection. Highly Reliable Outdoor Device The WNAP-6305 is perfectly suitable to be installed in outdoor environments and exposed locations. With its IP55 casing protection, the WNAP-6305 can perform normally under rigorous weather conditions including heavy rain and wind. With the proprietary Power over Ethernet (PoE) design, the WNAP-6305 can be easily applied in the areas where power outlets are not available. It is the best way to use the WNAP-6305 to build outdoor wireless access applications between buildings on campuses, business communities, rural areas and more. |
 |
| Easy Installation and Management With user-friendly Web UI and step by step Setup Wizard, the WNAP-6035 is easy to install, even though to a user who never experiences in setting up a wireless network. |
| Longer distance coverage between LAN connections The WNAP-6305 is a cost-effective outdoor wireless solution for widely open space applications. It is best suitable for outdoor wireless connections between buildings. |
 |
| With a built-in SMA-type antenna connector and high output power with multiple adjustable Tx controller, the WNAP-6305 provides higher coverage and longer distance wireless connection, and also allows CPE users to easily install and adjust the suitable value in appropriate locations. The WISP mode supported enables CPE users to connect to Internet via local WISP provider. |
 |
| **Sincerely suggest you match the same model in outdoor wireless bridge application for getting the best performance. |
| Industrial Compliant Wireless LAN & LAN ??� Compliant with IEEE 802.11n wireless technology capable of up to 150Mbps data rate ??� Backward compatible with 802.11b/g standard ??� Equipped with 10/100Mbps RJ-45 Ports for LAN & WAN, Auto MDI/ MDI-X supported Fixed-network Broadbａnd Router ??� Supported connection types: Dynamic IP/ Static IP / PPPoE / PPTP / L2TP ??� Supports multiple sessions IPSec, L2TP and PPTP VPN passthrough ??� Supports Virtual Server, DMZ and Port Forwarding for various networking applications ??� Supports DHCP Server, UPnP, and Dynamic DNS RF Interface Characteristics ??� Built-in 12dBi Directional Antenna ??� High Output Power Up to 600mW with multiple adjustable transmit power control ??� Reserve RP-SMA Type Connector Outdoor Environmental Characteristics ??� IP55 Enclosure ??� Passive Power Over Ethernet Design ??� Reset Button on PoE Injector ??� Operating Temperature: -20~70 degrees C Multiple Operation and Wireless Mode ??� Multiple Operation Modes: Bridge, Gateway, Ethernet Converter ??� Multiple Wireless Modes: AP, Client CPE(WISP), WDS PtP, WDS PtMP, Repeater, Universal ???Repeater Secure Network Connection ??� Supports Software Wi-Fi Protected Setup (WPS) ??� Advanced security: 64/128-bit WEP, WPA/WPA2, WPA-PSK/WPA2-PSK(TKIP/AES), and 802.1x ???Authentication ??� Supports NAT firewall features, with SPI function to protect against DoS attacks ??� Supports IP / Protocol-based access control and MAC Filtering Easy Installation and Management ??� Web-based UI and Quick Setup Wizard for easy configuration ??� Remote management allows configuration from a remote site ??� System status monitoring includes DHCP Client and System Log |
| 硬件特性 | |
| Standard Support | IEEE802.11b/g IEEE 802.11n IEEE 802.3 10Base-T IEEE 802.3u 100Base-TX IEEE 802.3x Flow Control |
| 芯片 | Ralink RT3050 |
| Memory | 16 Mbytes DDR SDRAM 4 Mbytes Flash |
| 端口 | Wireless IEEE 802.11b/g/n LAN: 1 x 10/100Base-TX, Auto-MDI/MDIX WAN: 1 x 10/100Base-TX, Auto-MDI/MDIX |
| 天线 | Internal (Default): 12dBi directional antenna (Vertical-Polarization) ??? Horizontal: 60 degree ??? Vertical: 30 degree External (Option): RP-SMA type Connector ??? Switchable by Software ??? For External Antenna Mode, attach antenna before power on |
| Enclosure | IP55 waterproof case |
| PoE | Passive PoE / 12V DC (Up to 40 meters) Reset Button on PoE Injector LAN RJ-45 Pin Assignment: PIN 4,5(+), PIN 7,8(-) |
| 尺寸 | 225 x 77 x 60 mm |
| 重量 | 255g |
| 无线端口特性 | |
| 频段 | 2.4~2.4835GHz |
| 调制 | Transmission/Emission Type: DSSS / OFDM Data modulation type: OFDM with BPSK, QPSK, 16-QAM, 64-QAM, DBPSK, QPSK, CCK |
| 数据传输速率 | 802.11b: 11, 5.5, 2 and 1 Mbps with auto-rate fall back 802.11g: 54, 48, 36, 24, 18, 12, 9 and 6Mbps 802.11n (20MHz): up to 72Mbps 802.11n (40MHz): up to 150Mbps |
| 选项.信道 | America/ FCC: 2.414~2.462GHz (11 Channels) Europe/ ETSI: 2.412~2.472GHz (13 Channels) Japan/ TELEC: 2.412~2.484GHz (14 Channels) |
| RF Output Power | 802.11b: 27 � 1dBm 802.11g: 26 � 1dBm 802.11n: 22 � 1dBm |
| 接收器灵敏度 | 802.11b: -93dBm 802.11g: -91dBm 802.11n: -89dBm |
| Media Access Control | CSMA/CA |
| Output Power Control | Range 1~100, default:100 |
| Power Requirements | 12V DC, 1A (switching) |
| 无线管理特性 | |
| 无线模式 | ??? AP ??? Client ??? WDS PtP ??? WDS PtMP ??? WDS Repeater (AP+WDS) ??? Universal Repeater (AP+Client) |
| 信道频宽 | 20MHz / 40MHz |
| 加密安全 | 64/128-bits WEP WPA, WPA-PSK WPA2, WPA2-PSK 802.1X |
| 无线隔离 | Able to isolate each connected wireless clients for independent access. |
| 无线安全 | Provides wireless LAN ACL (Access Control List) filtering Wireless MAC address filtering WPS (Wi-Fi Protected Setup) Enable/Disable SSID Broadcast |
| WPS (Wi-Fi Protected Setup) | A protection mechanism prevents collisions among 802.11b/g modes |
| 无线客户端 | 25 |
| Max. WDS AP | 4 |
| 软件特性 | |
| LAN端口 | Built-in DHCP server supporting static IP address distributing Supports UPnP Supports IGMP Proxy, DNS Proxy Supports 802.1d STP - Spanning Tree Protocol |
| WAN协议 | ??? Static IP ??? DHCP (Dynamic IP) ??? PPPoE ??? PPTP ??? L2TP |
| VPN Passthrough | ??? PPTP ??? L2TP ??? IPSec |
| 操作模式 | ??? Bridge ??? Gateway ??? Ethernet Converter (WISP) |
| 防火墙功能 | NAT firewall with SPI (Stateful Packet Inspection) Built-in NAT server supporting Port Forwarding (Virtual Server), and DMZ Built-in firewall with Port / IP address / MAC / URL filtering |
| .有线客户端 | 60 |
| NTP | Network Time Management |
| 管理 | Web UI, DHCP Client, Configuration Backup & Restore, Dynamic DNS |
| 诊断工具 | System Log |
| 环境与认证 | |
| 工作温度&湿度 | -20~70 degrees C 10~95% non-condensing |
| 储存温度&湿度 | -30~80 degrees C 5~95% non-condensing |
| 法规 | CE / RoHS |
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
智慧城市网 设计制作，未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
