通信电缆 网络设备 无线通信 云计算|大数据 显示设备 存储设备 网络辅助设备 信号传输处理 多媒体设备 广播系统 智慧城市管理系统 其它智慧基建产品
深圳市锦辰科技有限公司
深圳市锦辰科技有限公司
SlimtypewithmorepracticabilityandconvenienceAfterPLANETISW/IFTFastEthernetSwitch/Converterseriesbecomepopular
| Slim type with more practicability and convenience After PLANET ISW/IFT Fast Ethernet Switch/Converter series become popular, PLANET has released the advanced industrial hardened Fast Ethernet Switch series with slim type, IP30 metal case. The compact, IP30 standard metal case allows either DIN rail or wall mounting to have the efficient use of cabinet space. The ISW-501T, one of the new models, is equipped with five 10/100Mbps auto negotiation ports and operates reliably in heavy industrial demanding environments. Stable operating performance under difficult environments The ISW-501T provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb side traffic control cabinets. Being able to operate under the temperature range from -40 to 75 degrees C, the ISW-501T can be placed in almost any difficult environment. The ISW-501T also possesses an integrated power supply source with wide range of voltages (12 to 48V DC) for worldwide high availability applications requiring dual or backup power inputs. Robust switch performance The ISW-501T offers high performance switch architecture. With the five 10/100Mbps Fast Ethernet ports providing non-blocking switch fabric and wire-speed throughput as high as 1Gbps and the 2K MAC Address table, the ISW-501T can perform wire-speed packets transfer without risk of packet loss. The flow control function enables the ISW-501T to provide fast and reliable data transfer. All of the RJ-45 copper interfaces in the ISW-501T support 10/100Mbps auto negotiation for optimal speed detection through RJ-45 Category 3, 4 or 5 cables. The standard auto-MDI / MDI-X support can detect the type of connection to any Ethernet device without requiring special-through or crossover cables. |
| Industrial area switch for data collection and forwarding The ISW-501T is equipped with five 10/100Mbps ports that offer auto MDI / MDIX feature, 1Gbps non-blocking switch fabric and 2K MAC Address table; therefore, it can perform wire-speed packets transfer without risk of packet loss. The ISW-501T, with the slim type IP30 metal case protection, is ideal for the most heavy industrial demanding environments. |
 |
| Physical Port � 5-Port 10/100Mbps RJ-45 with auto MDI / MDI-X function Layer 2 Features � Complies with IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX Ethernet standard � Supports auto negotiation and 10/100Mbps half / full duplex mode � High performance Store and Forward architecture, broadcast storm control, runt / CRC filtering eliminates erroneous packets to optimize the network bandwidth � Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex) � Backplane (Switching Fabric)?1Gbps � Integrated address look-up engine, supporting 2K absolute MAC addresses � Automatic address learning and address aging � CSMA / CD Protocol Industrial case / installation � IP30 metal case � DIN rail and wall mount design � 12 to 48V DC, redundant power with polarity reverse protect function and connective removable terminal block for master and slave power � Supports EFT protection 6000V DC for power line � Supports 6000V DC Ethernet ESD protection � -40 to 75 degrees C operating temperature � Free fall, shock, vibration industrial stability |
| 硬件特性 | |
| 电口 | 5 |
| 尺寸 | 135 x 87 x 32 mm |
| 重量 | 438g |
| 电源要求 | 12~48V DC, redundant power with polarity reverse protection function |
| 功率/损耗 | 3.9 watts / 13BTU |
| 安装方式 | DIN rail kit and wall mount ear |
| 报警功能 | Provides one relay output for power failure Alarm relay current carry ability: 3A @ DC 30V |
| 2层特性 | |
| 处理方式 | Store-and-Forward |
| MAC地址表 | 2K entries |
| 流量控制 | Back pressure for half duplex, IEEE 802.3x pause frame for full duplex |
| 背板带宽 | 1Gbps |
| 吞吐量 | 0.74Mpps |
| 网线类型 | 10/100Base-TX: Cat. 3, 4, 5, 5e, 6 UTP cable (100meters, max.) EIA / TIA-568 100-ohm STP (100meters, max.) |
| 标准一致性 | |
| 标准一致性 | IEEE 802.3 Ethernet IEEE 802.3u Fast Ethernet IEEE 802.3x full-duplex flow control |
| 遵从法规 | FCC Part 15 Class A, CE |
| Stability Testing | IEC60068-2-32(Free fall),IEC60068-2-27(Shock),IEC60068-2-6(Vibration) |
| 环境 | |
| 温度 | Operating: -40~75 degrees C Storage: -40~75 degrees C |
| 湿度 | Operating: 5~90% Storage: 5~90% (non-condensing) |
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
智慧城市网 设计制作，未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
