通信电缆 网络设备 无线通信 云计算|大数据 显示设备 存储设备 网络辅助设备 信号传输处理 多媒体设备 广播系统 智慧城市管理系统 其它智慧基建产品
深圳市锦辰科技有限公司
深圳市锦辰科技有限公司
暂无信息 |
Cost-effectiveManagedPoESwitchforSMBNetworkingPLANETFGSW-2620VMP4SwitchfeaturesIEEE802
| Cost-effective Managed PoE Switch for SMB Networking PLANET FGSW-2620VMP4 Switch features IEEE 802.3af Power over Ethernet (PoE) function which optimizes the installation and safe power management of network devices such as wireless access points (AP), Voice over IP (VoIP) phones and IP surveillance cameras. IEEE 802.3af PoE capabilities reduce installation costs of add-in network productivity devices. It frees the network device deployment from restrictions of power outlet locations. With PoE features, power and data switching are integrated into one unit and delivered over a single cable, which eliminates costs for additional AC wiring and reduces time for installation. It provides a compact, affordable, safe and reliable power solution for small to medium enterprises. For catering to the need of easy management and centralized SNMP application to monitor the status of the switch and traffic per port, the cost-effective Managed PoE Switch, FGSW-2620VMP4, offers the following key features:
Full PoE Power Budget, Easy Cabling Installation The FGSW-2620VMP4 PoE Managed Switch offers totally 380-watt PoE power budget. The PoE in-line power following IEEE 802.3af standard makes the FGSW-2620VMP4 able to power on 24 PoE compliant devices at the distance up to 100 meters through the 4-pair Cat 5/5e UTP wire. With data and power over Ethernet from one unit, the FGSW-2620VMP4 will reduce cable deployment and eliminate the need for dedicated electrical outlets on the wall, ceiling or any unreachable place. An Ethernet wire carries both data and power bringing the benefits of lower installation costs, fewer installation effort and less need for electricians or extension cords. And the key feature of the solution is energy saving. With more efficient switching power supply, the efficiency of the FGSW-2620VMP4 would be much better than four linear power adapters in a long run. Centralized Power Distribution with Remote Management The remote PoE management functions of the FGSW-2620VMP4 make it easy to survey and control the PoE power provision to the devices and ensure interoperability with equipment from other vendors. Via Web interface, SNMP trap and SNMP monitoring, the network manager can get the PoE device status and alert immediately. The over-temperature protection of the PoE Switch offers a safe and stable PoE operating by limiting the output power according to detected temperature in order to avoid destructive breakdown due to unexpected overheating. High Performance Wire-Speed Switching PLANET FGSW-2620VMP4 offers 24 10/100Mbps Fast Ethernet ports and 2 Gigabit TP/SFP combo ports. The two Gigabit TP/SFP combo ports can be either 1000Base-T for 10/100/1000Mbps or 1000Base-SX/LX through SFP (Small Factor Pluggable) interface. The FGSW-2620VMP4 boasts a high performance switch architecture that is capable of providing non-blocking switch fabric and wire-speed throughput as high as 8.8Gbps. Its two built-in GbE uplink ports also offer incredible extensibility, flexibility and connectivity to the Core switch or Servers. Efficient Management To meet the growing network, PLANET FGSW-2620VMP4 provides console and telnet commａnd line interface, advanced WEB and SNMP management interface. With its built-in Web-based management, the FGSW-2620VMP4 offers an easy-to-use, platform-independent management and configuration facility. The FGSW-2620VMP4 supports standard Simple Network Management Protocol (SNMP) and can be monitored via any standard-based management software. For text-based management, the FGSW-2620VMP4 can also be accessed via Telnet and the console port. Moreover, the FGSW-2620VMP4 offers secure remote management by supporting Secure Socket Layer (SSL) connection which encrypts the packet content at each session. Robust Layer 2 Features For efficient management, via Web interface the FGSW-2620VMP4 can be programmed for basic switch management functions such as port speed configuration, Port Link Aggregation, IEEE 802.1Q VLAN and Q-in-Q VLAN, Port Mirroring, Rapid Spanning Tree and ACL security. Additionally, the firmware includes advanced features such as IGMP snooping, QoS (Quality of Service), broadcast storm and Bandwidth Control to enhance bandwidth utilization. Advanced Security and Quality of Service The FGSW-2620VMP4 offers comprehensive Layer 3 and Layer 4 Access Control List (ACL) to filter out unwanted traffic. Its protection mechanisms comprises RADIUS and Port-based 802.1x user and device authentication. Moreover, the Switch provides MAC filter, Static MAC, IP/MAC binding and Port Security for enforcing security policies to the edge. The administrators can now construct highly secured corporate networks with considerably less time and effort than before. To ensure IP voice and video communication get the quality of service needed, the FGSW-2620VMP4 classifies traffic and prioritizes Layer 2 802.1p or Layer 3 IP DSCP traffic into four hardware queues that support strict or Weighted Round Robin (WRR) queuing algorithms. It also empowers the SMB IP office to take full advantages of the limited network resources and guarantees the best performance in VoIP and Video conferencing transmission. | |||
| PoE IP Telephony Office With the business office expansion, the additional telephones required can be installed at less cost via the implementation of PoE IP Telephony system than that of the traditional circuit wiring telephony system. PLANET FGSW-2620VMP4 Managed PoE Switch helps SMBs to create an integrated data, voice, and powered network. PLANET IEEE 802.3af compliant IP phones can be installed without the need of an additional power cables because the power can be provided from the standard Ethernet cable connecting to the FGSW-2620VMP4. PoE IP phones and analog Telephony adapter work perfectly with the FGSW-2620VMP4 which injects power through the Ethernet cables and the IP DSCP priority of QoS feature improves the voice communicating. With the FGSW-2620VMP4, IP Telephony deployment becomes more reliable and cost effective which helps SMBs save tremendous cost when upgrading from the traditional telephony to IP Telephony communications infrastructure. |
 |
| Department / Workgroup PoE Switch Providing up to 24 PoE, in-line power interface, the FGSW-2620VMP4 Managed PoE Switch can easily build a central power controlled IP phone system, IP camera system, or wireless AP group for the enterprises. For instance, PoE IP cameras can be easily installed in the company for surveillance demands or PoE wireless APs be installed to build a wireless roaming environment in the office. Without the power-socket limitation, the PoE Switch makes the installation of IP cameras or WLAN APs easier and more efficient. |
| Factory / Warehouse Applications While video surveillance system becomes more and more important for visible security in the factory and warehouse, the IP cameras with PoE function would be a lot helpful for the surveillance deployment when the power outlet is not easily found on the ceiling or in the outdoors. For example, in the factory operation or in the warehouse storage security, the PoE IP cameras can be installed anywhere when needed regardless of the restrictions of power outlet location. With the PoE Switch as the central control manager and offering remote power monitoring via Web interface or SNMP trap and SNMP monitoring, the network manager can get the status and alert of PoE devices immediately. The PoE IP cameras can also be controlled remotely, which increases the administrator management efficiency and improves the productivity. |
 |
| Physical Port � 24 10/100Mbps Fast Ethernet ports with PoE Injector function � 2 10/100/1000Mbps TP and 1000Mpbs SFP shared combo interfaces � Reset button for system management � 1 RS-232 male DB9 console interface for basic Switch management and setup Power over Ethernet � Complies with IEEE 802.3af Power over Ethernet End-Span PSE � Provides 380-watt power (maximum) to 24 IEEE 802.3af devices � Supports PoE Power up to 15.4 watts for each PoE port � Auto detects powered device (PD) � Circuit protection prevents power interference between each port � Remote power feeding up to 100m � PoE Management ?�Total PoE power budget control ?�Per port PoE function enable/disable ?�PoE Port Power feeding priority ?�Per PoE port power limit ?�PD classification detection Layer 2 Features � Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z Gigabit Ethernet standard � Supports auto-negotiation and full-duplex / half-duplex modes for all 10Base-T/100Base-TX and ?1000Base-T ports � Auto-MDI/MDI-X detection for each RJ-45 port � Prevents packet loss flow control ?�IEEE 802.3x pause frame flow control for full-duplex mode ?�Back-pressure flow Control in half-duplex mode � High performance Store-and-Forward architecture, runt / CRC filtering eliminate erroneous packets to ?optimize the network bandwidth � Broadcast / Multicast / Unicast storm control � 8K MAC address table, automatic source address learning and ageing � 2Mbit embedded memory for packet buffers � Supports VLAN ?�IEEE 802.1Q Tag-based VLAN ?�Port-based VLAN ?�Q-in-Q tunneling ?�Up to 255 VLANs groups, out of 4041 VLAN IDs � Supports Link Aggregation ?�up to 13 trunk groups ?�up to 8 ports per trunk group with 1.6Gbps bandwidth (full-duplex mode) ?�IEEE 802.3ad LACP (Link Aggregation Control Protocol) ?�Cisco ether-channel (Static Trunk) � Spanning Tree Protocol ?�STP, IEEE 802.1D (Classic Spanning Tree Protocol) ?�RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol) � Port Mirroring to monitor the incoming or outgoing traffic on a particular port Quality of Service � 4 priority queues on all switch ports � Traffic classification ?�IEEE 802.1p CoS ?�IP TOS / DSCP to 802.1p priority mapping ?�Port-based priority � Strict priority and Weighted Round Robin (WRR) CoS policies � Supports QoS and In/Out bandwidth control on each port Multicast � Supports IGMP Snooping v1 and v2 � IGMP Snooping v2 fast leave � Querier mode support Security � IEEE 802.1x Port-based network access control protocol � RADIUS users access authentication � L3 / L4 Access Control List (ACL) � MAC Filtering and Source IP-MAC / Port-Binding � Port Security for Source MAC address entries filtering Management � Switch Management Interface ?�Telnet Commａnd Line Interface ?�Web switch management ?�SNMP v1, v2c switch management ?�SSL switch management � DHCP client for IP address assignment � Built-in Trivial File Transfer Protocol (TFTP) client � Firmware upgrade via TFTP or HTTP � Configuration upload/download via TFTP or HTTP � Four RMON groups 1, 2, 3, 9 (history, statistics, alarms, and events) � SNMP trap for interface Link Up and Link Down notification � Supports Ping function |
| 硬件特性 | |
| 百兆电口 | 24 10/100Base-TX RJ-45 auto-MDI / MDI-X ports |
| 千兆电口 | 2 10/100/1000Mbps RJ-45 auto-MDI / MDI-X ports |
| 千兆光口 | 2 1000Base-SX/LX/BX, shared with Port-25~Port-26 |
| 交换方式 | Store-and-Forward |
| 背板带宽 | 8.8Gbps / non-blocking |
| 吞吐量 | 6.547Mpps @64Bytes |
| MAC地址表 | 8K entries |
| Share Data Buffer | 512Kbytes |
| 数据帧大小 | 9K Bytes |
| 流量控制 | Back pressure for half-duplex IEEE 802.3x pause frame for full-duplex |
| LED指示灯 | Power, Fan Alarm Link / Activity (Green) PoE In-Use (Amber) 1000 LNK / ACT(Green) 10/100 LNK / ACT(Green) |
| 尺寸 (W x D x H) | 440 x 300 x 44 mm, 1U height |
| 重量 | 4.2kg |
| 重置按钮 | < 5 secs: System reboot > 10 secs: Factory default |
| 电源输入 | 100 ~ 240V AC, 50 / 60Hz, Auto-sensing |
| 功率/损耗 | 400 watts / 1372.4 BTU |
| 以太网供电（PoE） | |
| PoE Standard | IEEE 802.3af Power over Ethernet / PSE |
| PoE Power Supply Type | End-span |
| Power Pin Assignment | 1/2(+), 3/6(-) |
| PoE Power Output | Per Port 48V DC, 350mA . Max. 15.4 watts |
| PoE Power Budget | 380 watts |
| Max. number of Class 2 PD | 24 |
| Max. number of Class 3 PD | 24 |
| 2层特性 | |
| 管理方式 | Console, Telnet, Web Browser, SSL, SNMPv1, v2c |
| 端口设定 | Port disable / enable Auto negotiation 10/100/1000Mbps full and half duplex mode selection Flow Control disable / enable |
| 端口状态 | Display each ports speed duplex mode, link status and flow control status Auto negotiation status, trunk status |
| 端像 | TX / RX / Both 1 to 1 monitor |
| 带宽控制 | Ingress / Egress Rate Control Allow to configure per 128Kbps |
| VLAN | IEEE 802.1Q Tag-based VLAN Port-based VLAN Q-in-Q tunneling Up to 255 VLANs groups, out of 4041 VLAN IDs |
| 链路聚合 | Supports 13 groups of 8-port trunk, IEEE 802.3ad LACP |
| QoS | Traffic classification based on Port priority, 802.1p priority, DSCP / TOS field in IP Packet |
| IGMP Snooping | IGMP (v1/v2) Snooping, up to 256 multicast groups |
| 访问控制列表(ACL) | IP-based ACL / MAC-based ACL Up to 220 ACL rule entries |
| SNMP MIBs | RFC-1213 MIB-II RFC-2863 Interface MIB RFC-2665 EtherLike MIB RFC-1493 Bridge MIB RFC-2819 RMON MIB (Group 1, 2, 3,9) Power-over-Ethernet-MIB |
| 标准一致性 | |
| 遵从规则 | FCC Part 15 Class A, CE |
| 安全 | UL, cUL |
| 标准一致性 | IEEE 802.3?10Base-T IEEE 802.3u?100Base-TX IEEE 802.3z?1000Base- SX/LX IEEE 802.3ab?1000Base-T IEEE 802.3x?Flow control and back Pressure IEEE 802.3ad?Port trunk with LACP IEEE 802.1D?Spanning Tree Protocol IEEE 802.1w?Rapid Spanning Tree Protocol IEEE 802.1p?Class of Service IEEE 802.1Q?VLAN Tagging IEEE 802.1x?Port Authentication Network Control RFC 768?UDP?? RFC 793?TFTP? RFC 791?IP RFC 792?ICMP? RFC 2068?HTTP RFC 1112?IGMP version 1 RFC 2236?IGMP version 2 |
| 环境 | |
| 工作 | Temperature: 0 ~ 50 degrees C Relative Humidity: 20 ~ 95% (non-condensing) |
| 存储 | Temperature: -10 ~ 70 degrees C Relative Humidity: 20 ~ 95% (non-condensing) |
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
智慧城市网 设计制作，未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
