Standalone 10G OEO Converter （3R Repeater） with SFP+ to SFP+ Slot, XFP to XFP Slot, SFP+ to XFP Slot optional
10G OEO Converter (3R Repeater)
Standalone 10G OEO Converter (3R Repeater) with SFP+ to SFP+ Slot, XFP to XFP Slot, SFP+ to XFP Slot optional , which uses optical -electricity – optical conversion principle to realize optical signal regeneration , enabling of the optical signal amplification and regeneration , re-timing, and wavelength conversion , with coarse / dense wavelength division multiplexing together to realized WDM transmission . It is now possible to quickly improve communication capacity , expand the bandwidth on present network , while using low-cost, high cost-effective solutions to manage and run the system , easy operation .
Key Features
- Logging to syslog server
- SNMP read
- SNMP trap
- Line/Network/Center side and Client/Access side Link Fault Passthrough
- Line/Network/Center side and Client/Access side Loopback
- Line/Network/Center side and Client/Access side DDM/DMI
- Line/Network/Center side and Client/Access side 1310 transceiver
- 9k+ frame size
- Support 2U Rack（16 Slots ）and independent use
- support network management（Web SNMP, Console）,
- Support in-band management
- support ITUT prescribed DWDM/CWDM wavelength
- transmission rate:125Mbps~2.5Gbps
- Support Jumbo Frame
- Transparent Transport and very low delay
- support DMI function for SFP fiber module
- support hot plugging
- Full State Led display
- Easy installation
Specification
Performance Data | Technical Indexes |
| |
Equipment function | 3R Repeater |
| |
Transmission Speed | 10Gb/s （ 9.95Gb/s-11.35Gb/s ） |
| |
Protocols | IEEE802.3ae (10Gbase-SR/LR/ER/ZR/LRM) |
| |
Access Type | 10G LAN/ 10G WAN |
| |
Interface Type | Type A: SFP+ To/From SFP+ |
| Type B: SFP+ To/From XFP |
| Type C: XFP To/From XFP |
| |
Transmission | SFP+ module: Up to 80Km |
Distance | XFP module: Up to 80Km |
| |
Maximum Packet | 14,880,950/S |
Forwarding Rate | |
Network | • Card type information | |
management | • SFP+ or XFP fiber module detection | |
information: | • SFP+ or XFP fiber module DMI function （ Temperature 、 Voltage | 、 |
| Optical power ） | |
| • Link status detector | |
| • Enable/Disabled Loopback test function | |
| • Enable/Disable PRBS Generator and checker function | |
| • Rate select （ 10Gbase-Lan or Wan ） | |
| • Remote card's status monitor （ only in pairs ） | |
power requirement | Rack-mountable : AC 85 ～ 220V OR DC -48V | |
| Standalone: AC 220V OR DC -48V | |
| Power consumption: ≤6W | |
| | |
Work Environment | Operating Temp: 0~ 50 ℃ | |
| Storage Temp: -10~ 70 ℃ | |
| Humidity: 5%~90% （ non-condensing ） | |
| | |
Dimension | Card ： 115mm （ W ） × 78mm （ D ） | |
| Standalone ： 156mm （ W ） × 128mm （ D ） × 32mm （ H ） |
| | |
