SOLAIR5100尘埃粒子计数器-苏州星源洁净环境科技有限公司

SOLAIR5100尘埃粒子计数器

技术资料
粒径范围	0.5-25微米
通道大小	标准:0.5,0.7,1.0,3.0,5.0,10.0 微米标准: 0.5,1.0,3.0,5.0,10.0,25.0微米
计数效能	@0.5 微米;99%@微粒>0.75 微米(每JIS B 9921 和 ISO 21501-4 )
流速	1.0立方英尺/分钟(28. 3 升/分钟)
激光源	超长寿命激光二级管技术>20年平均*时间
零计数度	<1计数/5分钟(每JIS)
校准	符合ISO 21501-4校准标注
计数模式	自动，手动，蜂鸣，浓度，累积/独立
数据存储	3000组样本记录，循环缓存(包括微粒和环境状态数据,外加区域时间等)
通信模式	RS-232 由经 RJ-45 to 计算机 RS-485 MODBUS
软件支持	LMS XChange, LMS Express, LMS Express RT and LMS Express RT+, LMS Net
环境测量传感器	可选择(外接4个传感器):温度计, 湿度计,空气测速器,微分压力计等.
浓度限制	1,000,000微粒/立方英尺 (35,300,000/立方米) @10% 重叠损失,符合ISO 1到8级洁净室标准
触摸显示屏	5.7英寸（14.47厘米），彩色，320×240
报告	ISO-14644-1EU GMP Annex 1 和 FS-209 报告模式的通过/失败报告向导
报警	完整的蜂鸣报警和外部报警连接件，计数、低电量故障报警
样本输出	内置式高效过滤器(>99.997%@0.3微米)
真空源	内置真空泵：可以使用长达12米（400英尺）的采样管
外壳	不锈钢外壳
电源	100-240伏,50-60赫兹
电池	可拆卸可充电锂电池
尺寸	9.96英寸(长)×8.0英寸(宽)×10.16英寸（高）[25.3 x 20.32 x20.81 cm]
重量	带电池:14.9磅(6.8公斤) 不带电池12.95磅( 5.9公斤)
环境要求
操作	温度50°F到104°F(10°Ｃ到４０°Ｃ)／湿度20%到95%无凝结
存储	温度14°F到122°F(-10°Ｃ到5０°Ｃ)／湿度98%无凝结
配件
随机配件	CD操作手册，等动力采样探头（带有三角支架和管道），净化过滤器，电缆线和备用保险丝，LMS Xchange 数据传输软件, 打印机,打印纸。
备选项	无线网络适配器，可拆卸/可充电锂电池；带轮便携箱；洁净室推车；温湿度探头；差压探头；空气流速探头；智能过滤扫描探头；备用可拆卸/可充电锂电池；外置式电池充电器；LMS Express 软件；RT 软件,；LMS Pharma版软件；LMS标准软件；认证文件；使用说明书。

便携式空气粒子计数器：0.5微米感应度，1.0CFM流量

Number 1 in Versatility
The SOLAIR 5100 is the most versatile particle counter on the market today.
Whether you are certifying your cleanroom to ISO standards, performing routing testing, counting particles in your compressed gas lines, scanning your HEPA filters for leaks, challenge testing your HEPA filters or measuring environmental parameters such as TRH, DP, AV the SOLAIR 5100 portable particle counter is the right instrument to get the job done.

Cleanroom Certification
· Whether you are certifying to current ISO 146644 standards, EU GMP Annex 1 or Federal Standards 209E, the SOLAIR 5100 has you covered with its certification report wizard.

Routine Testing
· Routine testing is a breeze with the intuitive interface, zoom screen and on board sample recipes.

Troubleshooting
· With beep and concentration sample modes the SOLAIR 5100 will simplify the identification of particle sources within your clean room.

Compressed Gas Testing
· The SOLAIR 5100 can be used to test for particle counts in compressed air by utilizing a high pressure diffuser or high pressure controller. Particles can be tested down to 0.5 micron.

HEPA Filter Scanning
· The scanning of HEPA filters is a critical step to ensure the integrity of the HEPA filter and overall cleanliness of the clean room. The ScanAir attachment from Lighthouse makes filter scanning an easier operation.

HEPA Filter Challenge Testing
· Monitoring of other environmental parameters such as Temp, Humidity, Differential Pressure or Air Velocity.

Other Environmental Sampling
· The SOLAIR 5100 can record data from up to 4 environmental sensors that plug into and are powered by the SOLAIR 5100. Data is recorded into the 3,000 record data buffer and can be downloaded along with the particle count data to your computer of via USB key.

Ease of Use
Spend less time configuring your particle counter and more time counting particles. The SOLAIR 5100 features one of the industry’s best and easy to use touch screen interface (UI). With ICON-driven menus, concise layout and enhanced responsiveness, sample configuration is a breeze.
The intuitive interface reduces learning uptime for new users and simplifies the writing of SOP’s for operation.
For clean room certification the SOLAIR 5100 has an integrated report wizard that makes clean room certification a breeze. Once the basic sample parameters are input the wizard will prompt the end user to move to the next sample location, this helps to ensure no sample locations are missed.
The configurable recipe database can store up to 50 recipes for sampling and reports. These recipes reduce operator configuration errors as well as setup time.
Lighter is better and the SOLAIR 5100 particle counter is one of the lightest particle counters on the market at only 12 lbs. without battery and 13.4 with a battery.
The SOLAIR 5100 can be powered via onboard battery or plugged directly into a power outlet for extended use. With the fastest battery recharge time of any portable on the market the SOLAIR 5100 offers unrivaled uptime.
Data from the SOLAIR 5100 can be downloaded directly to a standalone software package or a real time monitoring system from Lighthouse.
Flexible communications with these instruments is made possible by the integrated Ethernet, RS-485, USB and USB flash drive interfaces.

Reliability
The SOLAIR 5100 incorporates our extreme life laser diode technology sensor to produce the industry’s longest laser diode life of 20+ year MTTF (based on continuous 24/7 operation).
The vacuum system within the SOLAIR 5100 was designed with closed loop feedback to ensure accurate sample volumes. The vacuum pump was designed and built by Lighthouse to ensure long term reliability.
The SOLAIR 5100 is designed, manufactured and calibrated to ISO 21501-4 to ensure particle-counting accuracy.
The SOLAIR 5100 can store up to 3,000 records of particle count data from up to 8 particle channels and the configurable recipe database can store up to 50 recipes for sampling and reports. All data can be quickly and reliably transferred to a computer, a Facility Monitoring System or a Building Automation System. Secure data transfer (per 21 CFR Part 11) to a USB flash drive can be accomplished by using the Lighthouse secure data transfer feature and LMS Express software.
Key Features:
· 1.0 CFM (28.3 LPM) flow rate
· Up to 8 particle sizes
· Number 1 in class for versatility
· Industries Best User Interface
· ISO 21501-4 Compliant
· One of the lightest portables on the market
· 20-year MTTF laser lifespan
· Stainless steel construction
· 21 CFR Part 11 compliant secure data transfer via USB flash drive
· Report wizard for cleanroom pass/fail reports: FS-209E, ISO 14644-1 (2015 version) ａnd EU GMP Annex 1
· Multiple communication interfaces; USB, RS-485, Ethernet and USB flash drive
· 5.7-inch color TFT touch screen display
· 3,000 record data storage memory
· 50-record configurable recipe database
· Multiple-language support: English, French, German, Italian, Spanish, Chinese, Russian, Japanese, Korean