| General Technical |
| Input/Output frequency range | 2400 to 2500 MHz |
| 4900 to 6000 MHz |
| IF bandwidth | 120 MHz |
| Input power range | +30 dBm peak (+25 dBm average) |
| Output power range(CW) | 10 to -100 dBm |
| Input power accuracy | Specification: | ± 0.5 dB |
| Typical: | ± 0.3 dB |
| Output power accuracy | Specification: | ± 0.75 dB ( 0 to -90 dBm) |
| ± 1.50 dB ( -90 to -100 dBm) |
| ± 1.50 dB ( 0 to 10 dBm) |
| Typical: | ± 0.50 dB ( 0 to -90 dBm) |
| ± 1.00 dB ( -90 to -100 dBm) |
| ± 1.00 dB ( 0 to 10 dBm) |
| Input/Output return loss | > 13 dB |
| Sampling data rate | 120 Msps |
| Port to Port Isolation | > 60 dB |
| WiFi(802.11a/b/g/n/ac/p) |
| EVM | Residual VSA/VSG EVM
(full packet channel estimation): | ≤ -44 dB for 20 M（typical: -49 dB） |
| ≤ -42 dB for 40 M（typical: -46 dB） |
| ≤ -40 dB for 80 M（typical: -43 dB） |
| Peak power | VSA power accuracy:± 0.5 dB (+20 to -45 dBm) |
| RMS power |
| Frequency error | VSA measurement error: | ≤ ± 0.2 ppm calibrated |
| Spectral mask | Spectral mask view: ± 60 MHz |
| Spectral flatness | VSA flatness over 80 MHzBW: ± 0.5 dB |
| CCDF(complementary cumulative distribution function) | Probability of peak signal power being greater than a given power level versus peak-to-average power ratio(Db) |
| Bluetooth(1.0/2.0/3.0/4.0/4.1/4.2/5.0)/BLE |
| TX output power | VSA power accuracy:± 0.5 dB (+ 20 to - 45 dBm) |
| TX output spectrum |
| Modulation characteristics | (For EVM better than -25 dB)
VSA measurement error:≤± 0.2 ppm calibrated |
| Carrier frequency tolerance |
| Carrier frequency drift |
| RMS EVM (EDR) | Residual VSA EVM: ≤-35 dB (+20 to -30 dBm)
Residual VSG EVM: ≤-35 dB (-10 to -70 dBm) |
| Peak EVM (EDR) |
| ZigBee(802.15.4) |
| Output power | VSA power accuracy: | ± 0.5 dB (+20 to -45 dBm) |
| Power spectral density |
| Center Frequency Tolerance | VSA frequency accuracy: | ≤ ± 0.2 ppm calibrated |
| EVM | Offset:compensate the I and Q offset in OQPSK |
| Normal:no compensation applied |
| Other modulation quality measurements | LO leakage,clock error,phase error,symbol clock error |
