当前位置：广州市蓝河电子设备有限公司>>硬度计>>DID-4数显扭力起子

DID-4数显扭力起子

返回列表页

参考价

面议

具体成交价以合同协议为准

产品型号

品牌

厂商性质经销商

所在地广州市

在线询价收藏产品查看联系电话

联系方式：胡乐乐查看联系方式

更新时间：2022-05-07 12:54:44浏览次数：139次

联系我时，请告知来自智慧城市网

产品分类 品牌分类

  硬度计

全部产品列表

暂无信息

广州市蓝河电子设备有限公司

经营模式：经销商

商铺产品：216条

所在地区：广东广州市

联系人：胡乐乐（销售）

询价 给他留言

产品简介

DID-4数显扭力起子Screwtighteningcontrol●DIGITALTORQUEDRIVER　DID-4M(1)Unifythedisplaysectionaframe

详细介绍

DID-4数显扭力起子

Screw tightening control

● DIGITAL TORQUE DRIVER 　DID-4M

(1) Unify the display sectiona frame. It became stronger.
(2) Display Measurement Mode, Unit, Etc. on Display Section.
(3) Data Output is USB Form.
(4) Prepare each button in accordance with operation.
Button operation became simple

＊The torque screwdriver is Ergonomiclight weight, yet ruggedly constructed
＊Available in: lb-in, kg-cmN-m
＊Peak, Real TimePeak Down measuring mode (selectable)
＊800 data memory.
＊Programmable HighLow set points with both audible beepGreen/Red LED indicator for uniform torque tightening or GO/NO GO testing
＊Programmable screw tightening counter
＊Programmable Auto Zero function resets unit to zero for easy operation
＊Both CWCCW operation
＊ASCII format output(USB)
＊Runs on internal NiCad batteries (for 12 hours) Auto shut-off after 10 min. of non-use
＊ AC chargercarrying case included.

Specification		DID-4
Measuring range		0.020 - 4 N-m
		0.20～40 kgf-cm
		0.20～35 lbf-in
Accuracy		± 0.5% (in case of reading 499 or less = last digit +/- 3 reading)
Display		The 4 figures digital display of LCD
The measurement direction		CW-CCW (rightleft)
Measuring mode	P-P Peak	Holding Peak Load Value
	T-R Track	Showing Real time torque value ( Used for Zero-Adjustment )
	P-D Peak down	Holding Load Value at the moment to change from upward to downword
	C Real-time output	Load torque value is outputted every about 1/ 160.
Decision function	Setting of torque value	Programmable HighLow setpoints with both audible beepGreen/Red LED indicator for uniform torque tightening or GO/NO GO testing
The Maximum, the minimum,the average value		Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Data spec.	Data transfer	ASCII format (Baud rate : 19200) When outputting data,the cable(USB miniB) is needed.
	Data memory	800 data / ten channels data
A setup of the number of counts		One to 99 count (count in a direction with a bundle)
Power supply		Ni-Cd chargeable battery 1.2V×4cells 600mAh
Auto power save		10 minutes no use, automatically switch off.
Charging time		From empty - less than 5hours
Continunous working time		12 hours
Bit /Socket part		HEX6.35
Weight		about 400g
Attachment		Bit　（＋）　＃１　＃２
Accessories (one piece each)		Dedicated AC/DC Adaptor (Charger),100～230VAC
		An inspection report, a proofreading certificate, a traceability system figure