廊坊凯信密封材料有限公司(廊坊东润密封材料有限公司)
缠绕式垫片压缩性能,回弹性能良好,具有多道密封和一定的自紧功能,对于法兰压紧面的表面缺陷不太敏感,不粘结法兰密封表面,可部分消除压力.温度变化和机械振动的影响;能在高温.低温.高真空.冲击振动等循环交变的各种苛刻条件下,保持其优良的密封性能。
耐高压缠绕垫型式
缠绕垫片为半金属密合垫中回弹性佳的垫片,缠绕垫片结构密度可依据不同的锁紧力要求来制作,并利用内外钢环来控制其大压紧度,金属缠绕垫片接触的法兰密封面的表面精度要求不高。
缠绕垫片特别适用于负荷不均匀、接合力易松弛,温度与压力周期性变化、有冲击或震动的场合。缠绕垫片是阀门、泵、换热器、塔、人孔、手孔等法兰连接处理想的静密封原件。 项目 厚度(mm) 公差(mm) 垫片厚度 4.5, 3.2 +0.2
-0.1 环厚度 3.0 ±0.24 【缠绕垫片】直径公差(即用于法兰的名义管道直径): DIN (mm) ANSI B16.5
BS1560 (mm)
Mss sp-44 API 605 公差 内环内径
垫片内径 <=600 <=24″>=26″ and <=34″ 0.5="">600 and <=800>24″ and <=34″>=36″ and <=60″ 0.9="">800 and <=1600>34″ and <=60″ 1.3="">1600 >60″ ±1.6 垫片外径 <=600 <=24″ <=24″ 0.9="">600 and <=160000>24″ and <=60″>24″ and <=60″ 1600="" 1.8="">60″ ±2.2 外环外径 >=1/2″ and <=60″ ±0.9 <=600 <=24″ 0-1.0="">600 and <=1000>24″ and <=34″ 0-1.8="">1000 and <=1600>34″ and <=60″ 0-2.2 【缠绕垫片】技术参数: 缠绕垫片系数 m=2.5-4 缠绕垫片使用压力 ≤25MPa 缠绕垫片使用温度 -196℃-700℃(氧化性介质中不高于600℃) 缠绕垫片小预紧比压 y=68MPa
耐高压缠绕垫型式
性 能:
1、适用范围广。能耐高温、高压和适应超低温或真空下使用。
2、应用补偿能力强。在高温、高压波动频繁的工位上,密封性能稳定、可靠性强。
3、有良好的密封性能。
4、使用安装方便。
Performance:
1, the scope of application-Canton. Can high temperatures, high pressure and adapt to ultra-low-temperature vacuum or use.
2, the ability of compensation. At high temperature, high pressure fluctuations frequent-position, the sealing performance stability and reliability.
3, a good sealing performance.
4, the use of the installation convenience