| General specifications |
|---|
| Sensing range | 35 ... 300 mm |
| Adjustment range | 50 ... 300 mm |
| Dead band | 0 ... 35 mm |
| Standard target plate | 100 mm x 100 mm |
| Transducer frequency | approx. 390 kHz |
| Response delay | approx. 50 ms |
| Indicators/operating means |
|---|
| LED green | Power on |
| LED yellow | solid yellow: object in the evaluation range
yellow, flashing: program function, object detected |
| LED red | solid red: Error
red, flashing: program function, object not detected |
| Electrical specifications |
|---|
| Operating voltage | 15 ... 30 V DC , ripple 10 %SS |
| No-load supply current | ≤ 20 mA |
| Input |
|---|
| Input type | 1 program input
lower evaluation limit A1: -UB ... +1 V, upper evaluation limit A2: +4 V ... +UB
input impedance: > 4.7 kΩ, pulse duration: ≥ 1 s |
| Output |
|---|
| Output type | 1 analog output 0 ... 10 V |
| Default setting | evaluation limit A1: 50 mm evaluation limit A2: 300 mm |
| Resolution | 0.4 mm at max. sensing range |
| Deviation of the characteristic curve | ± 1 % of full-scale value |
| Repeat accuracy | ± 0.5 % of full-scale value |
| Load impedance | > 1 kOhm |
| Temperature influence | ± 1.5 % of full-scale value |
| Approvals and certificates |
|---|
| UL approval | cULus Listed, General Purpose |
| CSA approval | cCSAus Listed, General Purpose |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient conditions |
|---|
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Mechanical specifications |
|---|
| Connection type | Connector M12 x 1 , 4-pin |
| Degree of protection | IP67 |
| Material | |
| | Housing | brass, nickel-plated |
| | Transducer | epoxy resin/hollow glass sphere mixture; foam polyurethane, cover PBT |
| Mass | 25 g |
