General information | |
Product type designation | CPU 414F-3 PN/DP |
Hardware product version | 01 |
Firmware version | V7.0 |
Engineering with | |
| STEP 7 V5.5 or higher with HSP 262 |
CiR – Configuration in RUN | |
CiR synchronization time, basic load | 100 ms |
CiR synchronization time, time per I/O byte | 15 µs |
Supply voltage | |
Rated value (DC) | |
| No; Power supply via system power supply |
Input current | |
from backplane bus 5 V DC, typ. | 1.3 A |
from backplane bus 5 V DC, max. | 1.6 A |
from backplane bus 24 V DC, max. | 300 mA; 150 mA per DP interface |
from interface 5 V DC, max. | 90 mA; At each DP interface |
Power loss | |
Power loss, typ. | 6.5 W |
Power loss, max. | 8 W |
Memory | |
Type of memory | RAM |
Work memory | |
| 4 Mbyte |
| 2 Mbyte |
| 2 Mbyte |
| No |
Load memory | |
| Yes; with Memory Card (FLASH) |
| 64 Mbyte |
| 512 kbyte |
| Yes; with Memory Card (RAM) |
| 64 Mbyte |
Backup | |
| Yes |
| Yes; all data |
| No |
Battery | |
Backup battery | |
| 180 µA; up to 40 °C |
| 850 µA |
| Dealt with in the module data manual with the secondary conditions and the factors of influence |
| 5 V DC to 15 V DC |
CPU processing times | |
for bit operations, typ. | 18.75 ns |
for word operations, typ. | 18.75 ns |
for fixed point arithmetic, typ. | 18.75 ns |
for floating point arithmetic, typ. | 37.5 ns |
CPU-blocks | |
DB | |
| 6 000; Number range: 1 to 16000 |
| 64 kbyte |
FB | |
| 3 000; Number range: 0 to 7999 |
| 64 kbyte |
FC | |
| 3 000; Number range: 0 to 7999 |
| 64 kbyte |
OB | |
| see instruction list |
| 64 kbyte |
| 1; OB 1 |
| 4; OB 10-13 |
| 4; OB 20-23 |
| 4; OB 32, 33, 34, 35 (shortest cycle that can be set = 500 µs) |
| 4; OB 40-43 |
| 3; OB 55-57 |
| 3; OB 61-63 |
| 1; OB 60 |
| 1; OB 90 |
| 2; OB 100, 102 |
| 9; OB 80-88 |
| 2; OB 121, 122 |
Nesting depth | |
| 24 |
| 1 |
Counters, timers and their retentivity | |
S7 counter | |
| 2 048 |
Retentivity | |
| Yes |
| 0 |
| 2 047 |
| Z 0 to Z 7 |
Counting range | |
| 0 |
| 999 |
IEC counter | |
| Unlimited (limited only by RAM capacity) |
S7 times | |
| 2 048 |
Retentivity | |
| Yes |
| 0 |
| 2 047 |
| No times retentive |
Time range | |
| 10 ms |
| 9 990 s |
IEC timer | |
| Yes |
| SFB |
| Unlimited (limited only by RAM capacity) |
Data areas and their retentivity | |
retentive data area in total | Total working and load memory (with backup battery) |
Flag | |
| 8 kbyte; Size of bit memory address area |
| Yes |
| MB 0 to MB 15 |
| 8; in 1 memory byte |
Data blocks | |
| 6 000; Number range: 1 to 16000 |
| 64 kbyte |
Local data | |
| 16 kbyte |
| 8 kbyte |
Address area | |
I/O address area | |
| 8 kbyte |
| 8 kbyte |
of which distributed | |
| 2 kbyte |
| 2 kbyte |
| 6 kbyte |
| 6 kbyte |
| 8 kbyte |
| 8 kbyte |
Process image | |
| 8 kbyte |
| 8 kbyte |
| 256 byte |
| 256 byte |
| 244 byte |
| Yes |
Subprocess images | |
| 15 |
Digital channels | |
| 65 536 |
| 65 536 |
| 65 536 |
| 65 536 |
Analog channels | |
| 4 096 |
| 4 096 |
| 4 096 |
| 4 096 |
Hardware configuration | |
Number of expansion units, max. | 21 |
connectable OPs | 63 |
Multicomputing | Yes; 4 CPUs max. (with UR1 or UR2) |
Interface modules | |
| 6 |
| 6 |
| 4; IM 463-2 |
Number of DP masters | |
| 1 |
| 10; CP 443-5 Extended |
| 4 |
| No; IM 467 cannot be used jointly with CP 443-5 Ext. or CP 443-1 in PROFINET IO mode |
| 1; IF 964-DP |
| 6 |
Number of IO Controllers | |
| 1 |
| 4; Max. 4 in the central controller; no mixed operation of different CP 443-1 types in PROFINET IO mode |
Number of operable FMs and CPs (recommended) | |
| Limited by number of slots and number of connections |
| CP 440: Limited by number of slots; CP 441: Limited by number of slots and number of connections |
| 14; In total max. 10 CPs as DP master and PROFINET controller, of which up to 10 IMs or CPs as DP master and up to 4 CPs as PROFINET controller |
Slots | |
| 2 |
Time of day | |
Clock | |
| Yes |
| Yes |
| 1 ms |
| 1.7 s; Power off |
| 8.6 s; For power On |
Operating hours counter | |
| 16 |
| 0 to 15 |
| SFCs 2, 3 and 4: 0 to 32767 hours SFC 101: 0 to 2^31 - 1 hours |
| 1 hour |
| Yes |
Clock synchronization | |
| Yes |
| Yes |
| Yes |
| Yes |
| Yes |
| Yes |
| Yes |
| Yes; As client |
| Yes |
Time difference in system when synchronizing via | |
| 10 ms |
| 200 ms |
Interfaces | |
Interfaces/bus type | 1 x MPI/PROFIBUS DP, 1 x PROFINET (2 ports), 1 x PROFIBUS DP (optionally pluggable) |
Number of RS 485 interfaces | 1; Combined MPI / PROFIBUS DP |
Number of other interfaces | 1; PROFIBUS DP with IF 964-DP (plug-in option; MLFB: 6ES7964-2AA04-0AB0) |
1. Interface | |
Interface type | Integrated |
Physics | RS 485 / PROFIBUS + MPI |
Isolated | Yes |
Power supply to interface (15 to 30 V DC), max. | 150 mA |
Number of connection resources | MPI: 32, DP: 16 |
Functionality | |
| Yes |
| Yes |
| Yes |
MPI | |
| 32; If a diagnostics repeater is used on the line, the number of connection resources on the line is reduced by 1 |
| 12 Mbit/s |
Services | |
| Yes |
| Yes |
| Yes |
| Yes |
| Yes |
| Yes |
| Yes |
DP master | |
| 16; If a diagnostics repeater is used on the line, the number of connection resources on the line is reduced by 1 |
| 12 Mbit/s |
| 32 |
Services | |
| Yes |
| Yes; S7 routing |
| No |
| Yes |
| Yes |
| Yes |
| Yes |
| Yes |
| Yes |
| Yes |
| Yes |
| Yes |
| Yes |
Address area | |
| 2 kbyte |
| 2 kbyte |
User data per DP slave | |
| 244 byte |
| 244 byte |
| 244 byte |
| 244 |
| 128 byte |
DP slave | |
| 16 |
| http://support.automation.siemens.com/WW/view/en/113652 |
| 12 Mbit/s |
| No |
| 32; Virtual slots |
| 32 byte |
| 32 byte |
Services | |
| Yes; with interface active |
| Yes; with interface active |
| No |
| No |
| Yes |
| Yes |
| Yes |
| No |
| No |
Transfer memory | |
| 244 byte |
| 244 byte |
2. Interface | |
Interface type | PROFINET |
Physics | Ethernet RJ45 |
Isolated | Yes |
automatic detection of transmission rate | Yes; Autosensing |
Autonegotiation | Yes |
Autocrossing | Yes |
Change of IP address at runtime, supported | Yes; Assignment by higher-level IO-Controller or by the user program with SFB104 "IP_CONF" |
Number of connection resources | 64 |
Interface types | |
| 2 |
| Yes |
Media redundancy | |
| Yes |
| 200 ms |
| 50 |
Functionality | |
| Yes |
| Yes |
| Yes |
| No |
| No |
| Yes |
| Yes |
| 5 |
| No |
PROFINET IO Controller | |
| 100 Mbit/s |
Services | |
| Yes |
| Yes |
| Yes |
| Yes; Only with IRT and the High Performance option |
| Yes |
| Yes |
| Yes |
| 32 |
| 256 |
| 64 |
| 64 |
| 256 |
| 61 |
| 256 |
| 256 |
| Yes |
| 8 |
| Yes |
| 8; 8 parallel calls of the SFC 12 "D_ACT_DP" possible per line. Max. 32 IO Devices changing during operation (partner ports) are supported |
| Yes |
| 250 μs, 500 μs, 1 ms, 2 ms, 4 ms additionally with IRT with high performance: 250 µs to 4 ms in 125 µs frame |
| 250 µs to 512 ms; minimum value depends on preset communication share for PROFINET IO, on the number of IO Devices and on the amount of configured user data, see PROFINET system description |
Address area | |
| 8 kbyte |
| 8 kbyte |
| 1 024 byte |
PROFINET IO Device | |
Services | |
| Yes |
| Yes |
| Yes |
| No |
| Yes |
| Yes |
| Yes |
| Yes |
| 2 |
Transfer memory | |
| 1 440 byte; Per IO Controller with shared device |
| 1 440 byte; Per IO Controller with shared device |
Submodules | |
| 64 |
| 1 024 byte |
PROFINET CBA | |
| Yes |
| Yes |
Open IE communication | |
| 62 |
| 0, 20, 21, 25, 80, 102, 135, 161, 34962, 34963, 34964, 65532, 65533, 65534, 65535 |
| Yes |
3. Interface | |
Interface type | Pluggable interface module (IF) |
Plug-in interface modules | IF 964-DP (MLFB: 6ES7964-2AA04-0AB0) |
Physics | RS 485 / PROFIBUS |
Isolated | Yes |
Power supply to interface (15 to 30 V DC), max. | 150 mA |
automatic detection of transmission rate | No |
Number of connection resources | 16 |
Functionality | |
| No |
| Yes |
| Yes |
DP master | |
Services | |
| Yes |
| Yes; S7 routing |
| No |
| Yes |
| Yes |
| Yes |
| Yes |
| Yes |
| Yes |
| Yes |
| Yes |
| Yes |
| Yes |
| Yes |
Address area | |
| 6 kbyte |
| 6 kbyte |
User data per DP slave | |
| 244 byte |
| 244 byte |
| 244 byte |
| 244 |
| 128 byte |