详细介绍
西门子6ES7231-5QF32-0XB0
西门子 S7-1200 I/O模块
信号模块和通讯模块具有大量可供选择的信号板,可量身定做控制器系统以满足需求,而不必增加其体积。
西门子 S7-1200 CPU
西门子 S7-1200 系统的CPU 有三种不同型号:CPU 1211C,CPU 1212C 和CPU1214C。
强大的工艺功能
西门子 S7-1200将强大的工艺功能集于一身。由于集成了计数和测量,闭环控制和运动控制的工艺,西门子S7-1200的功能面面俱到,可用于多种自动化任务。
SIEMENS可编程控制器西门子SIMATIC S7-1200 主要规格
CPU1215C CPU1214C CPU1212C CPU1211C SM1221 SM1222 SM1223
SM1231 SM1232 SM1234 CSM1277 CM1241 CM1242 CM1243
SB1223 SB1222 SB1221 SB1231 SB1232 SIM1274
上海晋营自动化科技有限公司
:乔 静
电 话:(同号)
邮 箱:3548508227
:3548508227
紧凑的高性能CPU1215C,带有24点集成输入/输出。可通过以下方式扩展:1个信号板 (SB) 或通信板 (CB);8个信号模块 (SM);zui多3个通信模块 (CM)。运算种类众多,便于编程:基本操作,如二进制逻辑运算、结果赋值、存储、计数、产生时间、装载、传输、比较、移位、循环移位、产生补码、调用子程序(带局部变量)。集成通信命令(例如,USS 协议、Modbus RTU、S7 通信“T-Send/T-Receive”(T 发送/T 接收)或自由端口模式 (Freeport))。
中央处理单元
西门子6ES7231-5QF32-0XB0
标准 CPU
CPU 1211C
CPU 1212C
CPU 1214C
CPU 1215C
SIPLUS 标准 CPU 电 话:(同号)
信号模块
数字量模块
SM 1221 数字量输入模块
SB 1221 数字量输入模块
SM 1222 数字量输出模块
SB 1222 数字量输出模块
SM 1223 数字量输入/输出模块
SB 1223 数字量输入/输出模块
信号模块 (扩展温度范围)
数字量输入模块 SIPLUS SM 1221 信号模块
数字量输出模块 SIPLUS SM 1222 信号模块
数字量输入/输出模块 SIPLUS SM 1223 信号模块
SIPLUS SB 1223 信号板
模拟量模块
SM 1231 模拟量输入模块
SB 1231 模拟量输入模块
SM 1232 模拟量输出模块
SB 1232 模拟量输出模块
SM 1234 模拟量输入/输出模块
SM 1231 热电偶模块
SB 1231 热电偶信号板
SM 1231 RTD 信号模块
SB 1231 RTD 信号板
SIPLUS 模拟量模块
模拟量输入模块 SIPLUS SM 1231 信号模块
模拟量输出模块 SIPLUS SM 1232 信号模块
模拟量输入/输出模块 SIPLUS SM 1234 信号模块
SIPLUS SB 1232 信号板
SIPLUS 型号
特殊模块
SIM 1274 仿真器
电池板 BB 1297
通讯
CM 1241 通讯模块
CB 1241 通信板 RS485
CM 1242-5
CM 1243-2
CM 1243-5
CSM 1277 非网管型
CP 1242-7 GPRS module
通讯
CM 1241 通讯模块 (扩展温度范围)
电源
1-phase, 24 V DC/2.5 A (PM 1207)
SIPLUS 电源模块
SIPLUS PM 1207 电源
操作员监控
精简面板 - 标准
SIPLUS 基本面板
软件
STEP 7 Basic
STEP 7 (TIA Portal)
S7-1500
中央处理单元
标准 CPU
信号模块
工艺模块
通信模块
连接系统
电源
附件
CPU1211C AC/DC/Rly,6输入/4输出,集成2AI
CPU1211C DC/DC/DC,6输入/4输出,集成2AI
CPU1211C DC/DC/Rly,6输入/4输出,集成2AI
CPU1212C AC/DC/Rly,8输入/6输出,集成2AI
CPU1212C DC/DC/DC,8输入/6输出,集成2AI
CPU1212C DC/DC/Rly,8输入/6输出,集成2AI
CPU1214C AC/DC/Rly,14输入/10输出,集成2AI
CPU1214C DC/DC/DC,14输入/10输出,集成2AI
CPU1214C DC/DC/Rly,14输入/10输出,集成2AI
CPU1215C AC/DC/Rly,14输入/10输出,集成2AI/2AO
CPU1215C DC/DC/DC,14输入/10输出,集成2AI/2AO
CPU1215C DC/DC/Rly,14输入/10输出,集成2AI/2AO
CPU1211C AC/DC/Rly,6输入/4输出,集成2AI
CPU1211C DC/DC/DC,6输入/4输出,集成2AI
CPU1211C DC/DC/Rly,6输入/4输出,集成2AI
CPU1212C AC/DC/Rly,8输入/6输出,集成2AI
CPU1212C DC/DC/DC,8输入/6输出,集成2AI
CPU1212C DC/DC/Rly,8输入/6输出,集成2AI
CPU1214C AC/DC/Rly,14输入/10输出,集成2AI
CPU1214C DC/DC/DC,14输入/10输出,集成2AI
CPU1214C DC/DC/Rly,14输入/10输出,集成2AI
CPU1215C AC/DC/Rly,14输入/10输出,集成2AI/2AO
CPU1215C DC/DC/DC,14输入/10输出,集成2AI/2AO
CPU1215C DC/DC/Rly,14输入/10输出,集成2AI/2AO
CPU1217C DC/DC/DC,14输入/10输出,集成2AI/2AO
SM1221数字量输入模块, 8 输入24V DC
SM1221数字量输入模块, 16 输入24V DC
SM1222数字量输出模块, 8输出继电器
SM1222数字量输出模块, 8输出24V DC
SM1222数字量输出模块, 8输出切换继电器
SM1222数字量输出模块, 16输出继电器
ing the gear unit from the front.
- a door weight of 300 kg or more
Rubber-metal anti-vibration mount 6FB1104‑0AT02‑0AD0
Rubber-metal anti-vibration mount 6FB1104‑0AT01‑0AD0
Mounting brackets
Two different mounting brackets are available with elongated holes:
- Mounting bracket 6FB1104‑0AT01‑0AS0 for the geared motors for flexible accommodation of the rubber-bonded metal
- Mounting bracket 6FB1104‑0AT02‑0AS0 for the deflector unit for setting the toothed belt to the required belt tension
Mounting bracket 6FB1104‑0AT01‑0AS0 for mounting the geared motor
Mounting bracket 6FB1104‑0AT02‑0AS0 for the deflector unit
Door clutch holder
The door clutch holder serves to connect the respective door leaf by means of a toothed belt while also functioning as a toothed-belt lock. One door clutch holder per door leaf is required. The toothed-belt lock can accommodate both open ends of the toothed belt.
A door clutch holder is available for each toothed belt width:
- Width 12 mm: 6FB1104‑0AT01‑0CP0
- Width 14 mm: 6FB1104‑0AT02‑0CP0
Door clutch holder 6FB1104‑0AT01‑0CP0 (packaging size = 1 unit)
Deflector unit
The deflector unit 6FB1104‑0AT03‑0AS0 contains an embedded belt pulley which can be mounted on the door system.
The STS toothed belt is redirected via this deflector unit.
Deflector unit 6FB1104‑0AT03‑0AS0
STS toothed belt
The door system is moved between the end positions of the door using the STS toothed belts. Two different toothed belt lengths can be ordered for each toothed belt width.
Toothed belt width 12 mm:
- Length 4 m: 6FB1104‑0AT01‑0AB0
- Length 45 m: 6FB1104‑0AT02‑0AB0
Toothed belt width 14 mm:
- Length 4 m: 6FB1104‑0AT03‑0AB0
- Length 55 m: 6FB1104‑0AT04‑0AB0
Toothed belt 6FB1104‑0AT01‑0AB0, length 4 m
Toothed belt 6FB1104‑0AT02‑0AB0, length 45 m
A range of accessories is available for SIDOOR elevator door systems with EC technology:
Motor holder 6FB1104-0AT03-0AD0 for accommodation of the SIDOOR MED280 direct drive.
Mounting bracket:
- For mounting the SIDOOR motor holder 6FB1104-0AT01-0AS0
- With tensioning device for mounting the deflector unit and setting the toothed belt to the required tension (large) 6FB1104-0AT05-0AS4
SIDOOR mounting bracket, large
- With tensioning device for mounting the deflector unit and setting the toothed belt to the required tension (small) 6FB1104-0AT05-0AS5
SIDOOR mounting bracket, small
Door clutch holder
- For attaching both ends of the toothed belt and connecting the respective door panel to the toothed belt,
width 20 mm 6FB1104-0AT05-0AS1
SIDOOR door clutch holder
Deflector unit:
For attaching the SIDOOR toothed belt and fixing to the door 6FB1104-0AT07-0AS0
SIDOOR deflector unit
STD toothed belt
As a connection between the door system and the end positions of the door
Toothed belt width 20 mm. Length 4 m 6FB1104-0AT05-0AB0
SIDOOR toothed belt, small
Toothed belt width 20 mm. Length 45 m 6FB1104-0AT06-0AB1
SIDOOR toothed belt, large
概述
信令模块和 SITOP modular (6EP1 .3.-3BA00) 稳压电源一起可以提供关于电源运行状态的消息信号,还可用于电源的远程 ON/OFF 切换;接触由电源自动完成。
订货号 | 6EP1 961-3BA101) |
输入/输出 | |
额定电压 Uinrated | - |
电压范围 | - |
控制输入 | 非浮动输入,用于对于电源 ON/OFF 切换。 |
额定输出电压 Vout rated | - |
额定电流 I输出额定 | - |
电源缓冲 | - |
zui长缓冲时间 | - |
保护和监控 | |
静态电流限制 | - |
短路保护 | - |
发送信号/警报信号 | |
状态显示 | - |
发信号 | 浮动继电器触点(转换触点,额定值 6 A/240 V AC),用于"Output voltage OK(输出电压正常)"和 "Power supply availability OK(电源正常)" |
安全 | |
电隔离 | √,安全超低电压安全符合 EN 60950-1(继电器触点) |
安全等级 | Class I |
安全性测试 | √ |
CE 标记 | √ |
UL/cUL (CSA) 认证 | UL 认证 (UL 508) File E197259, CSA (CSA C22.2 No. 14, CSA C22.2 No. 107.1) |
防爆 | - |
防护等级 (EN 60529) | IP20 |
EMC | |
辐射干扰 | EN 55022 Class B |
抗扰度 | EN 61000-6-2 |
运行数据 | |
环境温度范围 | 0 ... +60 °C 自然对流 |
运输和存储温度 | -40 ... +85 °C |
湿度等级 | 气候等级为 3K3,符合 EN 60721 规范,无冷凝 |
机械机构 | |
连接 | 螺钉型接线端子,0.14 ...2.5 mm2 |
外形尺寸(宽 x 高 x 深),[mm] | 26 x 125 x 116 |
重量,约 | 0.15 kg |
安装 | 直接卡装到基本装置 (6EP1 .3.-3BA00) 的一侧 |
1)SIPLUS 模板 6AG1 961-3BA10-7AA0,用于扩展温度范围 -25℃ 至 +70℃ 以及用于介质负载(例如氯/硫环境)。配有硬质镀金触点的 6AG1 961-3BA10-6AA0。