通信电缆 网络设备 无线通信 云计算|大数据 显示设备 存储设备 网络辅助设备 信号传输处理 多媒体设备 广播系统 智慧城市管理系统
上海盛霞光电科技有限公司
FUEHLERSYSTEME传感器DMU/AFUEHLERSYSTEMEDMU/A用于压差和体积流量的压力传感器
FUEHLERSYSTEME DMU/A用于压差和体积流量的压力传感器,有源输出(0-10 V 或 4-20 mA)
-5000 ... + 5000 Pa,0-200,000 立方米/小时
每个版本 8 个测量范围
0-10 V,4-20 mA,继电器
输出衰减 0 秒 / 1 秒 / 5 秒 / 10 秒 通过 DIP 开关可选择
铰链锁技术
压力变送器检测两个压力输入之间的过压、欠压或压差 (P),并将测量值转换为 0-10 V 或 4-20 mA 的线性输出信号。可以在设备上设置 8 种不同的比例和压力变送器的输出阻尼(0 秒/1 秒/5 秒/10 秒)。
或者,测量装置可以作为体积流量测量装置运行。它使用系统特定的 K 系数 (k) 计算体积流量 (Q) 并将计算值输出为线性输出信号 0-10 V 或 4-20 mA。 K 系数、体积流量输出信号 0-10 V 或 4-20 mA 的所需标度、介质密度和所需体积单位(l 或 m³ per s / min / h)可以通过以下方式方便地设置显示菜单。
背光显示的内容可以通过菜单和实际值、设置的切换阈值、继电器状态、所选间隔(1 h / 6 h / 12 h / 24 h) 等可以读取。为了现场手动校准零点,压力变送器只需按一下按钮即可进行零点调整。如有必要,可以使用 SPAN 控制器在现场对压力变送器进行精细校准。
型号:Commodity Group 5
SKUPressureVolume flowOutput pressureVersionPrice € net / gross * AvailabilityQtyAction
DMU/A-I/V10...+/-500 Pa-4-20 mAwithout display
€160.36 €190.83
Availability
0
Add to CartDelivery Time
DMU/A-I/V20...+/-5000 Pa-4-20 mAwithout display
€160.36 €190.83
Availability
0
Add to CartDelivery Time
DMU/A-ID/V10...+/-500 Pa0-65.000 m³/h 4-20 mAwith display
€215.28 €256.18
Availability
0
Add to CartDelivery Time
DMU/A-ID/V20...+/-5000 Pa0-200.000 m³/h 4-20 mAwith display
€215.28 €256.18
Availability
0
Add to CartDelivery Time
DMU/A-IR/V10...+/-500 Pa-4-20 mA, changerwithout display
€171.34 €203.89
Availability
0
Add to CartDelivery Time
DMU/A-IR/V20...+/-5000 Pa-4-20 mA, changerwithout display
€171.34 €203.89
Availability
0
Add to CartDelivery Time
DMU/A-IRD/V10...+/-500 Pa0-65.000 m³/h 4-20 mA, changerwith display
€226.26 €269.25
Availability
0
Add to CartDelivery Time
DMU/A-IRD/V20...+/-5000 Pa0-200.000 m³/h 4-20 mA, changerwith display
€226.26 €269.25
Availability
0
Add to CartDelivery Time
DMU/A-U/V10...+/-500 Pa-0-10 Vwithout display
€160.36 €190.83
Availability
0
Add to CartDelivery Time
DMU/A-U/V20...+/-5000 Pa-0-10 Vwithout display
€160.36 €190.83
Availability
0
Add to CartDelivery Time
DMU/A-U/V30...+/-100 Pa-0-10 Vwithout display
€226.26 €269.25
Availability
0
Add to CartDelivery Time
DMU/A-UD/V10...+/-500 Pa0-65.000 m³/h 0-10 Vwith display
€215.28 €256.18
Availability
0
Add to CartDelivery Time
DMU/A-UD/V20...+/-5000 Pa0-200.000 m³/h 0-10 Vwith display
€215.28 €256.18
Availability
0
Add to CartDelivery Time
DMU/A-UD/V30...+/-100 Pa0-30.000 m³/h 0-10 Vwith display
€281.18 €334.60
Availability
0
Add to CartDelivery Time
DMU/A-UR/V10...+/-500 Pa-0-10 V, changerwithout display
€171.34 €203.89
Availability
0
Add to CartDelivery Time
DMU/A-UR/V20...+/-5000 Pa-0-10 V, changerwithout display
€171.34 €203.89
Availability
0
Add to CartDelivery Time
DMU/A-UR/V30...+/-100 Pa-0-10 V, changerwithout display
€237.24 €282.32
Availability
0
Add to CartDelivery Time
DMU/A-URD/V10...+/-500 Pa0-65.000 m³/h 0-10 V, changerwith display
€226.26 €269.25
Availability
0
Add to CartDelivery Time
DMU/A-URD/V20...+/-5000 Pa0-200.000 m³/h 0-10 V, changerwith display
€226.26 €269.25
Availability
0
Add to CartDelivery Time
DMU/A-URD/V30...+/-100 Pa0-30.000 m³/h 0-10 V, changerwith display
€292.17 €347.68
Pressure typepositive, negative or differential pressure
Mediumair, non-aggressive, non-flammable, non-condensing gases
Measurement range pressureV1: 0...+/-500 Pa, V2: 0...+/-5000 Pa, V3: 0...+/-100 Pa
Measurement range volume flow (calculated)V1: 0-65.000 m³/h, V2: 0-200.000 m³/h, V3: 0-30.000 m³/h
ScalesV1: 0...+/-100, 0...+/-200 Pa, 0...+/-300 Pa, 0...+/-500 Pa; V2: 0...+/-1000, 0...+/-2000 Pa, 0...+/-3000 Pa, 0...+/-5000 Pa; V3: 0...+/-25, 0...+/-50 Pa, 0...+/-75 Pa, 0...+/-100 Pa
Accuracy±3,0% FS (at 20°C)
Temperature dependency±2,5% FS / 10 K
Linearity inaccuracy±1,0% final value
Long term stability±1% FS/year
Zero-point adjustmentmax. +2% final value
Offset±5% from the selected scale by 270° potentiometer
Reaction rate< 1 s, at 5% alteration relating to final value
Output attentuation0 s / 1 s / 5 s / 10 s selectable by DIP switch
Sensor protectionmounted inside housing
Running-in time< 30 min at initial operation because of tempering
Supply voltage analog 0-10 V24 V AC/DC (±5%)
Supply voltage analog 4-20 mA15...36 V DC (Ubmin = 15 V + RLoad*0,02A)
Current consumption at 0-10 Vtyp. 15 mA, 30 mA peak current consumption for 50 ms at switching moment at option relay
Current consumption at 4-20 mAmax. 20 mA / output, 40 mA peak current consumption for 50 ms at switching moment at option relay
Analogue output 0-10 V3-wire connection, min. load resistance 100 kOhm
Analogue output 4-20 mA2-wire connection (transmitter), max. RLoad(Ohm) = (+Ub - 15 V) / 0,02 A
Alarm output1 x potential-free change-over contact, 48 V, 1 A
Switching Hysteresis Relay2% of the selected scaling (without display), 0,5...5% of the selected scaling adjustable (with display)
Electrical connectionscrew terminals max. 1,5 mm²
Pressure resistance5-times of measurement range
HousingPolycarbonate PC UL 94 V0 with hinge locks, color signal white similar to RAL 9003
DimensionsHousing: L 89 x W 80 x H 47 mm
Cable glandPG11 high-strength cable gland with strain relief
Displayoptional LCD display with backlight on/off/auto
Protection typeIP65, IP20 if pressure connection port is open
Protection classIII
Working range r.H.0...98% r.H. in contaminant-free, non-condensing air
Working temperature0...+50°C
Storage temperature0...+50°C
InstallationHousing: screw fastening, Pressure connection: 2 plastic duct connecting nipple with fastening screws and 2 m PVC tube Ø 6 mm (in scope of delivery)
Manual zero-point adjustmentThe zero point adjustment is started by pressing the button on the circuit board (push 10 s until LED stops flashing or by the display version the countdown 10-0 is completed). Before, a continuous operation of at least 1 hour must be sure, the offset must be in the middle position and the pressure inputs P+ and P- must be an obvious offense to the environment. The successful calibration will be signalized by 5 sec durable lightning of the LED.
ApprovalsCE, EAC, RoHS
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
智慧城市网 设计制作,未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
请输入你感兴趣的产品
请简单描述您的需求
请选择省份