通信电缆 网络设备 无线通信 云计算|大数据 显示设备 存储设备 网络辅助设备 信号传输处理 多媒体设备 广播系统 智慧城市管理系统 其它智慧基建产品
上海勇控自动化设备有限公司
上海勇控自动化设备有限公司
BECKHOFF工控机CX5010/CX5020
上海勇控自动化设备主营PILZ皮尔兹安全继电器，BECKHOFF倍福模块，SICK，HUBNER编码器，公司驻德国有办事处，一手货源，*，选购。：文，：，，:
The CX5010 and CX5020 are Embedded PCs from the CX5000 series based on In® Atom™ processors and differ only by the CPU version. The CX5010 has a 1.1 GHz In® Atom™ Z510 processor, while the CX5020 has a 1.6 GHz In® Atom™ Z530 processor. Apart from the clock speed, the two processors also differ by the fact that the Z530 features hyperthreading technology, i.e. it has two virtual CPU cores for more effective execution of software.
Depending on the installed TwinCAT runtime environment, the CX5010/CX5020 can be used for the implementation of PLC or PLC/Motion Control projects (with or without visualisation).
The extended operating temperature range between -25 and +60 °C enables application in climatically demanding situations.
The order identifier of the CX5000 devices is derived as follows:
| Technical data | CX5010-x1xx | CX5020-x1xx |
|---|---|---|
| Processor | processor In® Atom™ Z510, 1.1 GHz clock frequency (TC3: 40) | processor In® Atom™ Z530, 1.6 GHz clock frequency (TC3: 40) |
| Flash memory | 128 MB Compact Flash card (optionally extendable) | |
| Internal main memory | 512 MB RAM (internal, not expandable) | 512 MB RAM (optionally 1 GB installed ex factory) |
| Persistent memory | integrated 1-second UPS (1 MB on Compact Flash card) | |
| Interfaces | 2 x RJ45, 10/100/1000 Mbit/s, DVI-D, 4 x USB 2.0, 1 x optional interface | |
| Diagnostics LED | 1 x power, 1 x TC status, 1 x flash access, 2 x bus status | |
| Clock | internal battery-backed clock for time and date (battery exchangeable) | |
| Operating system | Microsoft Windows Embedded CE 6 or Microsoft Windows Embedded Standard 2009 | |
| Control software | TwinCAT 2 PLC runtime or TwinCAT 2 NC PTP runtime | |
| I/O connection | E-bus or K-bus, automatic recognition | |
| Power supply | 24 V DC (-15 %/+20 %) | |
| Current supply E-bus/K-bus | 2 A | |
| Max. power loss | 12 W (including the system interfaces) | 12.5 W (including the system interfaces) |
| Dimensions (W x H x D) | 100 mm x 106 mm x 92 mm | |
| Weight | approx. 575 g | |
| Operating/storage temperature | -25…+60 °C/-40…+85 °C | |
| Relative humidity | 95 %, no condensation | |
| Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 | |
| EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 | |
| Protection class | IP 20 | |
| TC3 performance class | performance (40); please see here for an overview of all the TwinCAT 3 performance classes | |
| Ordering information | E- bus | K- bus | no operating system | Windows Embedded CE 6 | Windows Embedded Standard 2009 | optional TwinCAT 3 | TwinCAT 2 PLC runtime | TwinCAT 2 NC PTP runtime |
|---|---|---|---|---|---|---|---|---|
| CX5010-0100 | x | – | x | – | – | – | – | – |
| CX5010-0110 | x | – | – | x | – | x | – | – |
| CX5010-0111 | x | – | – | x | – | – | x | – |
| CX5010-0112 | x | – | – | x | – | – | x | x |
| CX5010-0120 | x | – | – | – | x* | x | – | – |
| CX5010-0121 | x | – | – | – | x* | – | x | – |
| CX5010-0122 | x | – | – | – | x* | – | x | x |
| CX5010-1100 | – | x | x | – | – | – | – | – |
| CX5010-1110 | – | x | – | x | – | x | – | – |
| CX5010-1111 | – | x | – | x | – | – | x | – |
| CX5010-1112 | – | x | – | x | – | – | x | x |
| CX5010-1120 | – | x | – | – | x* | x | – | – |
| CX5010-1121 | – | x | – | – | x* | – | x | – |
| CX5010-1122 | – | x | – | – | x* | – | x | x |
| CX5020-0100 | x | – | x | – | – | – | – | – |
| CX5020-0110 | x | – | – | x | – | x | – | – |
| CX5020-0111 | x | – | – | x | – | – | x | – |
| CX5020-0112 | x | – | – | x | – | – | x | x |
| CX5020-0120 | x | – | – | – | x* | x | – | – |
| CX5020-0121 | x | – | – | – | x* | – | x | – |
| CX5020-0122 | x | – | – | – | x* | – | x | x |
| CX5020-1100 | – | x | x | – | – | – | – | – |
| CX5020-1110 | – | x | – | x | – | x | – | – |
| CX5020-1111 | – | x | – | x | – | – | x | – |
| CX5020-1112 | – | x | – | x | – | – | x | x |
| CX5020-1120 | – | x | – | – | x* | x | – | – |
| CX5020-1121 | – | x | – | – | x* | – | x | – |
| CX5020-1122 | – | x | – | – | x* | – | x | x |
| Accessories | |
|---|---|
| CX1900-0204 | 1 GB DDR2 RAM for CX5020, instead of 512 MB DDR2 RAM; pre-assembled ex factory |
| CX1800-0400 | Windows Embedded Standard 7 E instead of Windows Embedded Standard 2009; requires at least 1 GB RAM and 8 GB Compact Flash; supported devices: CX5020 |
| CX1800-0401 | Windows Embedded Standard 7 P 32 bit instead of Windows Embedded Standard 2009; requires at least 1 GB RAM and 8 GB Compact Flash; supported devices: CX5020 |
| CX1900-00xx | Optionally expandable memory ex factory. Instead of 128 MB Compact Flash card: 1, 2, 4 and 8 GB Compact Flash card |
| CX1900-00xx | Aditionally expandable memory: 1, 2, 4 and 8 GB Compact Flash card |
| CX1900-001x | Formatting a Compact Flash card (bootable) |
| Optional interfaces | |
|---|---|
| CX5010-N020 | audio interface, 3 x 3.5 mm jack sockets, Line In, Mic In, Line Out or 5.1 Surround |
| CX5010-N030 | RS232 interface, D-sub plug, 9-pin |
| CX5010-N031 | RS485 interface, D-sub socket, 9-pin, configuration as an end point, without echo, termination on |
| CX5010-N031-0001 | RS485 interface, D-sub socket, 9-pin, configuration as an end point, with echo, termination on |
| CX5010-N031-0002 | RS485 interface, D-sub socket, 9-pin, configuration as drop point, without echo, termination off |
| CX5010-N031-0003 | RS485 interface, D-sub socket, 9-pin, configuration as drop point, with echo, termination off |
| CX5010-N031-0004 | RS422 interface, D-sub socket, 9-pin, configuration as full duplex end point, termination on |
| CX5010-B110 | EtherCAT slave interface, EtherCAT IN and OUT (2 x RJ45) |
| CX5010-M310 | PROFIBUS master interface, D-sub socket, 9-pin |
| CX5010-B310 | PROFIBUS slave interface, D-sub socket, 9-pin |
| CX5010-M510 | CANopen master interface, D-sub plug, 9-pin |
| CX5010-B510 | CANopen slave interface, D-sub plug, 9-pin |
| CX5010-M930 | PROFINET RT, controller interface, Ethernet (2 x RJ45) |
| CX5010-B930 | PROFINET RT, device interface, Ethernet (2 x RJ45 switched) |
| CX5010-B950 | EtherNet/IP slave interface, Ethernet (2 x RJ45 switched) |
| CX5020-N020 | audio interface, 3 x 3.5 mm jack sockets, Line In, Mic In, Line Out or 5.1 Surround |
| CX5020-N030 | RS232 interface, D-sub plug, 9-pin |
| CX5020-N031 | RS485 interface, D-sub socket, 9-pin, configuration as an end point, without echo, termination on |
| CX5020-N031-0001 | RS485 interface, D-sub socket, 9-pin, configuration as an end point, with echo, termination on |
| CX5020-N031-0002 | RS485 interface, D-sub socket, 9-pin, configuration as drop point, without echo, termination off |
| CX5020-N031-0003 | RS485 interface, D-sub socket, 9-pin, configuration as drop point, with echo, termination off |
| CX5020-N031-0004 | RS422 interface, D-sub socket, 9-pin, configuration as full duplex end point, termination on |
| CX5020-B110 | EtherCAT slave interface, EtherCAT IN and OUT (2 x RJ45) |
| CX5020-M310 | PROFIBUS master interface, D-sub socket, 9-pin |
| CX5020-B310 | PROFIBUS slave interface, D-sub socket, 9-pin |
| CX5020-M510 | CANopen master interface, D-sub plug, 9-pin |
| CX5020-B510 | CANopen slave interface, D-sub plug, 9-pin |
| CX5020-M930 | PROFINET RT, controller interface, Ethernet (2 x RJ45) |
| CX5020-B930 | PROFINET RT, device interface, Ethernet (2 x RJ45 switched) |
| CX5020-B950 | EtherNet/IP slave interface, Ethernet (2 x RJ45 switched) |
Product announcement | CX50x0-B950: estimated market release 1st quarter 2016 |
Beckhoff 嵌入式 PC
BECKHOFF工控机CX5010/CX5020 BECKHOFF工控机CX5010/CX5020
模块化安装于 DIN 导轨的工业 PC
随着 CX 系列嵌入式 PC 的推出，Beckhoff 将 PC 技术和 I/O 级模块化技术相结合，构成一种可以安装于控制柜中的 DIN 导轨单元。该设备系列结合了工业 PC 和硬件 PLC 环境，适用于中等规模的控制任务。可以根据现有任务对模块化控制系统进行配置，并将其安装在控制柜或端子盒中。
CX 系统在价格和性能上涵盖了 Beckhoff的所有控制技术。该产品系列是为那些需要有工业 PC 的特性和计算能力，但由于项目预算有限又不打算购买全套工业 PC 机的客户而设计。配置该系统时，用户只需订购实际所需的组件。例如，CX 能够在“无头”模式中运行，即无显示器和键盘；这种情况下，就无需配置相关的接口。
可升级的性能等级
CX 系列产品有多种可选的基本 CPU 模块，分别配备有不同的处理器，可以满足各个控制任务的需求：
CX1030: 带 In® Pentium® M CPU，1.8 GHz 处理器的高性能 CX
CX1020: 带 In® Celeron® M ULV CPU 和 1 GHz 处理器的高性能 CX
CX1010: 带 Pentium® MMX-compatible CPU 和 500 MHz 处理器的基本CX
CX9010: 带 In® IXP420 XScale® 技术和 533 MHz 处理器的以太网控制器器
CX9000: 带 In® IXP420 XScale® 技术和 266 MH z处理器的以太网控制器
除了多种型号的 CPU 之外，不同 CX型号的系统接口模块和电源模块也不同。通过相应的 I/O接口，CX1030、CX1020、CX1010、CX9000 和 CX9010 既可连接 Beckhoff 总线端子模块，也可以连接 EtherCAT 端子模块作为 I/O 系统。
组件
CX 系列的系统模块通过标准的 PC/104 总线（16 位）相互连接。每个系统组件都由宽度为 19 毫米（单模）或 38 毫米（双模）的单个模块构成，这些模块可以依次连接。CX1030、CX1020 和CX1010 的基本单元包括 CPU 模块和电源模块。CX9000 和 CX9010 系列则将 CPU 和电源集成于一体。根据 CX 型号的不同，控制器可通过更多的系统接口加以扩展。用于 PROFIBUS、CANopen、DeviceNet、SERCOS interface 和 Lightbus 的现场总线接口扩充了可选模块的种类，其中又分主站和从站接口。
软件
结合 TwinCAT 自动化软件，CX 嵌入式 PC 成为一个功能强大的 IEC61131-3 PLC，它还可以操控运动控制任务。根据所需的周期时间不同，它可以控制多个伺服轴。CX1010、CX1020或 CX1030 甚至还可以实现特殊的功能，比如“飞锯”、“电子齿轮箱”或“电子凸轮”等。CX 因而成为一个用单个硬件实现 PLC、运动控制和可视化任务的控制器。在 Windows CE 平台下，借助于操作系统的实时能力，以高级语言编写的用户任务可以在 TwinCAT 运行的情况下实时得到处理。
应用范围广
由于工业 PC良好的设计和优异的功能，嵌入式 PC 可以得到广泛应用。现有的应用包括机械制造（自动化锯床、自动装配机、切纸机、旋凿控制、包装机、金属板材加工、物流输送设备）、过程工艺（水处理、发电、能耗监测）、楼宇控制（寓所控制、门禁控制）等等。
自动化标准
T采用 Beckhoff 总线端子后，可把控制柜和安装端子的端子盒设计得更加经济。通过采用 4 线制端子系统，各种信号的传感器和执行机构都可以直接连接，而无需其它连接系统。现场设备无需像以往那样在控制柜（或端子盒）与控制器之间作点对点的连接，这样可大大减少控制器的设计成本，节约空间、材料、工程量和资金。
现场设备可以通过 Beckhoff 总线端子系统在产生信号的现场进行连接，因此对 Beckhoff 总线端子的安装和布线就像标准端子排那样简易和紧凑。总线端子与控制器之间通过一个现场总线耦合器连接。
Beckhoff 总线端子已在许多领域得到了测试和验证，从机械制造到楼宇控制。采用 Beckhoff 总线端子，可使设计、基建、布线、调试安装以及对系统和设备的维护和维修变得更加经济。
PC 现场总线接口卡
基于 PCI 的 PC 现场总线接口卡适用于 Lightbus、PROFIBUS、CAN¬open、DeviceNet、SERCOS 接口和以太网系统，该系列总线接口卡进一步完善了 Beckhoff 现场总线组件产品，专为快速控制和实时任务（如驱动器位置控制）而开发，因而得到广泛的应用。为了适应不同的需求，接口卡都配有一个或两个现场总线通道。以太网接口卡 FC9004 总共有 4 个通道。若将这种功能强大的 PC 现场总线接口卡与 TwinCAT 软件 PLC 和 NC 结合起来，其功能优势是显而易见的。这种智能化 PCI 接口卡是在其自身的处理器上高效处理现场总线协议，因此也可用于其它应用场合。通过 DPRAM 接口可将过程映像传送到 PC 上。TwinCAT I/O 软件包可提供用于 Windows NT/2000/XP/Vista 的驱动程序和配置工具。用高级语言编写的程序采用的是 DLL（动态连接库），对 Visual Basic 应用程序则可提供 ActiveX 接口。带有 OPC 接口的应用程序可以通过 OPC 服务器访问过程数据和参数。
所有接口卡都“浓缩”了现场总线的专有技术，具有以下特点：
· 快速数据交换，循环时间短（例如 Lightbus 的循环时间为：< 50 μs）
· 过程数据通讯可任意传输、同步传输、延时传输或等时同步传输
· 功能强大的参数和诊断接口
· 对任何设备均可进行自由组态的总线管理
迷你 PCI 现场总线接口卡
新型迷你 PCI 接口卡适用于 PROFIBUS、CANopen、DeviceNet、SERCOS 接口和以太网总线，延伸了 Beckhoff 的 PC 现场总线接口卡产品范围。与 Beckhoff 标准的 PCI 接口卡一样，这种接口非常适用于快速控制器和实时任务。
新一代的 Beckhoff 工业 PC，包括控制柜 PC C69xx 和面板型PC CP62xx/CP66xx 设计都非常紧凑。每个设备都配有两个以太网端口，它们是用于以太网以及基于 EtherCAT 的控制应用场合的高性能工业 PC 的典型代表。工业 PC 可以随意通过迷你 PCI 接口卡或现场总线技术进行扩展。现场总线接口卡上不带总线接口，而是通过电缆引到设备的外壳上（视设备而定）。
工控机 CX系列
CX9000-0000 CX9000-0001
CX9001-0000 CX9001-0001
CX9001-0100 CX9001-0101
CX9000-1000 CX9000-1001
CX9001-1000 CX9001-1001
CX9001-1100 CX9001-1101
CX9010-0000 CX9010-0001
CX9010-0002 CX9010-0100
CX9010-0101 CX9010-0102
CX9010-1000 CX9010-1001
CX9010-1002 CX9010-1100
CX9010-1101 CX9010-1102
CX9010-N010 CX9010-N030
CX9010-N031 CX9010-A001
CX1000-0010 CX1000-0011
CX1000-0012 CX1000-0110
CX1000-0111 CX1000-0112
CX1001-0000 CX1001-0010
CX1001-0011 CX1001-0012
CX1001-0020 CX1001-0021
CX1001-0022 CX1001-0100
CX1001-0110 CX1001-0111
CX1001-0112 CX1001-0120
CX1001-0121 CX1001-0122
CX1000-N001 CX1000-N002
CX1000-N003 CX1000-N005
CX1010-0000 CX1010-0010
CX1010-0011 CX1010-0012
CX1010-0020 CX1010-0021
CX1010-0022 CX1010-0100
CX1010-0110 CX1010-0111
CX1010-0112 CX1010-0120
CX1010-0121 CX1010-0122
CX1010-N010 CX1010-N020
CX1010-N030 CX1010-N040
CX1010-N031 CX1010-N041
CX1010-N060 CX1010-A001
CX1020-0000 CX1020-0010
CX1020-0011 CX1020-0012
CX1020-0013 CX1020-0100
CX1020-0110 CX1020-0111
CX1020-0112 CX1020-0113
CX1020-0020 CX1020-0021
CX1020-0022 CX1020-0023
CX1020-0120 CX1020-0121
CX1020-0122 CX1020-0123
CX1020-N010 CX1020-N020
CX1020-N030 CX1020-N040
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
智慧城市网 设计制作，未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
