EP型无孔型背贴式橡胶止水带320x8规格@敦化
背贴式橡胶止水带 主要以天然橡胶与各种合成橡胶为主要原料，掺加各种助剂及填充料，经塑炼、混炼、压制成型，其品种规格较多，有桥型、山型、P型、U型、Z型、乙型、T型、H型、E型、Q型等。背贴式橡胶止水带根据使用情况又可分类为中埋式橡胶止水带和背贴式橡胶止水带。
The back rubber water-stop Mainly with natural rubber and various synthetic rubber as the main raw material, mixed with various additives and fillers, classics plasticate, mixing, pressing molding, the varieties and specifications, with bridge, mountain, P, U, Z, b, T, H, E, Q, etc. The back rubber water-stop buried in according to the usage and can be classified as type rubber water-stop rubber water-stop and back.
背贴式橡胶止水带是采用国家标准GB18173.2-2000《高分子防水材料止水带》组织生产的。 因此我们可以按用户要求生产各种形状、尺寸的橡胶止水带，另外还为不同工程、不同部位的需要备有十字型，丁字型、斜度型和内外转角型产品，可适用于任何设计要求。在止水带产品在运输时，应避免阳光直射，勿与热源、油类及有害溶剂接触。成品应取直平放，勿加重压。存放场所保持-10℃-+30℃，相对湿度在40%-80%。背贴式橡胶止水带适用范围:应用于地下构筑物、水坝、贮水池、游泳池、屋面以及其他建筑物质和构筑物的变形缝防水。
The back rubber water-stop is the national standard GB18173.2-2000 the water-stop polymer waterproof material production. So we can produce all kinds of shapes according to the requirements of customers, the size of the rubber water-stop, also equipped with cross for the needs of different projects, different parts, t type, slope and Angle of inside and outside the product, can be applied to any design requirement. In water-stop product transported, should avoid direct sunlight, do not contact with heat source, oil and harmful solvents. Finished product shall be flat, not increase pressure. Storage places it's better to keep - 10 ℃ - + 30 ℃, relative humidity from 40% to 80%. The back rubber water-stop scope of application: application to underground constructional works, dam, reservoir, swimming pool, roofing and other construction material and structure deformation seam water-proof.
背贴式橡胶止水带是利用橡胶的高弹性，在各种荷载下产生弹性变形，从而起到坚固密封，有效地防止建筑构造的漏水，渗水并起到减震缓冲作用。在许多工程建筑设计中，土建、水土结构之间都有一定的伸缩要求，并存在防水防震等问题，因此采用和安装橡胶止水带是有效地解决以上种种问题的手段。本产品主要用于混凝土现浇时设在施工缝及变形缝内，与混凝土结构成为一体的基础工程、地下设施、隧道涵洞、输水渡槽、挡水坝等，确保工程建设的使用寿命。
The back rubber water-stop is using high elasticity of rubber, produce elastic deformation under various load, thereby solid seal, effectively prevent leakage of building structure, water seepage and shock absorption effect. In many engineering and construction design, civil engineering, water and soil structure has a certain scale, and some problems such as waterproof shockproof, so use and install rubber water-stop is effective means to solve the above problems. When this product is mainly used for cast-in-situ concrete in construction joint and deformation joint, and become one of the basic engineering concrete structure, underground facilities, tunnels culvert, water conveyance aqueduct, retaining dam, etc., to ensure the service life of the project construction.
