MC-TAMR04 51305907-175变频器触发板 返回列表页

MC-TAMR04 51305907-175变频器触发板

MC-TAMR04 51305907-175变频器触发板

                                              产品详情资料：

要自动配置5136-PFB-VME DP主机：

1.运行VME Network Configuration（VME网络配置）程序（5136-PFB-32/Configuration Tools/PFB Network Configuration），并从Open card（打开卡）对话框中选择要使用的VME卡。

2.设置电台地址、波特率并检查***的电台选项。

3.单击“确定"关闭程序

4.运行VME命令实用程序（5136-PFB-32/Configuration Tools/

VME命令），然后再次选择您在步骤1到3中使用的VME卡。

5.从下拉菜单中选择auto_dp_config选项，然后单击Execute。SST ProfiBus卡联机并搜索可配置的DP从设备。当命令状态返回为已完成时，操作完成。要测试auto_dp_cfg命令的结果，请执行以下操作：

仍然使用VME命令实用程序，选择on_line命令。打开DP Monitor程序（5136-PFB-32/Monitor Utilities/DP Monitor），并选择用于auto_DP_cfg命令的卡。

英文产品详细信息

To automatically configure the 5136-PFB-VME DP host:

1. Run the VME Network Configuration program (5136-PFB-32/Configuration Tools/PFB Network Configuration) and select the VME card to use from the Open card dialog box.

2. Set the radio address, baud rate, and check the radio options for * * *.

3. Click 'OK' to close the program

4. Run the VME command utility (5136-PFB-32/Configuration Tools/

VME command), and then select the VME card you used in steps 1 to 3 again.

5. Select auto from the drop-down menu_ dp_ Configure option, and then click Execute. Connect the SST ProfiBus card online and search for configurable DP slave devices. When the command status returns to completed, the operation is completed. To test auto_ dp_ Please perform the following actions for the results of the cfg command:

Still using the VME command utility, select on_ Line command. Open the DP Monitor program (5136-PFB-32/Monitor Utilities/DP Monitor) and select for auto_ DP_ The card for the cfg command.