BENTLY 3500/20 125760-01使用参数工控系统

产品标题: BENTLY 3500/20 125760-01使用参数工控系统PLC/DCS卡件模块自动化设备

型号：  3500/20 125760-01

品牌： 本特利

                                                                              产品详情资料：

BENTLY 3500/20 125760-01高速接口模块（HIM）HIM（高速接口模块）通过高速网关和本地控制网络（LCN）作为Tricon控制器和霍尼韦尔TDC-3000控制系统之间的接口。BENTLY 3500/20 125760-01还可以通过数据通道与BENTLY 3500/20 125760-01控制系统接口。HIM使LCN或数据高速公路上的设备，如计算机和操作员工作站，能够与Tricon控制器通信。HIM模块允许冗余BNC直接连接到数据高速通道，并且具有与***多四个扩展数据高速通道端口（DHP）地址相同的功能容量。BENTLY 3500/20 125760-01提供八个Hiway地址，实现与DHP相同的插槽结构，并且通常在不到0.5秒内刷新所有数据。尽管HIM不是TMR模块，但它支持热备用功能，允许在线更换故障模块。有关更多信息，请参阅HIM用户指南。数据高速通道2个隔离（交流耦合）轮询响应开关每个通道2个波特率250 Kbaud状态指示器：模块状态通过、故障、***BENTLY 3500/20 125760-01

                         产品英文详情料:

Hiway Interface Module (HIM) The BENTLY 3500/20 125760-01 (Hiway Interface Module) acts as an interface between a Tricon controller and a Honeywell TDC-3000 control system by means of the Hiway Gateway and Local Control Network (LCN). The HIM can also interface with a Honeywell TDC-2000 control system by means of the Data Hiway. The HIM enables higher-order devices on the LCN or Data Hiway, such as computers and operator workstations, to communicate with a Tricon controller. The HIMBENTLY 3500/20 125760-01module allows redundant BNC connections directly to the Data Hiway and has the same functional capacity as up to four extended Data Hiway Port (DHP) addresses.BENTLY 3500/20 125760-01The HIM provides eight Hiway addresses, implements the same slot structure as the DHP, and typically refreshes all data in less than 0.5 seconds. Although the HIM is not a TMR module, it fully supports the hot-spare feature, which allows online replacement of a faulty module. For more information, see the HIM User&＃39;s Guide.Data hiway channels 2 isolated (AC-coupled) Poll response switches 2 per channel Baud rate 250 Kbaud Status indicator: Module status Pass, Fault, ActiveBENTLY 3500/20 125760-01

免责声明：

AMIKON我们销售新产品和停产产品，独立渠道购买此类特色产品。阿米控不是本网站特色产品的授权分销商、经销商或代表。本网站上使用的所有产品名称/产品图片、商标、品牌和徽标均为其各自所有者的财产。带有这些名称,图片、商标、品牌和徽标的产品描述、描写或销售仅用于识别目的，并不表示与任何权利持有人有任何关联或授权。