EBLL-90料流检测开关,料流开关对于输送带上输送的物料，使用位于前端的桨叶进行检测。由于桨叶倾斜到一定的角度以上时，内部的微型开关收到挤压从而将是否有物料正在流动作为信号予以输出。料流检测开关用于检测输送带上输送物料的瞬时状态，广泛用于钢铁厂、火力发电厂、水泥厂、化工厂、港口等行业。

EBLL-90料流检测开关技术规格

EBLL-90料流检测开关厂家

技术规格

输出：1C接点 AC250V 5A（阻性负载）

动作角度：20°（对于从桨叶的方向来看，是以顺时针的方向或是以逆时针的方向作为动作的方向 ，请加于）

材质：机体外壳、法兰 铝镁合金   轴、桨叶 SUS304 耐磨橡胶

防护等级：IP65

产品特点

坚固的铸铝外壳、静电防腐涂装适应于恶劣工矿环境安装

适用于各种宽度的胶带安装

浆叶橡胶段可根据使用状况定期更换

结构简单牢固，不需维护

大容量微型触点

EBLL-90料流检测开关,料流开关是利用微型马达做驱动装置，传动轴与离合器相连接，当未接触物料时，马达正常运转，当叶片接触物料时，马达停止转动，检测装置输出一接点信号，同时切断电源停止转动。当物料下降时叶片所受阻力消失，检测装置依靠扭力弹簧恢复到原始状态。针对不同比重的物料扭力大小可以调节。 
广泛应用于冶金、煤炭、水泥、钢铁等行业，尤其是在水泥仓、煤仓等使用环境恶劣的地方。

性能简介：

适用于水泥、冶金、煤碳、饲料、粮食、钢铁、电厂等行业，特别是在导电性物料、物质属性（状态、湿度、介电常数、密度等）经常改变、大粉尘等物料的限位报警应用中表现出色，可用于固态物料的物位度监控，在水泥仓、煤仓、粉尘仓、灰仓等物位的监控中已经被大量使用。电机性能可靠；双倍密封轴承可保证长时间连续运转；油封设计可以防粉尘沿轴渗入；阻旋开关扭力稳定可靠,且扭力大小可以调节；阻旋开关的叶片承受过重负荷时，马达回转机构会自动打滑，保护不受损坏。

产品应用                                                       

冶金、化工、石油、电力、食品、造纸、煤炭、建材、医药等领域料位的报警和控制

尘、防爆等特殊环境

阻旋料位开关的工作原理是利用永磁电机带动叶片旋转，当被检测物料上升至叶片位置时，叶片转动受阻，将该阻力传至接线盒内的检测装置，检测装置则向外输出一个开关信号，并切断电源使叶片停止转动。
当料位下降时，叶片阻力消失，检测装置便依靠弹簧的拉力恢复到原始状态，针对不同的物料比重调整弹簧拉力，比重大时调整弹簧拉力到强或zui强，反之则调整至弱或zui弱。
采用摆动式传动系统。电机底座通过弹簧拉住，当系统没有受阻时，电机转动，带动检测叶片，检测物料。检测板受阻时，使主轴受阻而静止，电机继续运行，使电机底座拉动弹簧，压下微动开关，发出有料信号，同时切断电机电源，电机停止工作。当物位下降时检板阻力消失，系统在弹簧的拉力下复位，微动开关恢复原始状态，使电机转动，同时发出无料信号。

Ebll-90 material flow detection switch, feed flow switch for conveying materials on the conveyor belt, use the blades at the front end for testing. As the blade is tilted to a rtain Angle, the internal microswitch is compressed to make the material flow as a signal to output. The material flow detection switch is used to detect the instantaneous state of conveying materials on the conveyor belt. It is widely used in steel mills, thermal power plants, ment plants, chemical plants, ports and other industries.
Ebll-90 flow detection switch specifications.
Ebll-90 material flow detection switch manufacturers.
Technical specifications
Output: 1C contact AC250V 5A (resistive load)
Action Angle: 20 ° (for from the perspective of the direction of blade, in clockwise direction or in a counterclockwise direction as the direction of the movement, please add to specify)
Material: body shell, flange aluminum magnesium alloy shaft, blade SUS304 wear rubber.
Protection grade: IP65.
Product features
Strong cast aluminum shell, electrostatic anticorrosion coating suitable for the installation of harsh industrial and mining environment.
Suitable for all kinds of wide belt mounting.
The slurry rubber section can be replad periodically according to the use condition.
Simple structure, no maintenan.
Large capacity mini contact.
EBLL - 90 flow detection switch, material flow switch is the use of the micro motor to drive, drive shaft connected to the clutch, when not contact materials, motor function, when the blade contact materials, motor stop running, detection devi contact of output signal, at the same time to cut off the power to stop turning. When the material falls, the blade is removed, and the detection devi is returned to the original state by the torsion spring. The torque size can be adjusted for different weights.
Ebll-90 flow detection switch is widely used in metallurgy, coal, ment, steel and other industries, especially in the ment silo, coal bunker, etc.
Performan profile:
Applicable to the ment, metallurgy, coal, feed, food, steel, power plants and other industries, especially in conductive materials, material properties (status, humidity, dielectric constant and density, etc.) change often, dust and other materials limit alarm application performan, and can be used for solid material level monitoring, the ment warehouse, coal, dust bin, ash warehouse and material level has been extensively used in monitoring. Reliable performan of imported motor; Double seal bearing can ensure continuous operation for a long time; Professional oil seal design can prevent dust from infiltration along the axis; The torsion switch is stable and reliable, and the torque size can be adjusted. When the blade of the choke switch is overloaded, the motor slewing mechanism will automatically slip and protect against damage.
The product application
Alarm and control of materials in metallurgy, chemical industry, petroleum, power, food, paper, coal, building materials, medicine, etc.
High dust, explosion-proof and other special environment.
Resistan spin material level switch working principle is the use of permanent magnet motor drive the blades rotating, when tested material rise to leaf position, blade rotation is blocked, the resistan to terminal box testing devi, testing devi is to output a switch signals, and to cut off the power supply to rotate the blade to stop.
Disappear, when material level drops, blade resistan detection devi will rely on the tension of the spring back to its original state, according to different material proportion adjusting spring tension, adjust the spring tension than when big to strong or the strongest, the opposite adjustment to the weak or the weakest.
Ebll-90 material flow detection switch, the feed flow switch adopts the swing transmission system. The motor base is held by the spring, and when the system is not blocked, the motor turns, driving the detection of the blade and testing the material. Test board is blocked, make main shaft blocked and stationary, motor continues to run, pull the spring makes the motor base, press the micro switch, signal with material, cut off the electrical power supply at the same time, the motor stop working. When the object position drops, the resistan of the inspection plate disappears, the system is reset under the tension of the spring, the micro switch is restored to the original state, and the motor turns and sends out the blanking signal.