江苏春晨电缆有限公司：https://www.afzhan.com/st159127/
1 range
本规范规定了采购“工业凡士林”材料的分类、要求、试验方法、包装、标志、运输及贮存。
The specification of the purchase of "industrial Vaseline" material classification, requirements, test methods, marking, packaging, transportation and storage.
2 采用标准
2 using standard
SH/T 0039-1990 工业凡士林
SH/T 0039-1990 industrial vaseline，JGG高压硅橡胶电机引接线
3 分类
3 Classification
产品按牌号分为1号和2号。
Products are divided into 1 and 2 according to grades.
4 要求和试验方法
4 requirements and test methods
工业凡士林的要求和试验方法符合表1规定。JGG高压硅橡胶电机引接线
Industrial Vaseline requirements and test methods is shown in table 1.
表1 工业凡士林的要求和试验方法
Table 1 Industrial Vaseline requirements and test methods
序号 试验项目 单位 性能指标 试验方法， Test method for unit performance index of serial number test item
1号 2号
2 No. 1
1 外观 — 淡褐色至深褐色均质无块软膏 淡褐色至深褐色均质无块软膏 目测
1 - the appearance of light brown to dark brown homogeneous block light brown to dark brown ointment homogeneous block visual ointment
2 滴熔点 ℃ 45～80 45～80 GB/T 8026
2 drop melting point 45 ~ 8045 ~ 80 ~ GB/T 8026
3 酸值 mgKOH/g ≤0.1 ≤0.1 GB/T 264
The 3 value is less than or equal to 0.1 GB/T 264 mgKOH/g 0.1
4 腐蚀 合格 合格 SH/T 0331
4 corrosion qualified SH/T 0331
5 水溶性酸或碱 无 无 GB/T 259
5 water soluble acid or alkali no no GB/T 259
6 闪点 ℃ ≥190 ≥190 GB/T 3536
The 6 point is more than 190 DEG C for more than 190 GB/T 3536
7 运动粘度（100℃） mm2/s 10～20 15～30 GB/T 265
7 kinematic viscosity (100 C) mm2/s 10 ~ 2015 ~ 30 GB/T 265
8 锥入度（150g，25℃），0.1mm 140～210 80～140 GB/T 269
8 cone penetration (150g, 25 C), 0.1mm 140 ~ 21080 ~ 140 GB/T 269
9 机械杂质 % ≤0.03 ≤0.03 GB/T 511
9 mechanical impurity is less than or equal to 0.03 is less than or equal to 0.03 GB/T 511
10 水分 % 无 无 GB/T 512
10 water% GB/T 512
5 检验规则
5 inspection rules
5.1 检验方法及要求
5.1 inspection methods and requirements
5.1.1 对于定点厂家供应的工业凡士林，产品性能稳定，作隔批抽检。
5.1.1 for fixed-point manufacturers supply industrial Vaseline, stable product performance, for every batch of samples.
5.1.2 对于新厂家供应的工业凡士林，应每批抽检，连续5次抽样均合格，转隔批抽检。
5.1.2 for the new supply of industrial Vaseline, every batch of samples, 5 consecutive sampling all qualified, to every batch of samples.
5.1.3 抽样方法
5.1.3 sampling method
每批任取一包。
Each batch to take a package.
5.2 检测项目
5.2 test items
5.2.1 可检项目为外观、滴熔点、水分、机械杂质。
5.2.1 inspection items for appearance, melting point, moisture, mechanical impurities.
5.2.2 对于无法检测的性能依据生产厂家的检测报告或质保书验收，并进行定期委外检测。
5.2.2 for the performance of the test can not be based on the manufacturer's test report or the quality of the acceptance of the book acceptance, and regular outsourcing testing.
6 包装
6 packaging
包装用清洁、干燥、无锈的200升镀锌铁桶或铁桶包装，桶口应密封，以免漏损，每桶净重（200±0.5）kg。
Packing 200 liters galvanized steel drum or drum with a clean, dry and free of rust, the barrel should be sealed in order to avoid leakage, barrel net weight (200 + 0.5) kg.
7 标志
7 mark
包装外应印有：产品名称、批号、生产日期、净重、生产厂名。
Packaging should be printed with: product name, batch number, production date, net weight, the name of the factory.
8 附件
8 attachment
产品进厂时，随货应有材料生产厂家质量保证书或质量检验单，*供货时，必须附有法定部门的型式试验报告。正常供货时，每年应提供一次法定部门的型式试验报告。
When the product enters the factory, along with the goods should have the material manufacturer quality assurance book or the quality inspection sheet, the first time, must have the legal department the type test report. When the normal supply, the annual report of the type test of the legal department should be provided.
9 运输
9 transportation
运输时轻装轻卸，避免碰撞，防止日晒雨淋。
The transportation light light unloading, avoid collision, prevent the sun and rain.
10 贮存
10 storage
应该存于通风良好，阴凉干燥的库房内，防止日晒雨淋。
Should be stored in a well ventilated, cool and dry place, prevent the sun and rain.
