上海阔志阀门有限公司安装2W水用黄铜、不锈钢电磁阀10个要求
1、水用电磁阀的工作介质应清洁无颗粒杂质，电磁阀内件表面上的污物及过滤器，需定期清洁干净。
2、在电磁阀发生故障时，为了及时隔离电磁阀，并保证系统正常运行，安装旁路装置。
3、安装时电磁阀线圈向上，并保持垂直位置，电磁阀上箭头或标记应与管道流向*，不得安装在有溅水或漏水的地方。
4、在管路系统中，安装在支路上的电磁阀通径应小于主管道阀门的通径。
5、安装电磁阀前，管道必须清洗干净。建议在阀前安装过滤器，蒸汽管道安装疏水阀。
6、不能将阀安装在管道的低凹处，以免因蒸汽冷凝水、杂质等沉淀在阀内而防碍动作。
7、不能在爆炸危险场合使用。
8、在管路刚性不足情况下，建议把阀前管道用支架固定，以免电磁阀工作时引起振动。
9、在安装前，要注意看清产品标牌，认真阅读使用说明书，判断产品是否符合使用条件。
2W water with brass, stainless steel solenoid valve works, 2W water brass, stainless steel solenoid valve in a sealed chamber, at different locations with holes, each hole leads to a different pipeline, the middle chamber is valve, both sides are two electromagnets, which the magnet coil is energized the body surface to which side will be attracted to different file live or leaked oil discharge hole by controlling the movement of the valve body, and into the hole is always open The hydraulic oil will enter a different outlet pipe, 2W water with brass, stainless steel solenoid valve and then through the pressure oil to drive oil just the piston, the piston and drive the piston rod drive mechanism moving. Thus by controlling the solenoid current is controlled mechanical movement
