为您简单介绍下安全滑触线的正确使用方法-苏博滑触线

为您简单介绍下安全滑触线的正确使用方法-苏博滑触线

As you introduce the correct use method - security sliding touch line Su Bo sliding contact line

一般首先遇到的问题是电缆安全滑触线的安装，工地上安装滑线很多都是高空作业，所以工作人员在安装时必须及时的系好安全带，搭好脚手架，保证上下通道顺畅。坚决不能违章操作，后果严重。
Generally the first problem is the cable safety sliding contact line installation, slip line installation site is a lot of work high above the ground, so the crew must be the good safety belt system timely when in installation, setting up the scaffolding, ensure the upper and lower channel smooth. The firm can not be illegal operation, serious consequences.
   二是接线，接线我们一般都是用的是喷灯，如果使用不当回烧伤工作人员，优势也会损坏喷灯设备，所以施工人员在点燃喷灯时要背离人和设备，使用时火焰适当，用完及时熄灭。
Two is the wiring, wiring we usually use is a blowtorch, if improperly used to burn the staff, the advantage will damage the burner equipment, so the construction personnel in the lit torch to back away from the people and equipment, use the appropriate exhausted timely extinguish the flame.
   三需要注意的是配管及电缆敷设。施工人员需要高空作业，容易从高空坠落伤人，所以做好事搭设固定通道。
Three need to pay attention to is the piping and cable laying. Construction personnel need to high altitude operation, easy to fall from the high hurts, so do good erection fixed channel.

扬州市苏博滑触线厂专业生产：滑触线指示灯，安全滑触线，滑触线，电缆滑线导轨，工字钢滑车，扁平电缆，多极组合式滑触线，多极管式滑触线
Yangzhou Su Bo sliding contact wire factory specializing in the production of: sliding contact line indicator, security sliding touch line, sliding touch line, cable slide wire guide rail I-beam, pulley, flat cable, multipole combined slide line, multipolar tube type sliding contact line