吊车中的滑触线怎么安装

吊车设备中会使用滑触线作为配电装置，在一些特殊的场合中，禁止使用滑触线，例如具有腐蚀性的地方。吊车中安装滑触线与吊车的梁平行铺设，与吊车的驾驶室的方向应该是相对的。
Crane equipment used in sliding contact line as a power distribution device, in some special occasions, the prohibition of the use of sliding contact line, such as corrosive place. Install sliding contact line and crane crane beam in parallel arrangement, and the cab of the crane should be the direction of relative.
  滑触线一般都安装在吊车的工字架的支架的上面，滑触线的原料是钢材，滑触线使用的就是角钢，相对于小型的吊车，滑触线可以使用圆钢。在一些特殊的地方，例如寒冷的天气状况下，滑触线选用铜线，在设计的过程中，应该设置单独的开关和短路保护。
The above sliding contact line is generally installed in the bracket of the I-shaped frame crane, sliding contact line is the raw material for steel, sliding contact line is the use of angle, relative to the small crane, trolley line can use bar. In some special places, such as the cold weather condition, sliding touch line selection of copper, in the design process, should set a separate switch and short circuit protection.
  滑触线的开关应该设置在滑触线的附近，这个开关的位置应该便于操作，维修处理。江苏创汇电气科技有限公司专业生产销售滑触线，产品质量安全可靠，热诚欢迎大家的选购。
The switch sliding contact line should be arranged in the vicinity of the sliding contact lines, the switch position should be easy to operate, repair processing. Jiangsu Chuanghui Electric Technology Co. Ltd is a professional production and sales of the sliding contact line, the product quality is safe and reliable, warmly welcome.