通信电缆 网络设备 无线通信 云计算|大数据 显示设备 存储设备 网络辅助设备 信号传输处理 多媒体设备 广播系统 智慧城市管理系统
深圳市源拓光电技术有限公司
深圳市源拓光电技术有限公司
FEATURESlCompliantwith40GEthernetIEEE802
FEATURES
lCompliant with 40G Ethernet IEEE802.3ba and 40GBASE-ER4 Standard
lQSFP+ MSA compliant
lCompliant with QDR/DDR Infinibａnd data rate
lUp to 11.2Gb/s data rate per wavelength
l4 CWDM lanes MUX/DEMUX design
lUp to 40km transmission on single mode fiber (SMF)
lOperating case temperature: 0 to 70 ℃
lMaximum power consumption 2.5W
lLC duplex connector
lRoHS compliant
APPLICATIONS
l40GBASE-ER4 Ethernet Links
lInfinibａnd QDR and DDR interconnects
lClient-side 40G Telecom connections
Mechanical Dimensions
Optical Characteristics
| Parameter | Symbol | Min | Typical | Max | Units | Notes | |
| Wavelength Assignment | L0 | 1264.5 | 1271 | 1277.5 | nm |
| |
|
L1 |
1284.5 |
1291 |
1297.5 |
nm |
| ||
|
L2 |
1304.5 |
1311 |
1317.5 |
nm |
| ||
|
L3 |
1324.5 |
1331 |
1337.5 |
nm |
| ||
| Transmitter | |||||||
| Side Mode Suppression Ratio |
SMSR |
30 |
|
| dB |
| |
| Total Average Launch Power |
PT |
|
|
10.5 | dBm |
| |
| Average Launch Power, each Lane | PAVG |
-2.7 |
|
4.5 | dBm |
| |
| Optical Modulation Amplitude
(OMA), each Lane | POMA |
0.3 |
|
5 | dBm |
1 | |
| Difference in Launch Power between any Two Lanes (OMA) | Ptx,diff |
|
|
4.7 | dB |
| |
| Launch Power in OMA minus Transmitter and Dispersion Penalty (TDP), each Lane |
| -0.5 |
|
| dBm |
| |
| TDP, each Lane | TDP |
|
| 2.6 | dB |
| |
| Extinction Ratio | ER |
5.5 |
|
| dB |
| |
| Relative Intensity Noise |
RIN |
|
| -128 | dB/Hz | 12dB
reflection | |
| Optical Return Loss Tolerance | TOL |
|
| 20 | dB |
| |
| Transmitter Reflectance | RT |
|
| -12 | dB |
| |
| Transmitter Eye Mask Definition {X1, X2, X3, Y1, Y2, Y3} |
|
{0.25,0.4,0.45,0.25,0.28,0.4} |
|
| |||
| Average Launch Power OFF Transmitter, each Lane | Poff |
|
| -30 | dBm |
| |
| Receiver | |||||||
| Damage Threshold, each Lane | THd | 3.3 |
|
| dBm | 2 | |
| Total Average Receive Power |
|
|
| 4.5 | dBm |
| |
| Average Receive Power, each Lane |
|
-21.2 |
| -4.5 | dBm |
| |
| Receiver Reflectance | RR |
|
| -26 | dB |
| |
| Receive Power (OMA), each Lane |
|
|
| -4 | dBm |
| |
| Receiver Sensitivity (OMA), each Lane | SEN |
|
| -19 | dBm |
| |
| Stressed Receiver Sensitivity (OMA), each Lane |
|
|
| -16.8 | dBm |
3 | |
| Difference in Receive Power between any Two Lanes (OMA) | Prx,diff |
|
| 7.5 | dB |
| |
| LOS Assert | LOSA | TBD |
|
| dBm |
| |
| LOS Deassert | LOSD |
|
| -23 | dBm |
| |
| LOS Hysteresis | LOSH | 0.5 |
|
| dB |
| |
| Receiver Electrical 3 dB upper Cutoff Frequency, each Lane | Fc |
|
| 12.3 | GHz |
| |
| Conditions of Stress Receiver Sensitivity Test (Note 4) | |||||||
| Vertical Eye Closure Penalty, each Lane |
|
| 2.2 |
| dB |
| |
| Stressed Eye J2 Jitter, each Lane |
| Per OTL3.4, G.8251 |
|
| |||
| Stressed Eye J9 Jitter, each Lane |
| Per OTL3.4, G.8251 |
|
| |||
Notes:
1.Even if the TDP < 0.8 dB, the OMA min must exceed the minimum value specified here.
2.Thereceivershallbe able to tolerate, without damage, continuous exposure to a modulated optical input signal having this power level on one lane. The receiver does not have to operate correctly at this input power.
3.Measured with conformance test signal at receiver input for BER = 1x10-12.
4.Vertical eye closure penalty and stressed eye jitter are test conditions for measuring stressed receiver sensitivity. They are not characteristics of the receiver.
有关详细信息，请在“相关下载”中查看数据表.
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
智慧城市网 设计制作，未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
