我公司在中国地区总代理德国TWK编码器及传感器产品，德国TWK产品以*的度、可靠性和广泛的可适应性应用于造纸及印刷机械、检测仪表、自动机械、输送系统、起重机、压力控制、测试工作台、天线、纺织机械、模拟器、电机测速反馈等领域，并获得用户的广泛赞誉。其产品主要分为光电式、电磁式、感应式、电位式和磁致伸缩式五大类。
数字式输出系列----Digital Interfaces series
RXM22系列：迷你型电磁编码器带非接触显示传感器，无需内置运动部件，可为仪器仪表和自控设备提供经济的解决方案；
RXM 22 series: Electromagnetic mini-encoders with contactless read-out sensors and without internal moving parts, for economical solutions within instrumentation and automation equipment。
K58系列：型编码器配置高精度光敏元件，分别率可达16位/圈，提供并行输出、同步串行输出和PROFIBUS总线输出；
K58 series: Absolute encoders with high-tech optical sensor, with resolutions up to 16 Bits per 360°.They are available with parallel, serial (SSI) and PROFIBUS interfaces.
CBE系列：13位单圈编码器，可提供提供并行输出、同步串行输出，多种法兰形式，轴负载可达250N；
CBE series: Single turn encoders featuring 13 Bits resolution (8192 positions per 360° and parallel or serial outputs. Items with 3600 positions (1/10 resolution) are also available.
CRE 系列: 多圈编码器，分辨率13位/圈；（可选8192脉冲/圈，3600脉冲/圈，并行或串行输出） 为连接轴可选配多种法兰，轴负载可达250N。
CRE series: Multi turn encoders featuring 13 Bits resolutions (8192 positions per 360° and measuring range of 4096 revolutions with parallel or serial outputs. Various flange configurations for shaft loads up to 250 N are available.
CRS/CRL系列：TWK公司经典的INTERBUS总线输出编码器，总输出量可达25位，强大灵活的可编程设计满足个性化需要；
CRS/CRL series: The classical InterBus encoders with a total capacity of 25 Bits, programmable via the bus network.
CRD系列：高能量的DP-Slave Class 2 PROFIBUS编码器配置后端连接帽或侧处旋转接头，与其他C系列编码器一样，其轴向负载达250N；
CRD series: The robust DP-Slave Class 2 PROFIBUS encoders either with rear connecting cap or with lateral round connector. Alike all the C-series encoders they carry axial and radial shaft loads up to 250 N.
CRD/W+H系列：符合DESINA安装系统要求的式编码器，可选择光纤或铜缆进行数据传输，提供PROFIBUS 输出界面；
CRD/W + H series: Absolute encoders for use within the DESINA installation system, featuring either fiber optical or copper data transmission lines and Han-Brid connectors, with PROFIBUS interfaces.
CRN系列：支持CAN "pur", CANopen or DeviceNet三种CAN总线输出及多种布线装置；
CRN series: Three different versions of CAN encoders with CAN "pur", CANopen or DeviceNet interfaces and various connection layouts.
CRF/CRP系列：支持PC和手持式计算机的多圈可编程编码器，多种输出界面以满足各种特殊应用需求；
CRF and CRP series: Programmable multiturn encoders for configuration either by PC or handhold programmer. Many output features can be chosen to fit specific application requirements.
S系列：在C系列的基础上增加不锈钢外壳以满足恶劣工况的要求，如海洋设备；化工设备和食品加工行业等；
S-series: The C-Series encoders can be supplied with stainless steel housings for use within aggressive ambiance (harbour and naval equipment, chemical plants, food industry etc.).
GIM5000系列：电磁式的增量型编码器，配置霍尔传感器提供每圈700个到5320个计数单位；
GIM 5000 series: Electro-magnetic incremental encoders with Hall sensors are available with 700 different resolutions up to 5320 counts per revolution.
LC57系列：式线性位置传感器，行程可达1500mm,有格雷码、自然二进制码和BCD等编码器方式可选，配备外置永磁执行器；
LC 57 series: Absolute coded linear displacement transducers for strokes up to 1500 mm (Gray, natural binary or BCD) with external permanent magnet actuator.
MP/MS系列：MAGNOSENS磁阻线性位移传感器提供SSI、PROFIBUS-DP和CANOPEN总线输出；
MP and MS series: MAGNOSENS magnetorestrictive linear displacement transducers with, SSI, Profibus-DP or CANopen interfaces.
SWF、SWG及SWH系列：强固型电缆式位移及角度转换器，测量范围达60mm,适用于增量型或型编码器；
SWF, SWG, SWH series: Very robust cable type displacement/angle converters formeasuring ranges up to 60 m and for fitting absolute and incremental encoders.
ZMA系列：齿带式位移/角度转换器适用于增量型及型编码器，可将直线运动转换为旋转运动；
ZWA series: Toothed-belt-type displacement/angle converter for fitting to absolute or incremental encoders and for converting a translational movement into a rotary movement.
模拟量输出系列-----Analogue Interfaces series
RAX系列：电磁式单圈传感器，直径为36mm，可提供0-10VDC及0（4）-20mA输出；
RAX 36 series: Electro-magnetic single turn transducers featuring 36 mm diameter and output signals of 0 to 10 VDC or 0(4) to 20 mA.
KDS/KDK 580系列：直径为58mm的电磁式单圈传感器，可提供0-10VDC及0（4）-20mA输出；
KDS/KDK 580 series: Electro-optical single turn transducers featuring 58 mm diameter and output signals of 0 to 10 VDC or 0(4) to 20 mA.
DAB/DAF系列：旋转式光电传感器，可提供1-4096的分辨率， 输出为0-10VDC及0（4）-20mA；
DAB/DAF series: Electro-optical rotary transducers for featuring ranges from 1 to 4096 revolutions and with output signals 0 to 10 VDC or 0(4) to 20 mA.
IW10/101 系列：微型感应式传感器，量程达15mm,并附外部励磁模块；
IW 10/101 series: Miniature inductive transducers and gauges for ranges up to 15 mm and for excitation by external modules
IW150 系列：校准感应式传感器，量程达15mm，精度为0.25%或0.5%，无限分辨率，无磁滞，可支持弹簧复位连接或球窝接头；
IW 150 series: Calibrated inductive transducers with integral electronics and with ranges up to 15 mm. They can be fitted either with spring returns or with ball joints.
IW120系列：感应式线性传感器，量程zui大可达200 mm，外部电路励磁，可支持弹簧复位连接或球窝接头；
IW 120 series: Inductive linear transducers for strokes up to 200 mm and for excitation be external electronics. They can be fitted either with spring returns or with ball joints.
IWM12/300系列：感应式传感器配置耐压外壳和外部螺纹支架，IP66防护；
IWM 12/300 series: Inductive transducers with pressure proof housings and external mounting threads, either with integral calibrated electronics or for external excitation.
IW250/260系列：行程可达360mm的感应式传感器，可提供0-10VDC及0（4）-20mA输出，可配置弹簧复位连接、球窝接头或防护导管；
IW 250/260 series: Inductive transducers for ranges up to 360 mm and with calibrated output signals of 0 to 10 VDC or 0 (4) to 20 mA. Options are spring returns, ball joints and/or protective guide tubes.
OA/OD/UN系列：可灵活配置振荡器、解调器和放大器的感应换能器，可以分散供应或PC卡集成；
OA/OD/UN series: Oscillator, demodulator, amplifies modules of different configuration for the excitation of inductive transducers. They can be supplied either as separate items or on PC card.
RP 13/RH33 系列：电位式线性传感器配置高寿命导电塑料，能适应苛刻工况，测量行程可达1000mm;
RP 13/RH 33 series: Potentiometric linear transducers with long life conductive plastic resistive elements, for measuring strokes up to 1000 mm.
PMR系列：经济型旋转电位计适用于汽车电子等领域，防水、耐高温、防油及防冻性能较高；
PMR series: : Low cost rotary potentiometers for automotive and similar application, withstanding water, fuel, oil and antifreeze agents.
