东方公司欢迎您
:
RDF400船用雷达反射器 救生筏用雷
达反射器 附CCS证书
RDF400角雷达反射器是配备于救生艇、救生 筏、为增强小雷达目标回波的全向无源装置。它由每个 导电平面互相垂直交叉而构成,平行于入射方向反射入 射波的较大部分。其性能符号标准化组织 ISO8729:1997(E)的技术要求及海事组织IMO决议A-
384(X)决议的规定。
一、结构:(见图)Structure:(See picture 1)
二、主要技术指标:Main technical index (一)、反射面积≥40㎡ (1)Reflection area≥40㎡(See picture 2) (二)、总质量≤1.6Kg (2)Total weight≤1.6Kg |
安装方法 Installation method: 一、将反射器从包装袋中取出,将导电片围绕不锈钢转动轴展开向下、上8个直角三角形,而后将导簧销对准椭圆润孔插入再旋转90°锁住 Take reflection equippment out o packing bag.make the conducting flake surround the stainless steel rctating axis and outspread as 8 right-angle triangle up and down,then insert the spring pin into the ellpse hole and then screw by 90 °to lock(See picture 3、4&5)
二、将不锈钢转动轴中心内的一根不锈钢支杆拔出约20公分然后将塑料固定螺栓螺母旋紧 (2)Pull out a stainless beanpcle in the center of the stainless steel rotating axis by 20cm.then screwlight lastic bolt&nut(See picture 6)
三、将连接在反射器上的20公分支杆从救生艇筏顶蓬洞孔中插入阀体内,然后在筏体内再将其插入不锈钢升降支架中,zui后将升降支架上的全部塑料螺栓旋紧与筏低固定好即可。(见图7) (3)Inset the 20cm long beanpole connected to refletion equippment to the hole on top sail of the raft,then insert it to the stainless steel up-and-down bracket in the body of the raft,at last screw tight all the plastic bolt & nut. make sure they firmly fixed to the bottom of the raft.(See picture 7)
四、建议安装高度:水平面2m Propositonal installation height:2m from level 五、注意事项:Notice (1)安装方法:避免阴影区。Installation Method:To avoid the shadoe area. (2)罗盘的安全距离:2m。 Sfety Distance of Compass:2m.
|